Infinity Primus PR5012IS (PR5012ISAM) (2-Pairs, 4-Total)
480W Peak (160W RMS) 5.25" Primus Series 2-Way Coaxial Car Speakers (2-Pairs)
480W Peak (160W RMS) 5.25" Primus Series 2-Way Coaxial Car Speakers (2-Pairs)
• 120 watts Peak Each, 40 watts RMS Each
• Textile Edge-driven Dome Tweeters
• Polypropylene cone material
• Impedance: 2.7
• Sensitivity: 88 dB
• 120 watts Peak Each, 40 watts RMS Each
• Textile Edge-driven Dome Tweeters
• Polypropylene cone material
• Impedance: 2.7
• Sensitivity: 88 dB
MTX TERMINATOR5 (2-Pairs, 4-Total)
280W Peak (140W RMS) 5.25" Terminator Series 2-Way Coaxial Car Speakers (2-Pairs)
280W Peak (140W RMS) 5.25" Terminator Series 2-Way Coaxial Car Speakers (2-Pairs)
• 70 watts Peak Each, 35 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 85.3 dB
• 70 watts Peak Each, 35 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 85.3 dB
Pioneer TS-A693FH (2-Pairs, 4-Total)
1840W Peak (380W RMS) 6x9" A-Series 2-way Coaxial Speakers (2-Pairs)
1840W Peak (380W RMS) 6x9" A-Series 2-way Coaxial Speakers (2-Pairs)
• 460 watts Peak Each, 95 watts RMS Each
• 3/4" PEI (Polyetherimide) Hard Dome Tweeters
• Aramid fiber reinforced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
• 460 watts Peak Each, 95 watts RMS Each
• 3/4" PEI (Polyetherimide) Hard Dome Tweeters
• Aramid fiber reinforced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
NVX ESP65 with ESP69
120W RMS 6.5" + 160W RMS 6x9" E-Series 2-Way Coaxial Speakers
120W RMS 6.5" + 160W RMS 6x9" E-Series 2-Way Coaxial Speakers
• 180 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
Save $40 on install kits for this speaker
- Front Door with adapters required
- Rear Door with adapters required
• 180 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
Infinity Primus 603F (INFSPKPR603C) with PR9693M (INFSPKPR693M)
300W Peak (100W RMS) 6.5” Primus Series 2-way 3-ohm + 360W Peak (120W RMS) 6x9” 3-way 3-ohm Coaxial Car Speakers
300W Peak (100W RMS) 6.5” Primus Series 2-way 3-ohm + 360W Peak (120W RMS) 6x9” 3-way 3-ohm Coaxial Car Speakers
• 150 watts Peak Each, 50 watts RMS Each
• 1/2" Silk Edge-driven Dome tweeters
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohm
• Sensitivity: 92 dB
Save $40 on install kits for this speaker
- Front Door with adapters required
- Rear Door with adapters required
• 150 watts Peak Each, 50 watts RMS Each
• 1/2" Silk Edge-driven Dome tweeters
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohm
• Sensitivity: 92 dB
Hertz MPK165.3 with Speaker Installation Kit
6.5" Mille PRO Series 2-Way 4 Ohm Component speaker system
6.5" Mille PRO Series 2-Way 4 Ohm Component speaker system
• 110 Watts Max Each, 55 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
Save $40 on install kits for this speaker
- Front Door with adapters required
- Rear Door with adapters required
• 110 Watts Max Each, 55 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
DS18 PRO-X5.4BM with Speaker Installation Kit
Includes: (2) 5.25” Mid-Range Loudspeaker with Bullet, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit
Includes: (2) 5.25” Mid-Range Loudspeaker with Bullet, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit
• 300 watts Max
• 150 watts RMS
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 92.7 dB
• Mounting Depth: 2.6"
Free or discounted install kits when available.
