Infinity 6.5" + 6" x 9" Speaker Upgrade Kit + NVX Amp & Sound Dampening

Product Features:

• 4 Gauge Single Amp Wiring Kit
• FLUX Power and ground wire made with pure Oxygen Free Copper
• Durable nylon overbraid for extra security
• If you would like to expand this to a Dual Amplifier wiring kit you can use the EFX REVOPAKX.
• 17' 4 Gauge Power cable with Protective Mesh Cover
• 4' 4 Gauge Ground cable
• 17' 2 Channel twisted reVo RCA Cable
• 17' Remote turn-on lead
• Installation Hardware and instructions
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

General Features:

• Class D 4-Channel Amplifier
• CEA-2006 Compliant
• Peak Power Rating: 1600
• RMS Power Rating:
• 4 ohm: 125 watts x 4 chan.
• 2 ohm: 200 watts x 4 chan.
• Bridged, 4 ohm: 400 x 2 chan.
• Sonic Electronix Certified Power Rating*:
• 4 ohm: 175 watts x 4 chan.
• 2 ohm: 297 watts x 4 chan.
• Non-regulated efficient S.M.P.S power supply design
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• High speed rectifying diodes
• Soft start turn-on
• 4, 3, or 2 channel operation
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink
• Nickel-plated RCA level inputs
• Nickel-plated screw terminals
• Input sensitivity: 200mV - 6V
• Frequency Response: 20 - 20,000 Hz
• Total Harmonic Distortion (THD): <1.00%
• Signal to Noise Ration: 106dB
• Selectable crossover modes: BPF / FULL / LPF
• x1 & x10 Frequency multiplier, Front & Rear
• Variable high-pass filter: 20 - 400 Hz or 200 - 4,000 Hz, 24 dB/octave
• Variable low-pass filter: 50 - 500 Hz or 500 - 5,000, 24 dB/octave
• Fuse Rating: 25A x 3
• Gauge adapter included, allowing amplifier to accept 8, 4, 2, and 1/0
• 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
• Dimensions: 6-7/10"W x 10-4/10"L x 1-8/10"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Extend your NVX Manufacturer's Warranty to 2 Years when you install your new NVX amplifier with a compatible NVX power installation kit! This offer is only available through Authorized NVX dealers and will only last for a limited time. With this amplifier, the following power kits will qualify for the extended warranty program: NVX XAPK1D, NVX XKIT44, or NVX XAPK4

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

General Features:

• 6" x 9" Kappa Series 2-way Speakers
• Power Handling:
• Peak: 660 watts per pair / 330 watts each
• RMS: 220 watts per pair / 110 watts each
• Woven glass fiber cone woofer
• Rubber surround
• Edge driven MMD dome tweeter
• Unipivot patented rotating tweeter allows tweeter to be directed at the listener's location
• Direct connect computer-optimized, voice-matched outboard passive crossover for superb detail and accuracy
• Tweeter level adjustment on tweeter by simply rotating the tweeter to add or subtract 3 dB output
• 2 ohm impedance
• Top-mount depth: 3-1/4"
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Priced Per Pair

General Features:

• 6-1/2" Kappa Series 2-way Speakers
• Power Handling:
• Peak: 450 watts per pair / 225 watts each
• RMS: 150 watts per pair / 75 watts each
• Woven glass fiber cone woofer
• Rubber surround
• Edge driven MMD dome tweeter
• Intermount III mounting system - Allows for installation of the 62.9i in all 6-1/2" hole size standards without the need to purchase additional adaptors or mounting kits
• Unipivot patented rotating tweeter allows tweeter to be directed at the listener's location
• Direct connect computer-optimized, voice-matched outboard passive crossover for superb detail and accuracy
• Tweeter level adjustment on tweeter by simply rotating the tweeter to add or subtract 3 dB output
• 2 ohm impedance
• Top-mount depth: 3-1/4"
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Priced Per Pair

Product Features

• One 18" x 32" Piece of Sound Dampening Material
• 90.55mil thick (2.3mm)! There are cheaper, inferior solutions at 50-80mil, but we do not recommend that thin of a solution as it will not perform as well.
• 4 Square feet total
• Made from 100% Butyl Rubber
• Eliminates road noise
• Quiets vibrations
• Increases sound quality and output of car audio system
• Stops rattles
• Increases SPL
• Reduces heat
• Easy to form aluminum conforms to desired area of vehicle with ease
• Four step peel and stick design for easy installation
• Up to 30% thicker than the leading competitors
• Dimensions: 18"L x 32"W
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty