DS18 DX2 with Speaker Installation Kit
Includes: 6.5” Full-Range Component Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 6.5” Full-Range Component Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 460 watts Max Each, 230 watts RMS Each
• 1.18" Silk Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• Mounting Depth: 2.85
Install kits available for this speaker
- Front Door
- Rear Door
- Far-Rear Side Panels with adapters required
• 460 watts Max Each, 230 watts RMS Each
• 1.18" Silk Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• Mounting Depth: 2.85
Crunch CS65CXS (2-Pairs, 4-Total)
1200W Peak (600W RMS) 6.5" CS Series 2-Way Coaxial Car Speakers (2-Pairs)
1200W Peak (600W RMS) 6.5" CS Series 2-Way Coaxial Car Speakers (2-Pairs)
• 300 watts Peak Each, 150 watts RMS Each
• 1" Neo-Mylar Soft Dome Tweeters
• Cellulose cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 300 watts Peak Each, 150 watts RMS Each
• 1" Neo-Mylar Soft Dome Tweeters
• Cellulose cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
NVX VSP69KIT (2-Pairs, 4-Total)
1800W Peak (600W RMS) 6x9" V-Series 2-Way Component Speaker System with 25mm Silk Dome Tweeters (2-Pairs)
1800W Peak (600W RMS) 6x9" V-Series 2-Way Component Speaker System with 25mm Silk Dome Tweeters (2-Pairs)
• 450 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 3.14"
• 450 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 3.14"
Pioneer TS-A693FH (2-Pairs, 4-Total)
1840W Peak (380W RMS) 6x9" A-Series 2-way Coaxial Speakers (2-Pairs)
1840W Peak (380W RMS) 6x9" A-Series 2-way Coaxial Speakers (2-Pairs)
• 460 watts Peak Each, 95 watts RMS Each
• 3/4" PEI (Polyetherimide) Hard Dome Tweeters
• Aramid fiber reinforced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
• 460 watts Peak Each, 95 watts RMS Each
• 3/4" PEI (Polyetherimide) Hard Dome Tweeters
• Aramid fiber reinforced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Infinity Primus 603F (INFSPKPR603C) with PR9693M (INFSPKPR693M)
300W Peak (100W RMS) 6.5” Primus Series 2-way 3-ohm + 360W Peak (120W RMS) 6x9” 3-way 3-ohm Coaxial Car Speakers
300W Peak (100W RMS) 6.5” Primus Series 2-way 3-ohm + 360W Peak (120W RMS) 6x9” 3-way 3-ohm Coaxial Car Speakers
• 150 watts Peak Each, 50 watts RMS Each
• 1/2" Silk Edge-driven Dome tweeters
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohm
• Sensitivity: 92 dB
Save $31 on install kits for this speaker
- Front Door
- Rear Door
- Far-Rear Side Panels
- Far-Rear Side Panels with adapters required
• 150 watts Peak Each, 50 watts RMS Each
• 1/2" Silk Edge-driven Dome tweeters
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohm
• Sensitivity: 92 dB
Alpine DM-65C-G 2 Pairs
800W Peak (200W RMS) 6.5" M Series 2-way 4-ohm Component Car Speakers
800W Peak (200W RMS) 6.5" M Series 2-way 4-ohm Component Car Speakers
• 200 watts Peak Each, 50 watts RMS Each
• Teteron Dome tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
• 200 watts Peak Each, 50 watts RMS Each
• Teteron Dome tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Alpine DM-65C-G with DM-65-G
400W Peak (100W RMS) 6.5" M Series 2-way 4-ohm Component with 400W Peak (100W RMS) 6.5" M Series 2-way 4-ohm Coaxial Car Speakers
400W Peak (100W RMS) 6.5" M Series 2-way 4-ohm Component with 400W Peak (100W RMS) 6.5" M Series 2-way 4-ohm Coaxial Car Speakers
• 200 watts Peak Each, 50 watts RMS Each
• Teteron Dome tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Save $31 on install kits for this speaker
- Front Door
- Rear Door
- Far-Rear Side Panels with adapters required
2 Pairs Kicker 6.5" Speakers (DSC650) w/ Free Speaker Install Kit
