The RE-Up Combo

General Features:

• ZTX Series Monoblock Class D Car Amplifier
• RMS Power Rating:
• 4 ohm: 600 watts x 1 chan.
• 2 ohm: 1000 watts x 1 chan.
• 1 ohm: 1400 watts x 1 chan.
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +12 dB bass boost at 45 Hz)
• Wired remote control bass knob included
• Soft start turn-on
• Mono channel operation
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink
• Input sensitivity:
• Level: 100mV-6V
• Variable low-pass filter (40-180 Hz, 24 dB/octave)
• Variable subsonic filter (17-50 Hz, 24 dB/octave)
• 1/0 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 9-1/2"W x 14-3/4"L x 2-7/16"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

General Features:

• ZTX Series 4-Channel Class AB Car Amplifier
• RMS Power Rating:
• 4 ohm: 85 watts x 4 chan.
• 2 ohm: 110 watts x 4 chan.
• Bridged, 4 ohm: 210 watts x 2 chan.
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +18 dB bass boost at 45 Hz)
• Soft start turn-on
• 4/3/2 or Mono channel operation
• Speaker-level (high-level) inputs with signal sensing for automatic turn-on
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink
• Input sensitivity:
• Level: 125mV-5V
• Variable high-pass filter (40-250 Hz, 12 dB/octave)
• Variable low-pass filter (40-250 Hz, 24 dB/octave)
• 8 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 9-1/2"W x 14-1/16"L x 2-7/16"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

General Features:

• 6-1/2" XXX Series 2-Way Car Component System
• Power Handling:
• Peak: 1200 watts total / 300 watts each side
• RMS: 600 watts total / 150 watts each side
• Foamed-Core Poly-Aluminum cone material
• Sanoprene speaker surround
• 1" Silk dome tweeter
• FEA optimized motor structure
• 2" single 4-layer high-temperature voice coils
• High linearity Nomex spider design
• Designed for extreme excursion for high bass output
• Screw set terminals for a solid connection
• 2 ohm impedance
• Die-cast Aluminum basket for reduced noise cancellation
• Powerful Neodymium magnet on both the bass driver and the tweeter
• Includes twisted pair speaker wire with a thick braided jacket
• 12 dB/Octave crossover network
• Tweeter attenuation control
• External Crossover Adjustments:
• Tweeter Attenuation: 0, -6, -9 dB
• Woofer Frequency: 2,800 Hz, 3,200Hz, and 3,600 Hz
• Top-mount depth: 3-1/4"
• Woofer mounting diameter: 5-7/8"
• Tweeter mounting diameter: 2-1/8"
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Subwoofer Features:

• 12" Dual 4 ohm SEX v2 Series Car Subwoofer
• Power Handling:
• RMS: 750 watts
• Impedance: Dual 4 ohm
• Dual composite 2-piece cone
• Rubatek foam surround
• FEA Optimized motor structure
• Progressive spiders
• Wrap around rubber gasket
• Tork-Tite terminals
• 3" 4-Layer voice coil
• Double stacked magnets
• Cast aluminum basket
• One-way, Linear Excursion (Xmax): 20 mm
• Efficiency (SPL): 86.9 dB
• Mounting Depth: 6-1/2"
• Also available in a Dual 2 ohm: RE Audio SEXv2-12D2
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Amplifier Kit Features:

• 1/0 Gauge Dual Amplifier Installation Wiring Kit for 1 or 2 amplifiers
• Designed specifically for car audio systems over 1000 watts
• Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
• Brass and satin chrome ANL/Mini-ANL fuse holder offers ideal protection for high powered systems
• Two brass and satin chrome distribution blocks
• Strand Count: 4704
• BC-5W2 Compliant
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 20 ft. (6.1 meters) Frosted Blue 1/0 gauge main power wire with seamless crimp ring terminal
2. 3 ft. (.91 meters) Frosted Gray 1/0 gauge main ground wire with seamless crimp ring terminal
3. 5 ft. (1.52 meters) Frosted Blue 4 gauge secondary power wire
4. 5 ft. (1.52 meters) Frosted Gray 4 gauge secondary ground wire
5. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
6. One NVX XMANL04 ANL/Mini-ANL fuse holder with 300 amp ANL fuse
7. Two NVX XDBU4 with 1/0 gauge input, four 4/8 gauge outputs distribution blocks
8. One 3/4" black firewall grommet
9. Two black 4 gauge nickel-plated spade terminals
10. Two blue 4 gauge nickel-plated spade terminals
11. One black 18 gauge spade terminal
12. One 18 gauge red butt connector
13. Ten 6" black zip ties

Product Features:

• 6 Meter (19.69 ft), 4-Channel X-Series signal cables
• Dual twisted-pair conductors to eliminate inducted noise and interference
• Hyper-flex technology for flexibility
• Short, proprietary-machined metal ends
• Nickel-plated k-cut collars, dual split center pin, and black protective mesh
• Tactile grip RCA ends
• Color-coded strain relief identifies front-rear/light-right channels
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Product Features:

• X-Series Twisted RCA
• 2-Channel Interconnect Cable
• Frost blue jacket
• Dual injection nickel-plated split RCA ends
• Dual Twisted Pair Hyper-Flex technology for better signal transfer
• Black nylon braid to prevent chaffing and electromagnetic interference
• Tactile grip RCA ends
• Color-coded strain relief identifies left and right channels
• Length: 7m (22.97 ft)
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty