DS18 PRO-ZT8 with Speaker Installation Kit
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 550 watts Max, 275 watts RMS
• 1" Aluminum Bullet Tweeter
• Impedance: 4 ohm
• Sensitivity: 98 dB
• Mounting Depth: 3.58"
Free or discounted install kits when available.
• 550 watts Max, 275 watts RMS
• 1" Aluminum Bullet Tweeter
• Impedance: 4 ohm
• Sensitivity: 98 dB
• Mounting Depth: 3.58"
Alpine HDZ-653S (2-Pairs, 4-Total)
1200W Peak (400W RMS) 6.5” Status Series Slim-fit 3-way 4-ohm Component Speaker System (2-Pairs)
1200W Peak (400W RMS) 6.5” Status Series Slim-fit 3-way 4-ohm Component Speaker System (2-Pairs)
• 300 watts Peak Each, 100 watts RMS Each
• 1" Dome Tweeters
• Carbon Composite cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 300 watts Peak Each, 100 watts RMS Each
• 1" Dome Tweeters
• Carbon Composite cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Hertz X 170 (2-Pairs, 4-Total)
800W Peak (200W RMS) Uno Series 6.75” 2-Way Coaxial Speakers (2-Pairs)
800W Peak (200W RMS) Uno Series 6.75” 2-Way Coaxial Speakers (2-Pairs)
• 200 watts Peak Each, 50 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
• 200 watts Peak Each, 50 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 93.5 dB
Hertz X690 (2-Pairs, 4-Total)
1360W Peak (340W RMS) 6x9” Uno Series 2-way Coaxial Speakers (2-Pairs)
1360W Peak (340W RMS) 6x9” Uno Series 2-way Coaxial Speakers (2-Pairs)
• 340 watts Peak Each, 85 watts RMS Each
• 3/4" Neodymium Dome Tweeters
• Water Resistance Paper Cone cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• 340 watts Peak Each, 85 watts RMS Each
• 3/4" Neodymium Dome Tweeters
• Water Resistance Paper Cone cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
Hertz SV 165 NEO (2-Pairs, 4-Total)
1600W Peak (600W RMS) 6.5" SPL Show Series 4-ohms Midrange Car Speakers (2-Pairs)
1600W Peak (600W RMS) 6.5" SPL Show Series 4-ohms Midrange Car Speakers (2-Pairs)
• 400 watts Peak Each, 150 watts RMS Each
• 1-1/2" Dome Tweeters
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB
• 400 watts Peak Each, 150 watts RMS Each
• 1-1/2" Dome Tweeters
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB
Hertz MPX 165.3 (2-Pairs, 4-Total)
800W Peak (400W RMS) 6.5" Mille PRO Series 2-way 4-ohm Coaxial Speakers (2-Pairs)
800W Peak (400W RMS) 6.5" Mille PRO Series 2-way 4-ohm Coaxial Speakers (2-Pairs)
• 200 watts Peak Each, 100 watts RMS Each
• 1" Tetolon Soft Dome Tweeters
• Pressed Pulp Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
• 200 watts Peak Each, 100 watts RMS Each
• 1" Tetolon Soft Dome Tweeters
• Pressed Pulp Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB
JBL CLUB 34F (2-Pairs, 4-Total)
300W Peak (100W RMS) 3.5" Club Series 3-ohms 2-way Coaxial Car Speakers (2-Pairs)
300W Peak (100W RMS) 3.5" Club Series 3-ohms 2-way Coaxial Car Speakers (2-Pairs)
• 75 watts Peak Each, 25 watts RMS Each
• Silk Dome Tweeters
• Injection Molded Polypropylene with UV Protection cone material
• Impedance: 3 ohm
• Sensitivity: 89 dB
• 75 watts Peak Each, 25 watts RMS Each
• Silk Dome Tweeters
• Injection Molded Polypropylene with UV Protection cone material
• Impedance: 3 ohm
• Sensitivity: 89 dB
MB Quart PK1-113 (2-Pairs, 4-Total)
440W Peak (220W RMS) 5.25" Premium Series 2-Way Coaxial Speaker (2-Pairs)
440W Peak (220W RMS) 5.25" Premium Series 2-Way Coaxial Speaker (2-Pairs)
• 110 watts Peak Each, 55 watts RMS Each
• 1" Magnesium Dome Tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 85.9 dB
• 110 watts Peak Each, 55 watts RMS Each
• 1" Magnesium Dome Tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 85.9 dB
Memphis SRXP69WTv2 (Pair, 2-Total)
1400W Peak (700W RMS) 6x9" Street Reference Pro Series 2-way 4-ohm Coaxial Speaker with RGB LED Illumination (Pair)
1400W Peak (700W RMS) 6x9" Street Reference Pro Series 2-way 4-ohm Coaxial Speaker with RGB LED Illumination (Pair)
• 350 watts Peak Each, 175 watts RMS Each
• 3" Mylar Horn Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
• 350 watts Peak Each, 175 watts RMS Each
• 3" Mylar Horn Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
Pioneer TS-A1681F (2-Pairs, 4-Total)
1400W Peak (320W RMS) 6.5" A-Series 4-way Coaxial Speakers (2-Pairs)
1400W Peak (320W RMS) 6.5" A-Series 4-way Coaxial Speakers (2-Pairs)
• 350 watts Peak Each, 80 watts RMS Each
• 7/16" Polyetherimide Dome Tweeters
• Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
• 350 watts Peak Each, 80 watts RMS Each
• 7/16" Polyetherimide Dome Tweeters
• Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB
DS18 EXL-SQ5.25 (2-Pairs, 4-Total)
1360W Peak (320W RMS) 5.25" EXL-SQ Series 2-Way Coaxial Car Speakers (2-Pairs)
1360W Peak (320W RMS) 5.25" EXL-SQ Series 2-Way Coaxial Car Speakers (2-Pairs)