• 300 watts Max
• 150 watts RMS
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 92.7 dB
• Mounting Depth: 2.6"
DS18 ZXI-654 with Speaker Installation Kit
Includes: (Pair) 6.5” Coaxial Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping , Roller and Panel Removal Kit
Includes: (Pair) 6.5” Coaxial Speakers, 2 Piece Foam Speaker Ring Kit, Sound Damping , Roller and Panel Removal Kit
• 240 watts Max Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89dB dB
• Mounting Depth: 2.36"
Save $8 on install kits for this speaker
- Front Door with adapters required
- Rear Door with adapters required
• 240 watts Max Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89dB dB
• Mounting Depth: 2.36"
Hertz CPX 165 (2-Pairs, 4-Total)
1140W Peak (380W RMS) 6.5" Cento Series 2-Way Coaxial Car Speakers (2-Pairs)
1140W Peak (380W RMS) 6.5" Cento Series 2-Way Coaxial Car Speakers (2-Pairs)
• 285 watts Peak Each, 95 watts RMS Each
• 0.9 Tetolon Dome Tweeters
• Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
• 285 watts Peak Each, 95 watts RMS Each
• 0.9 Tetolon Dome Tweeters
• Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
Hertz CK 165L (2-Pairs, 4-Total)
600W Peak (200W RMS) 6.5" Cento Series 2-Way Component Speaker system (2-Pairs)
600W Peak (200W RMS) 6.5" Cento Series 2-Way Component Speaker system (2-Pairs)
• 150 Watts Max Each, 50 Watts RMS Each
•Non Pressed Paper cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
• 150 Watts Max Each, 50 Watts RMS Each
•Non Pressed Paper cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
Memphis SRXP69WTv2 (Pair, 2-Total)
1400W Peak (700W RMS) 6x9" Street Reference Pro Series 2-way 4-ohm Coaxial Speaker with RGB LED Illumination (Pair)
1400W Peak (700W RMS) 6x9" Street Reference Pro Series 2-way 4-ohm Coaxial Speaker with RGB LED Illumination (Pair)
• 350 watts Peak Each, 175 watts RMS Each
• 3" Mylar Horn Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
• 350 watts Peak Each, 175 watts RMS Each
• 3" Mylar Horn Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
DS18 ZXI-654 (2-Pairs, 4-Total)
960W Peak (320W RMS) 6.5" ZXI Series 2-Way Coaxial Speakers (2-Pairs)
960W Peak (320W RMS) 6.5" ZXI Series 2-Way Coaxial Speakers (2-Pairs)
• 240 watts Peak Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• 240 watts Peak Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
Hertz CX 130 with Speaker Installation Kit
6.5" Cento Series 2-Way Component Speaker system
6.5" Cento Series 2-Way Component Speaker system
• 160 Watts Max Each, 55 Watts RMS Each
•Pressed-paper cone cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 92.5 dB
Save $40 on install kits for this speaker
- Front Door with adapters required
- Rear Door with adapters required
• 160 Watts Max Each, 55 Watts RMS Each
•Pressed-paper cone cone material
• Tetolon Tweeter dome
• 4 Ohm Impedance
• Sensitivity: 92.5 dB
Hertz CPK 690 with Speaker Installation Kit
6 x 9" Cento PRO Series 2-Way Component Speaker system
6 x 9" Cento PRO Series 2-Way Component Speaker system
• 360 watts Peak Each, 120 watts RMS Each
• 1-1/4 Tetolon Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
Save $13 on install kits for this speaker
• 360 watts Peak Each, 120 watts RMS Each
• 1-1/4 Tetolon Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
Diamond Audio MP525 (2-Pairs, 4-Total)
600W Max (300W RMS) 5.25" PRO Full-Range Coaxial Horn Driver Speakers (2-Pairs)
600W Max (300W RMS) 5.25" PRO Full-Range Coaxial Horn Driver Speakers (2-Pairs)
• 150 watts Max Each, 75 watts RMS Each
• 1" Aluminum Horn Tweeters
• Sensitivity: 101 dB
• Mounting Depth: 2.99"
• 150 watts Max Each, 75 watts RMS Each
• 1" Aluminum Horn Tweeters
• Sensitivity: 101 dB
• Mounting Depth: 2.99"
Hertz SX 690 NEO (2-Pairs, 4-Total)
1040W Peak (520W RMS) 6X9" SPL Show Series 3-Way Car Speakers (2-Pairs)
1040W Peak (520W RMS) 6X9" SPL Show Series 3-Way Car Speakers (2-Pairs)
• 260 watts Peak Each, 130 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• 260 watts Peak Each, 130 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
Hertz CPX 690 (2-Pairs, 4-Total)
1440W Peak (480W RMS) 6x9" Cento Series 3-Way Coaxial Car Speakers (2-Pairs)
1440W Peak (480W RMS) 6x9" Cento Series 3-Way Coaxial Car Speakers (2-Pairs)
• 360 watts Peak Each, 120 watts RMS Each
• 1-1/4 Tetolon Dome Tweeters
• Pressed paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• 360 watts Peak Each, 120 watts RMS Each
• 1-1/4 Tetolon Dome Tweeters
• Pressed paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
NVX VSP525 (2-Pairs, 4-Total)
960W Peak (320W RMS) 5.25" V-Series 2-Way Coaxial Speakers with 25mm Silk Dome Tweeters (2-Pairs)
960W Peak (320W RMS) 5.25" V-Series 2-Way Coaxial Speakers with 25mm Silk Dome Tweeters (2-Pairs)
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 2.16"
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 2.16"
AudioControl PNW-69CS2 (2-Pairs, 4-Total)
500W Peak (300W RMS) 6x9″ PNW Series 2-way 3-ohm Component Speaker System (2-Pairs)
500W Peak (300W RMS) 6x9″ PNW Series 2-way 3-ohm Component Speaker System (2-Pairs)
• 125 watts Peak Each, 75 watts RMS Each
• 3/4" Silk Dome Tweeters
• Rigid Poly Mica cone material
• Impedance: 3 ohm
• Sensitivity: 88.78 dB
• 125 watts Peak Each, 75 watts RMS Each
• 3/4" Silk Dome Tweeters
• Rigid Poly Mica cone material
• Impedance: 3 ohm
• Sensitivity: 88.78 dB
Diamond Audio DES69C (2-Pairs, 4-Total)
600W Peak (300W RMS) 6x9" Elite Series 2-Way Component Speaker System (2-Pairs)
600W Peak (300W RMS) 6x9" Elite Series 2-Way Component Speaker System (2-Pairs)
• 150 watts Peak Each, 75 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite foam core carbon fiber cone material
• Impedance: 4 ohm
• Sensitivity: 84 dB
• 150 watts Peak Each, 75 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite foam core carbon fiber cone material
• Impedance: 4 ohm
• Sensitivity: 84 dB






