Kicker 6.5" DS Series Coaxial Car Speakers with a 12-Piece Panel Removal Tool Kit, NVX Sound Damping Speaker Kit, Roller, and Foam Koozie
Kicker 6.5" DS Series Coaxial Car Speakers with a 12-Piece Panel Removal Tool Kit, NVX Sound Damping Speaker Kit, Roller, and Foam Koozie
- Kicker DSC650 480W Peak 6.5-Inch DS Series 2-Way 4-Ohm Coaxial Car Speakers
- 12-Piece Master Panel Removal Tool Kit for easy installation
- Premium Stealth Black Sound Damping Speaker Kit with two 10-inch x 10-inch sheets
- Universal professional heavy duty rubber roller for sound deadening
- Polyurethane foam can insulator koozie with blue logo
Install kits available for this speaker
- Front Door
- Rear Door
- Far-Rear Side Panels with adapters required
- Kicker DSC650 480W Peak 6.5-Inch DS Series 2-Way 4-Ohm Coaxial Car Speakers
- 12-Piece Master Panel Removal Tool Kit for easy installation
- Premium Stealth Black Sound Damping Speaker Kit with two 10-inch x 10-inch sheets
- Universal professional heavy duty rubber roller for sound deadening
- Polyurethane foam can insulator koozie with blue logo
DS18 PRO-X6M with Speaker Installation Kit
Includes: (2) 6.5” Mid-Range Loudspeaker with Bullet, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit
Includes: (2) 6.5” Mid-Range Loudspeaker with Bullet, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit
• 500 watts Max
• 250 watts RMS
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 90 dB
• Mounting Depth: 2.44"
Save $31 on install kits for this speaker
- Front Door
- Rear Door
- Far-Rear Side Panels with adapters required
• 500 watts Max
• 250 watts RMS
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 90 dB
• Mounting Depth: 2.44"
DS18 PRO-X6.4BMSLIM with Speaker Installation Kit
(2) 6.5” Mid-Range Loudspeakers + 6.5"Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
(2) 6.5” Mid-Range Loudspeakers + 6.5"Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 500 watts Peak
• 250 watts RMS
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• Mounting Depth: 2.15"
Save $31 on install kits for this speaker
- Front Door
- Rear Door
- Far-Rear Side Panels with adapters required
• 500 watts Peak
• 250 watts RMS
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• Mounting Depth: 2.15"
DS18 ZXI-654 with Speaker Installation Kit
Includes: (Pair) 6.5” Coaxial Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping , Roller and Panel Removal Kit
Includes: (Pair) 6.5” Coaxial Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping , Roller and Panel Removal Kit
• 240 watts Max Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89dB dB
• Mounting Depth: 2.36"
Save $7 on install kits for this speaker
- Front Door
- Rear Door
- Far-Rear Side Panels with adapters required
• 240 watts Max Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89dB dB
• Mounting Depth: 2.36"
Hertz X 170 (2-Pairs, 4-Total)
800W Peak (200W RMS) Uno Series 6.75” 2-Way Coaxial Speakers (2-Pairs)
800W Peak (200W RMS) Uno Series 6.75” 2-Way Coaxial Speakers (2-Pairs)
• 200 watts Peak Each, 50 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
• 200 watts Peak Each, 50 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
Hertz X 165 (2-Pairs, 4-Total)
880W Peak (220W RMS) 6.5” Uno Series 2-way Coaxial Speakers (2-Pairs)
880W Peak (220W RMS) 6.5” Uno Series 2-way Coaxial Speakers (2-Pairs)
• 220 watts Peak Each, 55 watts RMS Each
• 3/4" Neodymium Dome Tweeters
• Water Resistance Paper Cone cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
• 220 watts Peak Each, 55 watts RMS Each
• 3/4" Neodymium Dome Tweeters
