Expert Service 1-661-257-9993 [Hours]


330W Max 5-1/4" 3-Way Space Series Component Speaker System w/ Protective Steel Mesh Grills (SPACE5)


We apologize

This item has been discontinued

Item Added to Cart


330W Max 5-1/4" 3-Way Space Series Component Speaker System w/ Protective Steel Mesh Grills (SPACE5)


Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.


Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.


NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!



Don't see the accessory you're looking for?
View all available accessories for the VIBE Audio SPACE 5 .

Get FAST answers from customers ASK a Question See questions answers

Unrelenting Performance

The Vibe Audio SPACE 5 3-Way Component-Style speakers are an amazing addition to any audio system. Including four mid-range drivers, two tweeters, and two crossovers this component style speaker set is meant for those who are serious about their audio quality. Integrating a popular silk-dome tweeter design to allow for smooth crisp high range frequencies, these tweeters provide a smooth, warm listening experience.

Mounting a second set of mid-bass drivers can be difficult, but the Vibe Audio SPACE 5 speakers integrate a mounting design for the tweeter to mount on top of the second mid-range driver. When combined, they provide a 360° staged sound and 3D imaging for crisp audio reproduction. Rated to handle 110 watts per side of continuous RMS power these mids and highs will make a great addition for any audio system!

  • 5-1/4" 3-Way Space Series Car Component Speaker System
  • Power Handling
    • Peak: 660 watts per set / 330 watts each side
    • RMS: 220 watts per set / 110 watts each side
    • Minimum: 110 watts per set / 55 watts each side
  • Esoteric aluminum woofer cone
  • Silk dome tweeter diaphragm
  • PU dualroll surrounds
  • 1-3/8" Aluminum voice coil former
  • Front gasket made from high quality machined aluminum
  • Screw down terminals allows heavy gauge cable to be connected directly to the voice coil
  • Removable steel mesh grille provides excellent protection for the speaker
  • Single spider provides control and stability of the woofer cone
  • Separate passive crossover network
  • Extended low frequency response with extreme accuracy
  • Cast aluminum angular torsion chassis offers superior strength and thermal power handling
  • Single ferrite magnet provides motor strength
  • Sensitivity: 90 dB
  • Frequency Response: 60-25,000 Hz
  • Mounting Depth: 2-3/16"
  • Mounting Diameter: 4-3/4"
  • Magnet Material: Neodymium
  • Magnet Weight: 10 oz
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

What is a Vibe Audio Space Speaker?

Vibe Audio Space 3D Speakers

VIBE Space 3D speakers are the pinnacle of in car audiophile quality sound. Engineered without compromise the Space 3D is a truly unique 3 way speaker package that push the boundaries of what you believed was possible.

Alloy Gasket & Steel Mesh Grill:
The front gasket is made from high quality machined aluminum for a high-end aesthetic, and the included steel mesh grill can be used to provide excellent protection to the speaker cone.

Polyurethane Dualroll Surround:
The surround creates precise dampening of the cone with increased bass delivery at low volumes and tight control of the woofer under high volumes.

0.15mm Aluminum Cone:
The high fidelity 0.15mm aluminum cone delivers excellent sound dynamics, and is seamlessly joined to the flanged alloy voice coil for perfect unity, resulting in more efficient cooling.

Single Spider:
A single woven spider provides control and stability for the woofer cone.

Y35 Ferrite Magnet:
The Y35 rated Ferrite magnet is rated for high power handling.

Alloy Torsion Basket
The is machined from cast aluminum for high rigidity and support of the motor and moving parts of the subwoofer. The vented arms of the torsion basket cradle the coil and allow it to breathe cool air when in motion which offers significant performance gains.

Speaker Specifications

This is the manufacturer product line of speakers.
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
3-way Component Speakers
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
330 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
110 watts
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
60 - 25,000 Hz
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches, required to contain the speaker.
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Number of Speakers
This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

Please refer to the product image and description for further details about the speaker.

Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating


San Antonio ,TX


June 23, 2011

I recommend these because they are well made and sound great. I have them hooked up to a vibe black box 4-CH with Monster-304-XLN RCA cables and they sound loud and clear.
Make sure not to use a cheap amp like a Hifonics HFi100.2
Because it will sound distorted when you ease the volume.
Buy a qualety amp.

8 of 9 found this helpful

Was this review helpful to you?


Miami, CA

Vibe Rocks!

September 23, 2010

These speakers are built really well and sound great. They have a bracket that combines the 3" mid and tweet as one. It sounds better that way to me. I am very impressed with the build quality. These are every bit as good as the Kicker RS60's that I had before. I highly recommend them.

5 of 6 found this helpful

Was this review helpful to you?




April 4, 2012

Very Good Product Is Worth Buying
You Can Buy You Will Not Repent

3 of 4 found this helpful

Was this review helpful to you?



don't waste your money

July 30, 2011

These speakers look much bettter than they perform. very bright and harsh sounding. i had to pull them out of my car and install different speakers, first time i ever had to do that. just could not stand to listen to them.

3 of 4 found this helpful

Was this review helpful to you?


bath maine

whell worth the price

September 23, 2011

I am running an set of these and a set of space 6 in an 4 way set up. I am pushing them off a PG900.7TI amp. I have them installed in my BMW 750il. this system cranks. the vibe speakers sound amazing, Loud and clear. I have had a lot of different speakers and I love these. If you can spring for them buy them. Be sure to use an hi end amp as these guys will need the clean power to sound best. I would buy again and I would encourage you to buy. Just be sure you own a very good amp to get the most from them.

2 of 3 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $36.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $20.99

NVX XTGSP2 Tone Generator and Speaker Polarity Tester

Perfect for safely troubleshooting and testing audio systems

Your Price $19.99

Belva Five Piece Installer's Panel Removal Tool Kit

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $13.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $8.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $7.99

Encore Universal Four Door Power Door Lock Kit

Add Power Door Locking and Unlocking while you have the Door Panels removed

Your Price $29.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $47.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $69.97

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $39.95

NVX Sound Dampening Rubber Roller

Install your Sound Dampening with ease using this heavy duty rubber roller!

Your Price $7.99

5" to 5-1/4" Round Foam Speaker Baffles

Creates a tight, acoustic seal behind the speaker to enhance the sound quality.

Your Price $8.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $5.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $12.99

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $11.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary


Model Number






Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: VIBE Audio SPACE 5