(2) DS18 PRO-EXL88 with Speaker Installation Kit
Includes: 6x9” Coaxial Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 6x9” Coaxial Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 240W RMS 6x9” 2-Way ZXI Series Coaxial Speakers w/ PIE Dome Tweeters
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Save $10 on install kits for this speaker
- Front Door with adapters required
• 240W RMS 6x9” 2-Way ZXI Series Coaxial Speakers w/ PIE Dome Tweeters
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Cerwin Vega H7692 (2-Pairs, 4-Total)
1600W Peak (220W RMS) 6x9" HED Series 2-way Coaxial Car Speakers (2-Pairs)
1600W Peak (220W RMS) 6x9" HED Series 2-way Coaxial Car Speakers (2-Pairs)
• 400 watts Peak Each, 55 watts RMS Each
• 1" Metallic Balanced Dome Tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohm
• Sensitivity: 86.5 dB
• 400 watts Peak Each, 55 watts RMS Each
• 1" Metallic Balanced Dome Tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohm
• Sensitivity: 86.5 dB
Hertz MPK163.3 (2-Pairs, 4-Total)
600W Peak (300W RMS) 6.5" Mille PRO Series 3-Way 4 Ohm Component speaker system (2-Pairs)
600W Peak (300W RMS) 6.5" Mille PRO Series 3-Way 4 Ohm Component speaker system (2-Pairs)
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
MTX TERMINATOR6S (2-Pairs, 4-Total)
360W Peak (180W RMS) 6.5" Terminator Series 2-Way Component Speaker System (2-Pairs)
360W Peak (180W RMS) 6.5" Terminator Series 2-Way Component Speaker System (2-Pairs)
• 90 watts Peak Each, 45 watts RMS Each
• 1" Silk Dome Tweeters with inline crossover
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 85.5 dB
• 90 watts Peak Each, 45 watts RMS Each
• 1" Silk Dome Tweeters with inline crossover
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 85.5 dB
MTX TERMINATOR69 (2-Pairs, 4-Total)
480W Peak (240W RMS) 6x9" Terminator Series 2-Way Coaxial Car Speakers (2-Pairs)
480W Peak (240W RMS) 6x9" Terminator Series 2-Way Coaxial Car Speakers (2-Pairs)
• 120 watts Peak Each, 60 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 87.8 dB
• 120 watts Peak Each, 60 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 87.8 dB
NVX VSP69KIT (2-Pairs, 4-Total)
1800W Peak (600W RMS) 6x9" V-Series 2-Way Component Speaker System with 25mm Silk Dome Tweeters (2-Pairs)
1800W Peak (600W RMS) 6x9" V-Series 2-Way Component Speaker System with 25mm Silk Dome Tweeters (2-Pairs)
• 450 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 3.14"
• 450 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 3.14"
Rockford Fosgate Power T1675-S (Pair, 2-Total)
800W Peak (400W RMS) 6.75" Power Series 2-way Component Speaker System (Pair)
800W Peak (400W RMS) 6.75" Power Series 2-way Component Speaker System (Pair)
• 200 watts Peak Each, 100 watts RMS Each
• 1" Cloth Dome Tweeters with integral suspension
• Carbon Fiber filled IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• 200 watts Peak Each, 100 watts RMS Each
• 1" Cloth Dome Tweeters with integral suspension
• Carbon Fiber filled IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
DS18 EXL-SQ6.9 (2-Pairs, 4-Total)
2240W Peak (640W RMS) 6x9” 2-Way EXL Series Coaxial Speakers (2-Pairs)
2240W Peak (640W RMS) 6x9” 2-Way EXL Series Coaxial Speakers (2-Pairs)
• 560 watts Peak Each, 160 watts RMS Each
• 1.14" PEI (Polyetherimide) Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 90 dB
• 560 watts Peak Each, 160 watts RMS Each
• 1.14" PEI (Polyetherimide) Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 90 dB
Alpine DM-65-G 2 Pairs
800W Peak (200W RMS) 6.5" M Series 2-way 4-ohm Coaxial Car Speakers
800W Peak (200W RMS) 6.5" M Series 2-way 4-ohm Coaxial Car Speakers
• 200 watts Peak Each, 50 watts RMS Each
• Teteron Dome tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• 200 watts Peak Each, 50 watts RMS Each
• Teteron Dome tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
DS18 PRO-FR6NEO with Speaker Installation Kit
Includes: 6.5” Full-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 6.5” Full-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 450 watts Max
• 225 watts RMS
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 96 dB
• Mounting Depth: 2.36"
Save $37 on install kits for this speaker
- Rear Door
- Tailgate
- Front Door with adapters required
- Rear Door with adapters required
• 450 watts Max
• 225 watts RMS
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 96 dB
• Mounting Depth: 2.36"
Cerwin Vega H735 (2-Pairs, 4-Total)
1000W Peak (100W RMS) 3.5" HED Series 2-Way Coaxial Car Speakers (2-Pairs)
1000W Peak (100W RMS) 3.5" HED Series 2-Way Coaxial Car Speakers (2-Pairs)
• 250 watts Peak Each, 25 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-Injected Reinforced Spun cone material
• Impedance: 4 ohm
• Sensitivity: 84.5 dB
• 250 watts Peak Each, 25 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-Injected Reinforced Spun cone material
• Impedance: 4 ohm
• Sensitivity: 84.5 dB
Cerwin Vega H7652 (2-Pairs, 4-Total)
1280W Max (240W RMS) 6.5" HED Series 2-Way Coaxial Car Speakers (2-Pairs)
1280W Max (240W RMS) 6.5" HED Series 2-Way Coaxial Car Speakers (2-Pairs)
• 320 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
• 320 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
Hertz DCX160.3 (2-Pairs, 4-Total)
480W Peak (240W RMS) 6” Power Series Full Range Speaker (2-Pairs)
480W Peak (240W RMS) 6” Power Series Full Range Speaker (2-Pairs)
• 120 Watts Max Each, 60 Watts RMS Each
• Water-repellent pressed paper Cone
• Neodymium Tweeter magnet
• 4 Ohm Impedance
• Sensitivity: 93 dB
• 120 Watts Max Each, 60 Watts RMS Each
• Water-repellent pressed paper Cone
• Neodymium Tweeter magnet
• 4 Ohm Impedance
• Sensitivity: 93 dB
Hertz SV 165 NEO (2-Pairs, 4-Total)
1600W Peak (600W RMS) 6.5" SPL Show Series 4-ohms Midrange Car Speakers (2-Pairs)
1600W Peak (600W RMS) 6.5" SPL Show Series 4-ohms Midrange Car Speakers (2-Pairs)
• 400 watts Peak Each, 150 watts RMS Each
• 1-1/2" Dome Tweeters
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB
• 400 watts Peak Each, 150 watts RMS Each
• 1-1/2" Dome Tweeters
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB
Hertz CPK 165 (2-Pairs, 4-Total)
1260W Peak (420W RMS) 6.5" Cento Series 2-Way Component Speaker System (2-Pairs)
1260W Peak (420W RMS) 6.5" Cento Series 2-Way Component Speaker System (2-Pairs)
• 315 watts Peak Each, 105 watts RMS Each
• 1-1/8" Tetolon Dome Tweeters
• Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 92.5 dB
• 315 watts Peak Each, 105 watts RMS Each
• 1-1/8" Tetolon Dome Tweeters
• Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 92.5 dB
JVC CS-DR693 (2-Pairs, 4-Total)
2000W Peak (280W RMS) 6x9'' DRVN Series 3-Way Coaxial Car Speakers (2-Pairs)
2000W Peak (280W RMS) 6x9'' DRVN Series 3-Way Coaxial Car Speakers (2-Pairs)
• 500 watts Peak Each, 70 watts RMS Each
• 19/32 Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB
• 500 watts Peak Each, 70 watts RMS Each
• 19/32 Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB
Kicker DSC65 (43DSC6504) with DSC693 (43DSC69304)
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504) + 720W (180W RMS) 6x9” DS Series 3-way 4-ohm with Integrated Midrange
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504) + 720W (180W RMS) 6x9” DS Series 3-way 4-ohm with Integrated Midrange
• 240 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome zero-protrusion tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
Save $21 on install kits for this speaker
- Rear Door
- Tailgate
- Front Door with adapters required
- Rear Door with adapters required
• 240 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome zero-protrusion tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
Kicker CSC65 (46CSC654) with 6x9" Coaxial Speakers
600W Peak (200W RMS) 6.5” CS Series 2-way 4-ohm Coaxial Car Speakers (CSC654) + 900W Peak (300W RMS) 6x9” CS Series 3-way 4-ohm Coaxial Car Speakers with Integrated Midrange
600W Peak (200W RMS) 6.5” CS Series 2-way 4-ohm Coaxial Car Speakers (CSC654) + 900W Peak (300W RMS) 6x9” CS Series 3-way 4-ohm Coaxial Car Speakers with Integrated Midrange
• 450 watts Peak Each, 150 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome zero-protrusion tweeters with neodymium magnets
• Polypropylene cone material with Extended Voice Coil (EVC) technology
• Impedance: 4 ohm
• Sensitivity: 92 dB
Save $5 on install kits for this speaker
- Rear Door
- Tailgate
- Front Door with adapters required
- Rear Door with adapters required
• 450 watts Peak Each, 150 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome zero-protrusion tweeters with neodymium magnets
• Polypropylene cone material with Extended Voice Coil (EVC) technology
• Impedance: 4 ohm
• Sensitivity: 92 dB
DS18 EXL-SQ6.5 with Speaker Installation Kit
Includes: 6.5” Coaxial Speakers w/ PIE Dome Tweeters, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 6.5” Coaxial Speakers w/ PIE Dome Tweeters, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 400 watts Max Each, 120 watts RMS Each
• 1.14" PEI (Polyetherimide) Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 90 dB
• Mounting Depth: 2.55"
Save $37 on install kits for this speaker
- Rear Door
- Tailgate
- Front Door with adapters required
- Rear Door with adapters required
• 400 watts Max Each, 120 watts RMS Each
• 1.14" PEI (Polyetherimide) Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 90 dB
• Mounting Depth: 2.55"
DS18 DX2 with Speaker Installation Kit
Includes: 6.5” Full-Range Component Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: 6.5” Full-Range Component Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 460 watts Max Each, 230 watts RMS Each
• 1.18" Silk Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• Mounting Depth: 2.85
Install kits available for this speaker
- Rear Door
- Tailgate
- Front Door with adapters required
- Rear Door with adapters required
• 460 watts Max Each, 230 watts RMS Each
• 1.18" Silk Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• Mounting Depth: 2.85





































