Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Car Audio & Electronics
  3. Car Amplifiers
  4. 3-Channel Amplifiers

3-Channel Amplifiers

3-Channel amplifiers are perfect for powering a pair of speakers and a subwoofer. Find a large selection of name brand three channel car amps that can deliver clear music.

Filters
Like New & Used ✕
Clear Filters
Reset Done
Brands
JL Audio (1)

We are sorry, no available results!

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Condition
Like New & Used,

Shop the Category

filter-icon Filters & Sort

JL Audio XDM500/3 (Open Box, Great)

500W RMS Class D XDM Series 3 Channel Car and Marine Amplifier

XDM500/3 big
Go to item page Right Arrow Icon of Right Arrow

JL Audio XDM500/3 (Open Box, Great)

500W RMS Class D XDM Series 3 Channel Car and Marine Amplifier

• 75 watts x 2 channel + 180 watts x 1 channel @ 4 ohm
• 100 watts x 2 channel + 300 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm + 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 3-Channel Amplifier

shipping truck icon Free shipping in USA. Provide zip for delivery date.
List price $679.99
-15% $577.99

In stock

Add to Cart

• 75 watts x 2 channel + 180 watts x 1 channel @ 4 ohm
• 100 watts x 2 channel + 300 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm + 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 3-Channel Amplifier

 
    Clear all

    FAQ Frequently asked questions in 3-Channel Amplifiers

    3-Channel Amplifier Frequently Asked Questions (FAQ)
    A 3-channel amplifier offers several benefits, making it a versatile solution for car audio enthusiasts. The amplifier's three channels allow you to power a pair of speakers in the front and a subwoofer, providing a balanced and powerful soundstage. This configuration simplifies the setup, requiring fewer components compared to using separate amplifiers for each speaker type. Additionally, a 3-channel amplifier is ideal for compact installations where space is limited. It reduces wiring complexity and makes the installation process more straightforward. Moreover, using a dedicated channel for the subwoofer ensures optimized bass performance without compromising on the clarity and detail of the front speakers.
    Most 3-channel amplifiers are not designed to be bridged to power a single high-powered subwoofer. Bridgeable amplifiers typically have two channels that can be combined to increase the power output for a single speaker. In a 3-channel amplifier, the third channel is dedicated to powering a subwoofer, and bridging is not supported. Instead, look for mono or single-channel amplifiers designed explicitly for powering subwoofers. These amplifiers offer higher power output and better control over the low-frequency signals, resulting in a more impactful bass performance.
    To ensure compatibility, consider several factors such as power output, impedance, and the number of speakers you intend to power. Check the power ratings of your front speakers and subwoofer to ensure that the amplifier can deliver the required power at the appropriate impedance. Additionally, confirm that the dimensions of the amplifier fit within the available space in your vehicle. Some 3-channel amplifiers come with adjustable crossovers and gain controls, allowing you to fine-tune the audio output to match your specific setup. If you have any uncertainties, consult with an audio specialist or contact Sonic Electronix customer support for expert guidance.
    Yes, a 3-channel amplifier is designed to power a pair of front speakers and a subwoofer at the same time. The two channels dedicated to the front speakers deliver power to create a balanced and immersive soundstage in the car's cabin. Meanwhile, the third channel, specifically designed for low-frequency signals, powers the subwoofer, enhancing bass performance. However, before connecting your speakers and subwoofer to the amplifier, ensure that their impedance ratings match the amplifier's specifications to prevent any potential compatibility issues. Additionally, consider the power requirements of your speakers and subwoofer to ensure that the amplifier can deliver sufficient power to each component for optimal performance.
    While a 3-channel amplifier is designed to power a pair of front speakers and a subwoofer, it is not typically recommended for powering multiple subwoofers. Each subwoofer requires its dedicated channel to receive the optimal power and low-frequency signals for accurate bass reproduction. If you plan to use multiple subwoofers in your car audio setup, consider using a mono or multi-channel amplifier that can deliver the required power to each subwoofer individually. These amplifiers provide more flexibility and control over the bass output, allowing you to achieve a well-balanced and impactful low-frequency performance in your car audio system.

    All About 3-Channel Amplifiers

    3 Channel Amplifier Information

    An amplifier is a component that has been wired between the head unit and the speakers. These are technically a power modulator for the energy that comes from the car battery into the stereo system.

    3 Channel amplifiers are the first step into an updated aftermarket system. The three channels allow for a subwoofer to be paired with a subwoofer. This type of setup is ideal for smaller cars without rear speakers.

    Sonic Electronix Learning Center – How to Bridge an Amplifier

    If you're searching for the best quality 3-channel amplifiers, look no further. Our extensive selection guarantees that you'll find only the finest products to elevate your car audio experience. Whether you crave power and precision or want to customize your audio setup, our range of high-performance 3-channel amplifiers will meet and exceed your expectations.

    3-channel amplifiers are a versatile and powerful solution for upgrading your car audio system. As the name suggests, a 3-channel amplifier has three output channels, typically consisting of two channels for your front component speakers and one channel dedicated to powering a subwoofer. This configuration is ideal for car owners who seek a robust and balanced audio experience, with enhanced clarity for their front speakers and the deep, punchy bass of a subwoofer.

    One of the primary advantages of a 3-channel amplifier is its efficiency in consolidating the power for both your front speakers and subwoofer into a single unit. This not only saves space but also reduces the need for multiple amplifiers, making installation more straightforward and efficient.

    Moreover, 3-channel amplifiers offer a bridgeable feature that allows you to combine the power of two channels to power a more potent subwoofer or component speakers. This flexibility provides you with the freedom to tailor your car audio system to suit your preferences and achieve the perfect balance between your front speakers and subwoofer.

    At Sonic Electronix, we are committed to helping you find the best 3-channel amplifiers that align with your specific requirements. Our team of car audio experts is dedicated to providing exceptional service and assistance throughout your shopping journey. If you have any questions or need personalized advice on selecting the perfect amplifier for your car audio system, don't hesitate to reach out to us at 1-502-200-8010. Our friendly staff will be delighted to address your inquiries and ensure you find the ideal 3-channel amplifier to elevate your car audio experience.

    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    1981 Oldsmobile Omega

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 1981 Omega
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo