See all parts that fit your 2017 Model 3
6.5" Single 8 ohm Competition Midrange Woofer Bass Driver
Product highlights
• Peak Power: 350W
• RMS Power: 175W
• Spun Aluminum Phase Plug
• Mounting Depth: 2-13/16"
• Non-Pressed Poly treated Paper Woofer Cone
• 8 Ohm Impedance
• Sensitivity: 96dB
NVX PBK-TM3-VSW10S2 - 2017-2022 Tesla Model 3 - Complete Bass Package
For select 2017-2022 Model 3 - 10" 500W RMS Complete Amplified Subwoofer Bass Package Solution
$609.99
List price $1028.96
NVX Tesla Model 3 Sub Box - BE-TM3-G1 BOOST Box
Custom Fit 500W RMS 10" Loaded BOOST Subwoofer Enclosure for 2017-Up Tesla Model 3
$279.99
List price $562.99
500W Peak (200W RMS) Loaded Single 10" Sealed Enclosure with Monoblock Amplifier for select 2017-2025 Model 3 with Factory-Equipped Premium Audio
$899.95
List price $1200.00
3.5" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$189.99
List price $211.99
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$156.99
List price $174.99
10" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$250.00
List price $275.00
500W Peak (200W RMS) Loaded Single 10" Sealed Enclosure and Monoblock Amplifier for select 2017-2025 Model 3
$899.95
List price $1200.00
500W Peak (200W RMS) Loaded Single 10" Sealed Enclosure with Monoblock Amplifier for select 2017-2023 Model 3 with Factory-Equipped Base Audio
$999.95
List price $1200.00
Priced Individually
Best selling similar products
• 300 watts Peak Each, 150 watts RMS Each
• Polymide Horn Tweeters
• Treated Paper cone material
• Impedance: 4 ohm
• Sensitivity: 101 dB
(2)
$189.99
List price $227.99
Cerwin-Vega CVP8 (Sold Individually)
• 350 watts Peak, 170 watts RMS
• Treated Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
$49.99
List price $59.99
• 500 watts Peak, 120 watts RMS
• Lightweight Rigid Pulp cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
$149.99
List price $150.00
DS18 PRO-X12MBASS (Sold individually)
• 1000 watts Peak Each, 500 watts RMS Each
• Paper cone material
• Impedance: 8 ohm
• Sensitivity: 96 dB
$131.95
List price $131.95
Cerwin Vega CVMPCL8.0 (Sold Individually)
• 400 watts Peak Each, 200 watts RMS Each
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
$139.99
List price $167.99
• 300 watts Peak Each
• Paper cone material
• Impedance: 8 ohm
• Sensitivity: 95 dB
$139.99
List price $170.00
• 1600 watts Peak Each, 800 watts RMS Each
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 99 dB
$129.91
List price $162.39
Rockford Fosgate Punch Pro V2 PPROV2-8
• 150 watts Peak Each, 75 watts RMS Each
• Curvilinear Pressed Pulp cone material
• Impedance: 4 ohm
• Sensitivity: 94.5 dB
$229.99
List price $229.99
Manufacturer:
Model Number:
V2H6MR
Weight:
3.68lbs
Internal SKU:
v2h6mr
Internal Product ID:
41254
| 5 star |
|
60% |
| 4 star |
|
0% |
| 3 star |
|
20% |
| 2 star |
|
0% |
| 1 star |
|
20% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
good speaker
I have no words to describe how good these mid range speaker is do not hesitate to buy them take it from somebody who is doing it big in car audio system. most negative review are people who do not know what they're doing and decide to go cheap
8 found this helpful
Visonik
Had the speakers for about 2 months and found out that they were the worst speakers I have bought. Bass is terrible and not advise anyone buying these.
6 found this helpful
Visonik V2H6MR
Speakers sound great in my system was not sure on the quality of the speakers until I was blasting away on some tunes worth the money
5 found this helpful
Freakin LOUD MIDS
Freaking loud mids! These are just a pure bliss... I will definitely be ordering more.
4 found this helpful
decent
Not competition worthy speakers and will not handle watts claimed.... that said for the money there not bad for use as decent mids that dont cost too much... id recomend them to someone who wasnt a huge audiophile like me.... im just using them as rear filler sending 65-70 watts rms at 75 they start to distort the sound so i backed off my gain till they were clearer and they do the job as rear filler fine and cheap to boot...
2 found this helpful
NVX SDBSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(48)
$14.99
List price $18.74
NVX SDBPRO20 20 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
(4)
$109.99
List price $143.99
NVX SDBBP40 36 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
(39)
$114.99
List price $131.99
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
(51)
$39.99
List price $47.99
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(127)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
Belva 23 ft. of True Spec 12 Gauge Speaker Wire
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
(43)
$6.99
List price $14.99
Belva BTK106 Trim Panel Remover
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(46)
$14.99
List price $19.99
Belva BTK105 Trim Panel Remover
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(73)
$11.99
List price $18.99
Tiger APTG10Z 5.5 Cup Rice Cooker and Steamer
Tiger Jaza10u 5.5 Cup Rice Cooker and Steamer
$79.99
List price $150.00
400W 10" Kompressor Series Subwoofer Bass Tube w/ Passive Radiator, SLAPS Technology
(2)
$159.95
List price $299.95
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
