See all parts that fit your 1995 Summit
Versa Kit - 8 Square Feet of Sound Dampening Material (Two 18" x 32" Piece)
Product highlights
• Eliminates Road Noise
• 2.3mm (90.55mil) thick for better performance
• Quiets Vibrations
• Stops Rattles
• Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Two 18" x 32" Piece
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
600W Peak (300W RMS) 6.5" Mille PRO Series 3-way 4-ohm Component Speaker System
$999.99
List price $1175.00
250W Peak (200W RMS) 6.5″ PNW Series 2 Way Component 3-ohm Speakers
$319.00
List price $339.00
600W Peak (70W RMS) 6.5" XED Series 2-Way Coaxial 4-ohm Speakers
$49.99
List price $59.99
Sound dampening material is key to reducing the rattles and shakes in your car. It effectively reduces the amount of road noise that is let in through the thin panels of your vehicle. It also lessens vibrations that are created by playing music through your speakers. It works by adding weight to the desired panel, which lowers the resonating frequency. You will notice by adding this material to your car, your sound system will likely get noticeably louder. If you have subwoofers, this is the perfect kit for your vehicle.
NVX is one of the world's leading manufacturers of sound dampening material, and is up to 30% thicker than the other brands. Don't pay ridiculous amounts of money to kill those rattles, when you can get everything you need from NVX for a fraction of the price. With the SDVK4 dampening material, you will notice a higher quality sound from your system as well as a drastic reduction of road noise. With 4 square feet of material, you will have enough to cover all of those problem areas that have been bothering you for so long!
| Best Value! | |||
|
|
|
|
|
NVX SDVK4 |
Dynamat 10425 |
Stinger RKX4 |
|
|
Price |
$14.99 |
$28.99 |
$25.99 |
|
Total Sq. Ft. |
4 Sq. Ft. | 4 Sq. Ft. | 4 Sq. Ft. |
|
Total Thickness |
2.3mm | 1.7mm | 2.0mm |
|
Material |
100% Butyl Rubber & Aluminum Foil |
Butyl Rubber & Aluminum Foil |
Butyl Rubber & Aluminum Foil |
|
Self-Adhesive Back |
 |
|
|
| Dimensions |
One Sheet: |
One Sheet: |
Two Sheets: |
Sound damping can be a very beneficial accessory to reduce noise and vibration. To take full advantage of this soundproofing, read these instructions carefully and follow them till the end. It’s important to familiarize yourself with all the details to install the sound damping correctly. Incorrect installation will result in less than desirable results.
Step #1
The first step is to decide which location in your car you want to insulate. These locations include the floorboards, roof, door panels, trunk or firewall. We recommend soundproofing all metal surfaces for maximum sound deadening performance. Next, refer to your vehicle’s service manual for information on how to dismantle the trimming panels. Be careful when removing the panels to avoid breaking the fixing clips.
Step #2
Once the trimming is dismantled, remove the remainder of the factory insulation if it is damaged. If it is still intact, there is no need to permanently remove it. Next, you need to properly clean, dry and degrease the prospective surface. Sound deadening won't adhere properly if applied to a wet or dirty surface. Use a metal surface cleaner or degreaser along with a dry, clean rag. Make sure to use gloves and apply the degreaser in a well-ventilated space.
Step #3
For this step, measure the prospective surface you are going to treat. To make things easier, make a template of the appropriate size on a large sheet of paper and then transfer it to the damping material. That will make it easier to install it more accurately and avoid wasting material. Use a utility knife to cut the desired shape and size. Be careful and use gloves to protect your hands.
Step #4
Place a sheet of sound damping to the surface without removing the protective film. If it covers the surface properly, you are ready to install it. Gradually remove the protective paper film as you apply it to the surface for better adhesion. Once on the surface, press it down firmly until it is set in place. Flatten it with your hands to avoid unnecessary air bubbles. Use a rolling tool like the NVX SDRLR1 to press the mat down to the metal surface. Go across the entire surface with the roller to ensure that the sheet is installed properly.
Step #5
Once all sound deadening is in place, simply reinstall all trim pieces and carpet back to its original placement. Now you are ready to enjoy higher sound quality with fewer vibrations.