• Water Resistance Paper Cone cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
Hertz MPX 165.3 (2-Pairs, 4-Total)
800W Peak (400W RMS) 6.5" Mille PRO Series 2-way 4-ohm Coaxial Speakers (2-Pairs)
800W Peak (400W RMS) 6.5" Mille PRO Series 2-way 4-ohm Coaxial Speakers (2-Pairs)
• 200 watts Peak Each, 100 watts RMS Each
• 1" Tetolon Soft Dome Tweeters
• Pressed Pulp Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
• 200 watts Peak Each, 100 watts RMS Each
• 1" Tetolon Soft Dome Tweeters
• Pressed Pulp Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Rockford Fosgate Power T1692 (2-Pairs, 4-Total)
800W Peak (400W RMS) 6x9" 2-Way Power Series Coaxial Speakers (2-Pairs)
800W Peak (400W RMS) 6x9" 2-Way Power Series Coaxial Speakers (2-Pairs)
• Peak Power: 400W each
• RMS Power: 100W each
• 1" Aluminium Dome Tweeter
• Mounting Depth: 3-1/2" • Carbon Fiber and Polypropylene injection Molded Woofer Cone
• 4 Ohm Impedance
• Sensitivity: 90dB
• Peak Power: 400W each
• RMS Power: 100W each
• 1" Aluminium Dome Tweeter
• Mounting Depth: 3-1/2" • Carbon Fiber and Polypropylene injection Molded Woofer Cone
• 4 Ohm Impedance
• Sensitivity: 90dB
4) New Rockford Fosgate R169X2 6x9" 260W 2 Way Car Coaxial Speakers Audio Stereo
260W Max (130W RMS) 6x9" 2-Way PRIME Series Coaxial Speakers Package
260W Max (130W RMS) 6x9" 2-Way PRIME Series Coaxial Speakers Package
• Peak Power: 260W
• RMS Power: 130W
• CEA-2031 Compliant Speakers
• Mounting Depth: 2-7/8" • Polypropylene Woofer Cone
• 4 Ohm Impedance
• Sensitivity: 90dB
• Peak Power: 260W
• RMS Power: 130W
• CEA-2031 Compliant Speakers
• Mounting Depth: 2-7/8" • Polypropylene Woofer Cone
• 4 Ohm Impedance
• Sensitivity: 90dB
(2) JVC CS-DR6940 6x9" 1100 Watt 4-Way Car Speakers+6.5" 300 Watt 2-Way Speakers
550W Peak (90W RMS) 6x9” 4-Way Factory Upgrade Coaxial Speakers - Pair Package
550W Peak (90W RMS) 6x9” 4-Way Factory Upgrade Coaxial Speakers - Pair Package
• 550 Watts Max Each, 90 Watts RMS Each
• Poly-Ether Imide Balanced Tweeter
• Carbon Mica Woofer Cone
• 4 Ohm Impedance
• Frequency Response: 56-21,000 Hz
• 550 Watts Max Each, 90 Watts RMS Each
• Poly-Ether Imide Balanced Tweeter
• Carbon Mica Woofer Cone
• 4 Ohm Impedance
• Frequency Response: 56-21,000 Hz
Alpine HDZ-65C (2-Pairs, 4-Total)
1200W Peak (400W RMS) 6.5” Status Series 2-way Component Speaker System (2-Pairs)
1200W Peak (400W RMS) 6.5” Status Series 2-way Component Speaker System (2-Pairs)
• 300 watts Peak Each, 100 watts RMS Each
• 1-1/4" Carbon Composite Dome Tweeters
• Carbon Composite cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 300 watts Peak Each, 100 watts RMS Each
• 1-1/4" Carbon Composite Dome Tweeters
• Carbon Composite cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Diamond Audio MP694 (2-Pairs, 4-Total)
1200W Peak (600W RMS) 6X9" Motorsport Series Pro Full-Range Compression Integrated Horn Speaker (2-Pairs)
1200W Peak (600W RMS) 6X9" Motorsport Series Pro Full-Range Compression Integrated Horn Speaker (2-Pairs)
• 300 watts Max Each, 150 watts RMS Each
• 1" Horn Tweeters
• Impedance: N/A
• Sensitivity: 101 dB
• Mounting Depth: 3.99"
• 300 watts Max Each, 150 watts RMS Each
• 1" Horn Tweeters
• Impedance: N/A
• Sensitivity: 101 dB
• Mounting Depth: 3.99"
Hertz MLK165.3 (2-Pairs, 4-Total)
600W Peak (300W RMS) 6.5" Mille Legend Series 2-Way 4 Ohm component speaker system (2-Pairs)
600W Peak (300W RMS) 6.5" Mille Legend Series 2-Way 4 Ohm component speaker system (2-Pairs)
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 91 dB
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 91 dB







