• 340 watts Peak Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 86 dB
• 340 watts Peak Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 86 dB
Polk Audio DB6502 DB+ 6.5" 600 Watt Car Speakers with Free 6" x 9" Adapters
600W Peak (200W RMS) 6.5" DB+ Series 2-way Component Speakers with 6" x 9" Speaker Adapters
600W Peak (200W RMS) 6.5" DB+ Series 2-way Component Speakers with 6" x 9" Speaker Adapters
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohm Impedance
• Sensitivity: 92dB
• Mounting Depth: 1.77"
• IP65 rated
•5 1/4" / 6-1/2 Component/Coaxial Speaker to 6" x 9" Adapter
Save $12 on install kits for this speaker
- Front Door with adapters required
- Rear Deck Corner with adapters required
Alpine R2-S69C (2-Pairs, 4-Total)
1200W Peak (400W RMS) 6x9" R-Series 2-Way Component Speakers with Magnesium Hard-Dome Tweeters (2-Pairs)
1200W Peak (400W RMS) 6x9" R-Series 2-Way Component Speakers with Magnesium Hard-Dome Tweeters (2-Pairs)
• 300 watts Peak Each, 100 watts RMS Each
• 1" Magnesium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 300 watts Peak Each, 100 watts RMS Each
• 1" Magnesium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Cerwin Vega H752 (2-Pairs, 4-Total)
1000W Peak (160W RMS) 5.25” HED Series Coaxial Car Speakers (2-Pairs)
1000W Peak (160W RMS) 5.25” HED Series Coaxial Car Speakers (2-Pairs)
• 275 watts Peak Each, 40 watts RMS Each
• 1" Polypropylene Balanced Dome Tweeters
• Graphite Reinforced Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
• 275 watts Peak Each, 40 watts RMS Each
• 1" Polypropylene Balanced Dome Tweeters
• Graphite Reinforced Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
Infinity REF-3032cfx (2-Pairs, 4-Total)
300W Max (100W RMS) 3.5" Reference Series 2-Way Coaxial Car Speakers (2-Pairs)
300W Max (100W RMS) 3.5" Reference Series 2-Way Coaxial Car Speakers (2-Pairs)
• 75 watts Peak Each, 25 watts RMS Each
• 1/2" Textile Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 91 dB
• 75 watts Peak Each, 25 watts RMS Each
• 1/2" Textile Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 91 dB
Infinity Primus 503F (2-Pairs, 4-Total)
960W Peak (320W RMS) Primus Series 5.25” 2-Way Coaxial Car Speakers (2-Pairs)
960W Peak (320W RMS) Primus Series 5.25” 2-Way Coaxial Car Speakers (2-Pairs)
• 120 watts Peak Each, 40 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 91 dB
• 120 watts Peak Each, 40 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 91 dB
JVC CS-DR521 (2-Pairs, 4-Total)
1040W Peak (160W RMS) 5.25'' DRVN Series 2-Way Coaxial Car Speakers (2-Pairs)
1040W Peak (160W RMS) 5.25'' DRVN Series 2-Way Coaxial Car Speakers (2-Pairs)
• 260 watts Peak Each, 80 watts RMS Each
• 1" Polymide Balanced Dome Tweeters
• Carbon Mica cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 260 watts Peak Each, 80 watts RMS Each
• 1" Polymide Balanced Dome Tweeters
• Carbon Mica cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
NVX VSP525 (2-Pairs, 4-Total)
960W Peak (320W RMS) 5.25" V-Series 2-Way Coaxial Speakers with 25mm Silk Dome Tweeters (2-Pairs)
960W Peak (320W RMS) 5.25" V-Series 2-Way Coaxial Speakers with 25mm Silk Dome Tweeters (2-Pairs)
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 2.16"
• 240 watts Peak Each, 80 watts RMS Each
• 1" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• Mounting Depth: 2.16"
Infinity REF-6532ex (REF6532EXAM) + REF-9632ix
330W Max (110W RMS) 6.5" Reference Series 2-way 3-ohm EZ Fit + 600W Max (200W RMS) 6x9" 2-Way Coaxial Car Speakers
330W Max (110W RMS) 6.5" Reference Series 2-way 3-ohm EZ Fit + 600W Max (200W RMS) 6x9" 2-Way Coaxial Car Speakers
• 165 watts Peak Each, 55 watts RMS Each
• Textile Edge-driven Dome tweeters
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohm
• Sensitivity: 93 dB
Save $23 on install kits for this speaker
- Front Door
- Rear Deck Corner
- Front Door with adapters required
- Rear Deck Corner with adapters required
• 165 watts Peak Each, 55 watts RMS Each
• Textile Edge-driven Dome tweeters
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohm
• Sensitivity: 93 dB
2021–Current Ford Bronco Alpine Component Status Plug & Play Speaker Bundle
600W Peak (200W RMS) 6.5” Status Series Hi-Res 2-Way Component 4-ohm Speaker System
600W Peak (200W RMS) 6.5” Status Series Hi-Res 2-Way Component 4-ohm Speaker System
• 300 watts Peak Each, 100 watts RMS Each
• Hi-Res Audio Certified
• 1-1/4" Carbon Composite Cone Tweeters
• Carbon Composite cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 300 watts Peak Each, 100 watts RMS Each
• Hi-Res Audio Certified
• 1-1/4" Carbon Composite Cone Tweeters
• Carbon Composite cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB






































