Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
Newest Product
Filters
Kenwood ✕
Clear Filters
Reset Done
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.
Top-Mount Depth (Mounting Depth)
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Results are filtered to show products that fit or work with your 2016 Lexus IS200t

Change vehicle Shop without vehicle
filter-icon Filters & Sort

Kenwood KFC-W2542

1300W Peak (300W RMS) 10" Single 4-ohm Car Subwoofer

KFC-W2542 big
Go to item page Right Arrow Icon of Right Arrow

Kenwood KFC-W2542

1300W Peak (300W RMS) 10" Single 4-ohm Car Subwoofer

• Peak Power: 1300 watts
• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Foam Surround
• Mount depth: 5-1/4"
• Sensitivity: 82 dB

shipping truck icon Free shipping in USA. Provide zip for delivery date.

Universal Icon Universal – fits most vehicles.

Shop similar products or Update vehicle

List price $160.00
-19% $130.00

In stock

Only 2 Left!

Add to Cart

• Peak Power: 1300 watts
• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Foam Surround
• Mount depth: 5-1/4"
• Sensitivity: 82 dB

 
    Clear all
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2016 Lexus IS200t

    2018 Dodge Challenger

    1982 Oldsmobile Toronado

    2006 Lexus GS300

    2016 Volkswagen Passat

    2000 Volkswagen Passat

    2003 Mercury Sable

    2003 Volkswagen Golf

    2009 Hummer H2

    2013 Lexus IS-F

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This page was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2016 IS200t
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo