Customer Ratings & Reviews

their good

It's a good product at a good price, can't say much bad.

Doesn't get much better

These are great ring terminals, they crimp and solder perfectly. They are a bit thin and will bend a bit if you tug on your wires too hard, but all in all they are solid and look great under the hood!

Scosche rocks!

This fits right on my Battery side posts, 3/8" Hole!

0 gauge ring by scosche.

If you looking for a 0 or 2 gauge ring this is what you really need. But, you might say that stinger ring is way better then this one, I tell you they're the same thing from 2 very different companies. Given 2 different names, so the price are different. Plus this will get the job done will.

Work good

fit perfectly on my battery. would definately recomend

perfect!

bought for a great price, and they work great! used them on my big three upgrade, and they soldered nicely!

Good product for the price

I have these on my 0 gauge power cable and ground cable. fit perfect with no problems.

0 AWG ring terminals

Crimpable but much better soldered for best and strongest conection.

Amazing Value, Amazing Product

Good ring terminals for the money

Decent terminals

I wished I would have paid attention to the wire, I have these on some KnuKonceptz 1/0 with is actually 2/0 wire with very little jacket. But I've not had any trouble from them. Would recommend.

They do the job.

Fair quality and working well. Would certainly use them again. Hardest part was finding a crimp method for the larger gauges.

Simple & Affective

Too simple to rate, but the serve their purpose well. If I had to pick a fault it would be the thickness of the platic (thin/hard/cheap).

Rock solid teminals!

They are great terminals which can easily be crimped or soldered, I would buy again. For a few, the price is just right!

acceptable for the price

good and well acceptable connectors for the price, and they do the job.

Exactly What you need

Could not find any 0 gauge ring connectors locally so I checked Sonic and of course they never let me down.

good quality

These terminals are very cost effective. I soldered all connections without a hitch. Thanks again sonic!

Good Value

This is my first time dealing with 1/0 gauge wire. These ring termanals are a very good value. They went on easly. I would sugest anyone to use theses.

High Quality For Low Money

These are great work everytime very reliable and buy atleast two packs every order because for some reason theyre so expensive locally or most places just dont sell 0 gauge anything.....

A MUST BUY

Top Quality and best value for what the other name brand stuff would cost...definitly a must buy and would recommend these for anyone.

Worked perfect

I used these ends on a 1O wire. Just either use professional crimps or use a nice pair of pliers and solder your joints afterwords.

Nice

had to wire brush through the chrome to get to the bare metal but are still very solid

Thank you it works

Well ain't much to say but it works, and it did,,

They work.

O gauge ring terminals what can I say, they work.

Good price

Easy to solder.

The perfect terminals for any system

You can't beat these ring terminals in price, if you want something cheap that will hold up to some abuse, these are for you. The only problem I had was when it came to soldering, you have to use sandpaper to rough up the inside part of the connector, other than that, they work like a charm.

Great Value

Very easy to use and very durable. I have no problem at all with this. Plus its good buy for the price. Using for power and ground and have been for about 7 months.

Great

You work great when you sodier them if you dont a lil tug on wire and it will come out and burn something out.

Solid

I bought these to do the big three upgrade and for the price they are a good deal. A little flimsy if you work them over a bit but otherwise no problems.

Good value

for the price these are great, about half as thick as my Kicker terminals but these get the job done

Best ring terminals for price

This was a good price, for terminals. Make sure to get a different tool other then your regular crimper, because that wont work with these. These terminals are huge and tuff!

great price, entry level quality

Works good, but only if you can crimp the wire outside the car. First use a vice on one side then the other and then use a hammer and nail (or small punch) after to really dig into the metal and lock in the wire. Also they are BIG so you might have to grind down some part of the ring to get it to fit if space is tight (and they will likely corrode eventually).

Get The Job Done!!

These ring terminals get the job done, and are very cheap. This is the way to go

Great Value!

Great price for these ring terminals.

Great

Works very well. Would recommend to anyone.

Battery Ring Terminals

these Ring Terminals works well on my battery terminals

ring connecters

These are an inexpensive way to do an install. If you have the money go with the better streetwires connectors with the set screws. If your on a budget these work just fine.

Gets the job done.

Worked well with my project 6 months so far no rust.

Scosche 0 gauge terminals

Awesome true 0 gauge terminals. I like the fact that they are a tiny lil bit wider and had no problem fitting my 0 gauge thick Rockford Fosgate wire with ease. Very good quality and easy and they're platinum plated.

Exactly what i needed

I don't know what to say about this product. I like it. It does what you need it to do.

great for budget nstal

I got a few pakz of thez ring terminals to do the big 3. I thought they wuld b really cheesy fa the price, but they r quite solid. Very e z ta use and has nice big holes to mount on juz bout any size bolt witout any xtra filing or drilling out. Duz the job perfect. Kuldnt ask for nun more. Xspecially on the price. Sonic Electronix is the #1 place fa me when I shop anythang car audio. So dont hesitate to buy these ring terminals to kuz they do get the job done rite!

They get the job done

I don't have a crimp tool and all shops I went to didn't have the tools necessary to crimp 0 gauge wire, but these were easy to crimp using a pair of pliers.

Great product.

Good Deal

Serve their purpose very well...durable, good quality, great price. Highly recommend.

BUY OVER NAME BRAND!!!!

These terminals are solid, i soldered them. which has held my 0 gauge VERY strong. Their super cheap and way better than namebrand terminals that are 3x as much. BUY THESE for sure!!!

Gets the job done

I bought a lot of smaller guage wire holders and tried to make them work but the wire always fell out. Now I've got these and they haven't moved since. Simple as that.