Polk Audio DB6502 DB+ 6.5" 600 Watt Car Speakers with Free 6" x 9" Adapters
600W Peak (200W RMS) 6.5" DB+ Series 2-way Component Speakers with 6" x 9" Speaker Adapters
600W Peak (200W RMS) 6.5" DB+ Series 2-way Component Speakers with 6" x 9" Speaker Adapters
• 300 Watts Max Each, 100 Watts RMS Each
• 0.75" shallow tweeter design
• Polypropylene UV tolerant cone
• 4 Ohm Impedance
• Sensitivity: 92dB
• Mounting Depth: 1.77"
• IP65 rated
•5 1/4" / 6-1/2 Component/Coaxial Speaker to 6" x 9" Adapter
Save $12 on install kits for this speaker
- Rear Door with adapters required
- Lower Front Door with adapters required
(2) Polk Audio MM652 6.5” 600 Watt Car Audio Speakers+(2) Kicker 5.25" Speakers
(2) 600W 6.5" 2-Way + (2) 450W 5.25" 2-Way Coaxial Package
(2) 600W 6.5" 2-Way + (2) 450W 5.25" 2-Way Coaxial Package
• 180 Watts Max Each, 80 Watts RMS Each Side
• 1", Terylene Fabric Tweeter
• 6.5" Titanium-Plated Polymer Midwoofer Cone
• 4 Ohm Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.62"
• 180 Watts Max Each, 80 Watts RMS Each Side
• 1", Terylene Fabric Tweeter
• 6.5" Titanium-Plated Polymer Midwoofer Cone
• 4 Ohm Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.62"
DS18 PRO-GM6.4PK with Speaker Installation Kit
Includes: (2) 6x9” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 6x9” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 275W RMS 6x9” PRO-X Series Mid-Range Speaker with Bullet and Grille
• 2 Piece Silicone Rubber Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Save $8 on install kits for this speaker
- Lower Front Door
• 275W RMS 6x9” PRO-X Series Mid-Range Speaker with Bullet and Grille
• 2 Piece Silicone Rubber Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
DS18 PRO-X8M with Speaker Installation Kit
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Rubber Roller
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Rubber Roller
• 550 watts Max
• 275 watts RMS
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 98.2 dB
• Mounting Depth: 3.11"
• Sold individually
Free or discounted install kits when available.
• 550 watts Max
• 275 watts RMS
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 98.2 dB
• Mounting Depth: 3.11"
• Sold individually
Diamond Audio DMD52 (2-Pairs, 4-Total)
320W Peak (160W RMS) 5.25" DMD Series 2-way Coaxial Car Speakers (2-Pairs)
320W Peak (160W RMS) 5.25" DMD Series 2-way Coaxial Car Speakers (2-Pairs)
• 80 watts Peak Each, 40 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB
• 80 watts Peak Each, 40 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB
Hertz X690 (2-Pairs, 4-Total)
1360W Peak (340W RMS) 6x9” Uno Series 2-way Coaxial Speakers (2-Pairs)
1360W Peak (340W RMS) 6x9” Uno Series 2-way Coaxial Speakers (2-Pairs)
• 340 watts Peak Each, 85 watts RMS Each
• 3/4" Neodymium Dome Tweeters
• Water Resistance Paper Cone cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• 340 watts Peak Each, 85 watts RMS Each
• 3/4" Neodymium Dome Tweeters
• Water Resistance Paper Cone cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
Memphis SRXP69WTv2 (Pair, 2-Total)
1400W Peak (700W RMS) 6x9" Street Reference Pro Series 2-way 4-ohm Coaxial Speaker with RGB LED Illumination (Pair)
1400W Peak (700W RMS) 6x9" Street Reference Pro Series 2-way 4-ohm Coaxial Speaker with RGB LED Illumination (Pair)
• 350 watts Peak Each, 175 watts RMS Each
• 3" Mylar Horn Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
• 350 watts Peak Each, 175 watts RMS Each
• 3" Mylar Horn Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
Pioneer TS-A1301C (2-Pairs, 4-Total)
1200W Peak (200W RMS) 5.25" A-Series 2-way Component Speaker System (2-Pairs)
1200W Peak (200W RMS) 5.25" A-Series 2-way Component Speaker System (2-Pairs)
• 300 watts Peak Each, 50 watts RMS Each
• 1-3/16" Polyetherimide Hard Dome Tweeters
• Carbon and mica Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
• 300 watts Peak Each, 50 watts RMS Each
• 1-3/16" Polyetherimide Hard Dome Tweeters
• Carbon and mica Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
Pioneer TS-D69F (2-Pairs, 4-Total)
1320W Peak (440W RMS) 6x9” D Series 2-way Coaxial Car Speakers (2-Pairs)
1320W Peak (440W RMS) 6x9” D Series 2-way Coaxial Car Speakers (2-Pairs)
• 330 watts Peak Each, 110 watts RMS Each
• 1" Polyester Fiber Dome Tweeters
• Aramid Fiber Interlaced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
• Mounting Depth: 2 15/16"
• 330 watts Peak Each, 110 watts RMS Each
• 1" Polyester Fiber Dome Tweeters
• Aramid Fiber Interlaced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
• Mounting Depth: 2 15/16"
Kicker CS Series Speakers (CSC35, CSC65, CSC693) w/ Free Speaker Install Kit
Kicker 3.5", 6.5", and 6x9" CS Series Speakers with Panel Removal Tool Kit, NVX Sound Damping Kit, Rubber Roller, and Koozie Accessory Bundle
Kicker 3.5", 6.5", and 6x9" CS Series Speakers with Panel Removal Tool Kit, NVX Sound Damping Kit, Rubber Roller, and Koozie Accessory Bundle
- Kicker 180W Peak 3.5-inch CS Series 2-Way Coaxial Speakers
- 600W Peak 6.5-inch CS Series 2-Way Coaxial Speakers
- 900W Peak 6x9-inch CS Series 3-Way Coaxial Speakers
- Complete installation tool kit with 12-piece panel removal set
- Pro sound damping bundle includes two 91mil sheets and rubber application roller
Free or discounted install kits when available.
- Kicker 180W Peak 3.5-inch CS Series 2-Way Coaxial Speakers
- 600W Peak 6.5-inch CS Series 2-Way Coaxial Speakers
- 900W Peak 6x9-inch CS Series 3-Way Coaxial Speakers
- Complete installation tool kit with 12-piece panel removal set
- Pro sound damping bundle includes two 91mil sheets and rubber application roller
(2) Pairs of Hifonics ZS525CX
400W Max (60W RMS) 5.25" Zeus Series 2-Way Coaxial Car Speakers
400W Max (60W RMS) 5.25" Zeus Series 2-Way Coaxial Car Speakers
• 200 Watts Max Each, 30 Watts RMS Each
• 1" Mylar Balanced Dome Tweeter
• Alpha-Cellulose Cones
• 4Ohm Impedance
• Sensitivity: 88dB
• Mounting Depth: 2"
• 200 Watts Max Each, 30 Watts RMS Each
• 1" Mylar Balanced Dome Tweeter
• Alpha-Cellulose Cones
• 4Ohm Impedance
• Sensitivity: 88dB
• Mounting Depth: 2"
(4) New JVC CS-DR6940 6x9 2200 Watt 4-Way Car Stereo Audio Speakers
550W Peak (90W RMS) 6x9” 4-Way Factory Upgrade Coaxial Speakers - Pair Package
550W Peak (90W RMS) 6x9” 4-Way Factory Upgrade Coaxial Speakers - Pair Package
• 550 Watts Max Each, 90 Watts RMS Each
• Poly-Ether Imide Balanced Tweeter
• Carbon Mica Woofer Cone
• 4 Ohm Impedance
• Frequency Response: 56-21,000 Hz
• 550 Watts Max Each, 90 Watts RMS Each
• Poly-Ether Imide Balanced Tweeter
• Carbon Mica Woofer Cone
• 4 Ohm Impedance
• Frequency Response: 56-21,000 Hz
Hertz MPK163.3 with Speaker Installation Kit
6.5" Mille PRO Series 3-Way 4 Ohm Component speaker system
6.5" Mille PRO Series 3-Way 4 Ohm Component speaker system
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
Save $23 on install kits for this speaker
- Rear Door with adapters required
- Lower Front Door with adapters required
• 150 Watts Max Each, 75 Watts RMS Each
• Pressed-pulp cone with cotton fibers cone material
• Tetolon Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 92 dB
(Pair) DS18 ZXI-654 with Speaker Installation Kit
Includes: (2) 6x9” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 6x9” Mid-Range Loudspeaker, 2 Piece Foam Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 250W RMS 6x9” PRO-SM Series Shallow Water Resistant Mid-Range Speaker
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
Save $8 on install kits for this speaker
- Lower Front Door
• 250W RMS 6x9” PRO-SM Series Shallow Water Resistant Mid-Range Speaker
• 2 Piece Foam Speaker Ring Kit
• 1.38 Square Feet of Sound Damping
• Installer Panel Removal Tool Kit
• Rubber Roller
DS18 PRO-X8.4BMRGB with Speaker Installation Kit
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
Includes: (2) 8” Mid-Range Loudspeaker, 2 Piece Silicone Rubber Speaker Ring Kit, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
• 550 watts Max
• 275 watts RMS
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 96 dB
• Mounting Depth: 3.18"
Free or discounted install kits when available.
• 550 watts Max
• 275 watts RMS
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 96 dB
• Mounting Depth: 3.18"
Alpine R2-S69 (2-Pairs, 4-Total)
1200W Peak (400W RMS) 6x9" R-Series 2-Way Coaxial Speakers with Magnesium Hard-Dome Tweeters (2-Pairs)
1200W Peak (400W RMS) 6x9" R-Series 2-Way Coaxial Speakers with Magnesium Hard-Dome Tweeters (2-Pairs)
• 300 watts Peak Each, 100 watts RMS Each
• 1" Magnesium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
• 300 watts Peak Each, 100 watts RMS Each
• 1" Magnesium Hard Dome Tweeters
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
Diamond Audio DES65C (2-Pairs, 4-Total)
480W Peak (240W RMS) 6.5" DES Series 2-Way Component Speaker System (2-Pairs)
480W Peak (240W RMS) 6.5" DES Series 2-Way Component Speaker System (2-Pairs)
• 60 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite foam core carbon fiber cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
• 60 watts RMS Each
• 1" Aluminum Dome Tweeters
• Composite foam core carbon fiber cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
Hertz K 130 (2-Pairs, 4-Total)
880W Peak (220W RMS) 5.25” Uno Series Component Speakers (2-Pairs)
880W Peak (220W RMS) 5.25” Uno Series Component Speakers (2-Pairs)
• 110 Watts Max Each, 30 Watts RMS Each
• Water-repellent pressed paper cone material
• PEI Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 93 dB
• 110 Watts Max Each, 30 Watts RMS Each
• Water-repellent pressed paper cone material
• PEI Tweeter Dome
• 4 Ohm Impedance
• Sensitivity: 93 dB
Hertz DCX130.3 (2-Pairs, 4-Total)
160W Peak (80W RMS) 5.25" Dieci Series 2-Way Coaxial Car Speakers (2-Pairs)
160W Peak (80W RMS) 5.25" Dieci Series 2-Way Coaxial Car Speakers (2-Pairs)
• 40Watts Max Each, 20 Watts RMS Each
• Water-repellent pressed paper cone material<
• PEI dome tweeter
• 4 Ohm Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2-3/16"
• 40Watts Max Each, 20 Watts RMS Each
• Water-repellent pressed paper cone material<
• PEI dome tweeter
• 4 Ohm Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2-3/16"
Hertz CPK 690 (2-Pairs, 4-Total)
1440W Peak (480W RMS) 6x9" Cento Series 2-Way Component Car Speakers (2-Pairs)
1440W Peak (480W RMS) 6x9" Cento Series 2-Way Component Car Speakers (2-Pairs)
• 360 watts Peak Each, 120 watts RMS Each
• 1-1/4 Tetolon Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
• 360 watts Peak Each, 120 watts RMS Each
• 1-1/4 Tetolon Dome Tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB






































