Universal Sub Boxes (Loaded/Powered) for 1987 Porsche 944

---

• Sealed truck enclosure with 1 12" Prime R2 Series Subwoofer
• 250 watts RMS (500 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 27.375" L x 13.5" H x 3.25" W x 5.25" W2

• 10" Amplified Loaded Subwoofer System
• 500 watts Peak
• Built-In Class D amplifier
• Variable Bass Boost
• Wired remote bass level controller

• 8" Amplified Loaded Subwoofer System
• 2400 watts RMS
• Includes four DS18 EXL-X8.2D subwoofers
• Includes DS18 FRP-2.5K/TI amplifier
• Variable bass boost
• 3/4" MDF construction with sprayliner finish
• Under rear seat enclosure design

• 8" Amplified Loaded Subwoofer System
• 250 watts Peak
• Built-in Class D Monoblock Amplifier
• Speaker-Level Inputs
• RCBM-250D remote control sold separately

• 12" GT Series Subwoofer
• GT Series Mono block Car Amplifier
• 450W Peak
• 150W RMS
• 12" Single Ported Subwoofer Enclosure
• Variable low-pass filter (40-200 Hz, 24 dB/Octave)
•

• 500 Watts RMS
• Sensitivity: 87.15 dB
• 2 Ohm Final Impedance
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• JL Audio's patented, chamber-coupled port design
• Gray carpet wrap
• fine-tuned through extensive real-world listening

• Ported enclosure with 2 8" MicroSub Series Subwoofer
• 500 watts RMS
• Final Impedance: 2-ohm
• Dimensions: 35.5" L x 11" H x 5.125" W

• Sealed slim enclosure with 1 11" VS Series Subwoofer
• 300 watts RMS (600 watts Peak)
• Final Impedance: 4-ohm

• Sealed enclosure with 1 10" Mille Pro Series Subwoofer
• 500 watts RMS (1000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 20.9" L x 6.30" H x 14.21" W

• Enclosure with 2 10" TB Series Subwoofer
• Loaded with active CompR woofer and passive Reflex sub
• 400 watts RMS (800 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 10-5/8" L x 17-1/16 H1 x 10-3/4 H2 x 16-9/16" W2

• 8" Amplified Loaded Subwoofer System
• 135 watts RMS
• Built-In Class A/B amplifier
• Variable bass control
• Speaker-level inputs
• Wired remote bass level control

• Ported enclosure with 1 12" CompR Series Subwoofer
• 500 watts RMS (1000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 18-3/8" L x 16" H x 11-1/4" W x 14-7/16" W2

• Sealed truck enclosure with 1 10" TW3 Shallow Mount Series Subwoofer
• 400 watts RMS
• Final Impedance: 2-ohm
• Dimensions: 19" L x 12.375" H x 4.35" W x 6.25" W2

• Sealed truck enclosure with 1 12" Punch P3 Shallow Mount Series Subwoofer
• 400 watts RMS (800 watts Peak)
• Final Impedance: 1-ohm
• Dimensions: 27.4" L x 13.5" H x 5.3" W x 3.3" W2

• Sealed truck enclosure with 1 10" Comp Series Subwoofer
• 150 watts RMS (300 watts Peak)
• Final Impedance: 4-ohm
• Dimensions: 4-3/4" L x 15" H x 21-3/4" W x 7-11/16" W2

• Built-in DCD Class D amplifier
• Automatic turn-on capable
• CNC-Cut High-Grade MDF
• Steel mesh grille mounted with driver
• Wrapped with Automotive-grade vehicle carpet
• Enclosure Dimensions: 6.625" D x 21.00" W x 13.50" H

• Sealed truck enclosure with 1 12" CompRT Series Subwoofer
• 500 watts RMS (1000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 27" L x 13-1/2" H x 3-1/2" W x 7" W2

• Two 10" Punch Series Stage 1 Subwoofers
• Kevlar Reinforced Paper Cone
• Tear and Fatigue Resistant
• Proprietary Spider Venting/Cooling Technique
• Solid 5/8" MDF Construction

• 8" Amplified Loaded Subwoofer System
• 250 watts RMS
• Built-In Class D Amplifier
• Speaker-Level Inputs

• Peak Power: 450 watts
• RMS Power: 200 watts
• Impedance: 4 ohm
• Wired remote subwoofer control included
• Bult-in passive radiator