Best selling similar products
Second Skin Audio SPEC-GUN-BOTTLE
• Spectrum Spray Gun and Bottle
• Used with Spectrum Spray on Deadener and other undercoats
• Refillable bottle, smooth and easy spraying
• Comes with (2) tubes: 3-1/4" long and 7-1/4" long
$39.99
List price $47.99
• Universal seam sealing tape
• Seals the seams of the Ballistic sheets
• 1-1/2" (38mm) x 30 feet roll
• Tape Material: Aluminum
• Color: Silver
(1)
$11.99
List price $13.99
• Sound Deadening Headliner Kit
• Compatible with select 1997-2006 Wrangler and Wrangler Unlimited
• Material Use: Sound Barrier
• Material Thickness: 1"
• Sheet Amount: 2 piece (pre-cut) with 6 filler strips
• Install Location: Headliner
(1)
$199.99
List price $297.52
• Sound Deadening Headliner Kit
• Compatible with select 2007-2010 Wrangler
• Material Use: Sound Barrier
• Material Thickness: 1"
• Sheet Amount: 3 piece (pre-cut) with 11 filler strips
• Install Location: Headliner
$189.99
List price $312.39
NVX SDBSK2 Premium Stealth Black
• 1.38 square feet sound deadening kit
• Solid black design for any stealth car audio installation
• Material Used: Vibration Dampener
• Material Thickness: 0.091
• Install Location: Speaker
• Pack includes two 10" x 10" sheets
(47)
$14.99
List price $18.74
• 20 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Trunk
• Pack includes five 18" x 32" sheets
(123)
$49.99
List price $71.99
NVX SDRLR1 Sound Dampening Rubber Roller
• Universal heavy duty roller for installing sound deadening mats
• Compatible with NVX, Dynamat, and other brands
• Thick plated steel frame
• 2" solid, soft urethane rubber roller
(126)
$10.99
List price $13.99
• 36 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Entire Vehicle
• Pack includes nine 18" x 32" sheets
(131)
$104.99
List price $119.99
• 1/2" DynaLiner High Performance Insulation Kit
• Used on Top of Dynamat
• Provide High Acoustic Absorption and Excellent Thermal Insulation
• Contains One 32" x 54" Sheet
• Ultra Lightweight & Flexible
(5)
$117.95
List price $141.19
• 20 square feet tri-layer sound deadening kit
• Made with butyl rubber, aluminum foil, and foam
• Material Used: Vibration Dampener
• Material Thickness: 1/8"
• Install Location: Entire Vehicle
• Pack includes five 18" x 32" sheets
(21)
$69.99
List price $83.99
Manufacturer:
Model Number:
SDVK4_2
Weight:
7.46lbs
Internal SKU:
sdvk4_2
Internal Product ID:
187541
| 5 star |
|
86% |
| 4 star |
|
12% |
| 3 star |
|
2% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Everybit as good as the more well known products
This came free with a bundled purchase,.. and I also purchased some Rattletrap Extreme as this wasn't enough for the car. I was expecting this to be mostly unusable due to the Name.
I was wrong.. it was every bit as good in thickness and adhesion as the more expensive brand I had bought. So if you can get this cheaper than other Sound material,.. go for it.
112 found this helpful
NVX SDVK4
Works great at a great price. I have it under my trunk lid and it keeps it from rattling too bad.
109 found this helpful
Good product, not the easiest
Used a few sqft of this material, along with the equivalent from Streetwires (PartsExpress) and a ton of Peal 'n Seal (Lowe's) for the rest.
I would say that Peal 'n Seal was the easiest to apply, but also the thinnest (an cheapest). So if you are doing some serious job you may want to double or triple the layers.
The NVX material was the thicker of the three I used, and once it's glued it stays soft which is very good. But beware, you will never get it off again. The only thing I would reproach is that the aluminum is quite thick, which makes it hard sometimes to comply with shapes. But it is good to fill in big gaps or openings and add some rigidity.
My preferred material is the Streetwire stuff, which is a bit cheaper. It was thick enough and compliant enough to make it really easy to install and it sticks like crazy while being forgivable if you make a mistake.
Have fun!!!
102 found this helpful
awesome
simply amazing before i installed it i could not hear a clean bass at all by trunk was rattling so much but now my trunk is solid and i'm enjoying the bass it's cheap and awesome NVX for the win
104 found this helpful
NVX better than the Rest
Great price, great quality. Plus delievery came fast. Will buy again for rear door.
107 found this helpful
NVX SDVK4
I USED THIS PRODUCT TO INSULATE THE SHEETMENT AT THE KICKPANELS AND THE FLOOR AREA BEHIND MY REAR SEAT IN MY1972 VW SUPER BEETLE. THIS PRODUCT WORKED OUT GREAT FOR ME, NO VIBRATION, REALLY QUIETED THE ROAD NOISE ALSO. OVERALL A GREAT PRODUCT.
101 found this helpful
Great product!
This is the first sound dampening material that I've used so far and I have to say that I am quite impressed with the product. I used it to reduce the vibrations generated from my sub at the back of my car. Since then, sound quality has improved considerably. For the price, I strongly recommend this product.
98 found this helpful
awesome
this is the best stuff for the best price now
102 found this helpful
works great
Less weight than other sound proofing I have used, cuts easy and with a hair dryer it will mold to any contour .
98 found this helpful
Perfect kit foe speaker installs or a single door.
This deadener works wonders for vibration and outside noise. It is thicker than Dynamat and will eliminate that horrible resonance caused by lower frequency notes transferred through sheet metal and rattles in plastic. It also improves sound quality and SPL.
94 found this helpful
Belva Five Piece Installer's Panel Removal Tool Kit
Assists in removing door panels, vehicle upholstery, and many other parts of the car.
(73)
$11.99
List price $18.99
NVX Black Handle Stainless Steel Utility Knife
A must have when installing sound damping material
(1)
$3.99
List price $9.99
NVX SDRLR1 Rubber Sound Dampening Roller
2-inch Professional Heavy Duty Roller for Sound Dampening
(126)
$10.99
List price $13.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
