DS18 ZXI-62C with Speaker Installation Kit
Includes: 6.5” Component Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 6.5” Component Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 160W RMS 6.5 ZXI Series Component Speakers w/ Silk Dome Tweeters
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Save $14 on install kits for this speaker
- Front Door with adapters required
- Rear Door with adapters required
• 160W RMS 6.5 ZXI Series Component Speakers w/ Silk Dome Tweeters
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Hertz X 170 (2-Pairs, 4-Total)
800W Peak (200W RMS) Uno Series 6.75” 2-Way Coaxial Speakers (2-Pairs)
800W Peak (200W RMS) Uno Series 6.75” 2-Way Coaxial Speakers (2-Pairs)
• 200 watts Peak Each, 50 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
• 200 watts Peak Each, 50 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
Hertz X 165 (2-Pairs, 4-Total)
880W Peak (220W RMS) 6.5” Uno Series 2-way Coaxial Speakers (2-Pairs)
880W Peak (220W RMS) 6.5” Uno Series 2-way Coaxial Speakers (2-Pairs)
• 220 watts Peak Each, 55 watts RMS Each
• 3/4" Neodymium Dome Tweeters
• Water Resistance Paper Cone cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
• 220 watts Peak Each, 55 watts RMS Each
• 3/4" Neodymium Dome Tweeters
• Water Resistance Paper Cone cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
Hertz SV 165 NEO (2-Pairs, 4-Total)
1600W Peak (600W RMS) 6.5" SPL Show Series 4-ohms Midrange Car Speakers (2-Pairs)
1600W Peak (600W RMS) 6.5" SPL Show Series 4-ohms Midrange Car Speakers (2-Pairs)
• 400 watts Peak Each, 150 watts RMS Each
• 1-1/2" Dome Tweeters
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB
• 400 watts Peak Each, 150 watts RMS Each
• 1-1/2" Dome Tweeters
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB
Hertz MPX 690.3 (2-Pairs, 4-Total)
1040W Peak (520W RMS) 6x9" Mille PRO Series 3-way 4-ohm Coaxial Speakers (2-Pairs)
1040W Peak (520W RMS) 6x9" Mille PRO Series 3-way 4-ohm Coaxial Speakers (2-Pairs)
• 260 watts Peak Each, 130 watts RMS Each
• 1" Tetolon Dome Tweeters
• Pressed Pulp Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• 260 watts Peak Each, 130 watts RMS Each
• 1" Tetolon Dome Tweeters
• Pressed Pulp Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
Infinity PR9693M (2-Pairs, 4-Total)
720W Peak (240W RMS) 6x9” Coaxial Car Speakers (2-Pairs)
720W Peak (240W RMS) 6x9” Coaxial Car Speakers (2-Pairs)
• 180 watts Peak Each, 60 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB
• 180 watts Peak Each, 60 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB
Infinity Kappa 693M (INFSPKKA693MAM) (2-Pairs, 4-Total)
1440W Peak (480W RMS) Kappa Series 6x9” 3-Way Speakers (2-Pairs)
1440W Peak (480W RMS) Kappa Series 6x9” 3-Way Speakers (2-Pairs)
• 360 watts Peak Each, 120 watts RMS Each
• Silk Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 94 dB
• 360 watts Peak Each, 120 watts RMS Each
• Silk Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 94 dB
MB QUART RS1-269 (2-Pairs, 4-Total)
480W Peak (240W RMS) 6x9" Reference Series 2-Way Component Speaker System (2-Pairs)
480W Peak (240W RMS) 6x9" Reference Series 2-Way Component Speaker System (2-Pairs)
• 120 watts Peak Each, 60 watts RMS Each
• 3/4" Titanium Dome Tweeters
• Bamboo Fiber Cone cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 120 watts Peak Each, 60 watts RMS Each
• 3/4" Titanium Dome Tweeters
• Bamboo Fiber Cone cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Pioneer TS-A6991F (2-Pairs, 4-Total)
2800W Peak (560W RMS) 6x9" A-Series 5-way Coaxial Speakers (2-Pairs)
2800W Peak (560W RMS) 6x9" A-Series 5-way Coaxial Speakers (2-Pairs)
• 700 watts Peak Each, 120 watts RMS Each
• 3/4" Polyetherimide Dome Tweeters
• Carbon and Mica Reinforced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
• 700 watts Peak Each, 120 watts RMS Each
• 3/4" Polyetherimide Dome Tweeters
• Carbon and Mica Reinforced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Alpine DM-65C-G with DM-65-G
400W Peak (100W RMS) 6.5" M Series 2-way 4-ohm Component with 400W Peak (100W RMS) 6.5" M Series 2-way 4-ohm Coaxial Car Speakers
400W Peak (100W RMS) 6.5" M Series 2-way 4-ohm Component with 400W Peak (100W RMS) 6.5" M Series 2-way 4-ohm Coaxial Car Speakers
• 200 watts Peak Each, 50 watts RMS Each
• Teteron Dome tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Save $31 on install kits for this speaker
- Front Door with adapters required
- Rear Door with adapters required
Kicker CS Series Speakers (CSC35, CSC65, CSC693) w/ Free Speaker Install Kit
Kicker 3.5", 6.5", and 6x9" CS Series Speakers with Panel Removal Tool Kit, NVX Sound Damping Kit, Rubber Roller, and Koozie Accessory Bundle
Kicker 3.5", 6.5", and 6x9" CS Series Speakers with Panel Removal Tool Kit, NVX Sound Damping Kit, Rubber Roller, and Koozie Accessory Bundle
- Kicker 180W Peak 3.5-inch CS Series 2-Way Coaxial Speakers
- 600W Peak 6.5-inch CS Series 2-Way Coaxial Speakers
- 900W Peak 6x9-inch CS Series 3-Way Coaxial Speakers
- Complete installation tool kit with 12-piece panel removal set
- Pro sound damping bundle includes two 91mil sheets and rubber application roller
Free or discounted install kits when available.
- Kicker 180W Peak 3.5-inch CS Series 2-Way Coaxial Speakers
- 600W Peak 6.5-inch CS Series 2-Way Coaxial Speakers
- 900W Peak 6x9-inch CS Series 3-Way Coaxial Speakers
- Complete installation tool kit with 12-piece panel removal set
- Pro sound damping bundle includes two 91mil sheets and rubber application roller
Hertz MPK163.3 with Speaker Installation Kit
6.5" Mille PRO Series 3-Way 4 Ohm Component speaker system
6.5" Mille PRO Series 3-Way 4 Ohm Component speaker system
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
Save $31 on install kits for this speaker
- Front Door with adapters required
- Rear Door with adapters required
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
DS18 PRO-GM6.4PK with Speaker Installation Kit
Includes: (2) 6x9” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 6x9” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 275W RMS 6x9” PRO-X Series Mid-Range Speaker with Bullet and Grille
• 2 Piece Silicone Rubber Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Free or discounted install kits when available.
• 275W RMS 6x9” PRO-X Series Mid-Range Speaker with Bullet and Grille
• 2 Piece Silicone Rubber Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Alpine R2-S69 (2-Pairs, 4-Total)
1200W Peak (400W RMS) 6x9" R-Series 2-Way Coaxial Speakers with Magnesium Hard-Dome Tweeters (2-Pairs)
1200W Peak (400W RMS) 6x9" R-Series 2-Way Coaxial Speakers with Magnesium Hard-Dome Tweeters (2-Pairs)
• 300 watts Peak Each, 100 watts RMS Each
• 1" Magnesium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 300 watts Peak Each, 100 watts RMS Each
• 1" Magnesium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Cerwin Vega H7652 (2-Pairs, 4-Total)
1280W Max (240W RMS) 6.5" HED Series 2-Way Coaxial Car Speakers (2-Pairs)
1280W Max (240W RMS) 6.5" HED Series 2-Way Coaxial Car Speakers (2-Pairs)
• 320 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
• 320 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
NVX VSP69KIT (2-Pairs, 4-Total)
1800W Peak (600W RMS) 6x9" V-Series 2-Way Component Speaker System with 25mm Silk Dome Tweeters (2-Pairs)
1800W Peak (600W RMS) 6x9" V-Series 2-Way Component Speaker System with 25mm Silk Dome Tweeters (2-Pairs)
• 450 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 3.14"
• 450 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 3.14"
NVX XSP692 (2-Pairs, 4-Total)
1800W Peak (600W) RMS X-Series 6x9" 2-Way Coaxial Speakers with Carbon Fiber Cones and 25mm Silk Dome Tweeters (2-Pairs)
1800W Peak (600W) RMS X-Series 6x9" 2-Way Coaxial Speakers with Carbon Fiber Cones and 25mm Silk Dome Tweeters (2-Pairs)
• 450 watts Max Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Lightweight Carbon Fiber cone
• Impedance: 4 ohm
• Sensitivity: 92 dB
• Mounting Depth: 3.07"
• 450 watts Max Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Lightweight Carbon Fiber cone
• Impedance: 4 ohm
• Sensitivity: 92 dB
• Mounting Depth: 3.07"
Pioneer TS-G6930F (2-Pairs, 4-Total)
1600W Peak (180W RMS) 6x9" G-Series 3-Way Coaxial Car Speakers (2-Pairs)
1600W Peak (180W RMS) 6x9" G-Series 3-Way Coaxial Car Speakers (2-Pairs)
• 400W Max Each / 90W RMS Each
• 2" Cone Tweeter, 3/8" Dome Supertweeter
• Injection Molded Polypropylene Cone
• 4 ohm Impedance
• Sensitivity: 90dB
• Mounting Depth: 2-3/4"
• 400W Max Each / 90W RMS Each
• 2" Cone Tweeter, 3/8" Dome Supertweeter
• Injection Molded Polypropylene Cone
• 4 ohm Impedance
• Sensitivity: 90dB
• Mounting Depth: 2-3/4"
Alpine R2-S65 + R2-S69
600W Peak (200W RMS) 6.5" R-Series 2-way 4-ohm + 200W RMS 6x9" Coaxial Car Speakers
600W Peak (200W RMS) 6.5" R-Series 2-way 4-ohm + 200W RMS 6x9" Coaxial Car Speakers
• 300 watts Peak Each, 100 watts RMS Each
• Hi-Res Audio-certified
• 1" Magnesium Hard Dome tweeters
• Reinforced Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Save $31 on install kits for this speaker
- Front Door with adapters required
- Rear Door with adapters required
• 300 watts Peak Each, 100 watts RMS Each
• Hi-Res Audio-certified
• 1" Magnesium Hard Dome tweeters
• Reinforced Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
DS18 DX2 with Speaker Installation Kit
Includes: 6.5” Full-Range Component Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 6.5” Full-Range Component Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 460 watts Max Each, 230 watts RMS Each
• 1.18" Silk Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• Mounting Depth: 2.85
Install kits available for this speaker
- Front Door with adapters required
- Rear Door with adapters required
• 460 watts Max Each, 230 watts RMS Each
• 1.18" Silk Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• Mounting Depth: 2.85






































