Universal Subwoofers for 1992 GMC Typhoon

---

• Peak Power: 1000W
• RMS Power: 150W
• Sensitivity: 85.5 dB
• Parabolic Polypropylene Cone
• Unique Foam Blend High Roll Surround
• Bumped Back Plate For Maximum Excursion
• Vented Pole Piece for Extended Play Time

• Sensitivity: 80.49 dB
• Mounting depth: 4.25 "
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor

• Peak Power: 2,000W
• RMS Power: 1,000W
• Injection-molded, patented square polypropylene cone
• Ribbed santoprene surround with blue stitching

• RMS Power: 1500 watts
• Impedance: Dual 1.5 ohm
• Polypropylene Cone
• Polyester Foam Surround
• Mount depth: 10.50"
• Sensitivity: 86.3 dB

• RMS Power: 1200 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

• 10" VS-Series Subwoofer
• Dual 4-ohm Voice Coil
• RMS Range: 350 - 500 Watts
• Non-Pressed Paper With Woven Carbon Fiber Top
• High Excursion Foam Surround
• Stamped Steel Basket
• Single Nomex Spider

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 2 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 3-7/16"
• Sensitivity: 84.8 dB

• 2000W Peak
• 1000W RMS
• Dual 4 Ohm
• Kevlar Fiber Reinforced Paper Cone
• VAST Santoprene Rubber Surround
• Anodized Aluminum Voice Coil
• Inductive Damping Heat Sink
• SWIFT Terminals

• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.63"
• Sensitivity: 83.24 dB

• Peak Power: 800 watts
• RMS Power: 200-400 watts
• Impedance: Dual 2 ohm
• Injection Molded Polypropylene cone
• Santoprene Rubber surround
• Mount depth: 5-1/4"
• Sensitivity: 84.6 dB

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.6 dB

• 2 Subs
• 1200W Peak
• 600W RMS
• Mineral-Filled, Polypropylene Cone Woofer
• DMA Optimized Motor System
• Elevated Frame Cooling
• Lead Wire Woven Into Spider

• Pair of NVX NSW102V2 350W 10" N Series Subwoofer
• RMS Power: 200-350W
• Ultra-Light Non Pressed Paper Cone
• Custom Blended Foam Surround

• Peak Power: 800 watts
• RMS Power: 200-400 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 5-1/4"
• Sensitivity: 84.6 dB

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.7 dB

• Peak Power: 500W
• RMS Power: 250W
• 10" Dual 2 ohm Prime Series Stage 2 Subwoofer
• Mica-Injected Polypropylene Cone
• StampCast Basket
• Anodized Aluminum Voice Coil Former
• Frequency Response: 45-250 Hz

• Peak Power: 750 watts
• RMS Power: 375 watts
• Impedance: Dual 2 ohm
• Injection Molded Polypropylene Cone
• ISD (Inverted Structural Dome)
• Santoprene Rubber Surround
• Mount depth: 5-1/2"
• Sensitivity: 83.6 dB

• Peak Power: 750 watts
• RMS Power: 375 watts
• Impedance: Dual 4 ohm
• Injection Molded Polypropylene Cone
• ISD (Inverted Structural Dome)
• Santoprene Rubber Surround
• Mount depth: 5-1/2"
• Sensitivity: 83.6 dB

• Peak Power: 750 watts
• RMS Power: 180 - 375 watts
• Impedance: Single 4 ohm
• Injection Molded Polypropylene Cone
• Rubber Surround
• Mount depth: 4-1/4"
• Sensitivity: 87.2 dB

• Peak Power: 1,500W
• RMS Power: 750W
• Injection-molded, patented square polypropylene cone
• Ribbed santoprene surround with blue stitching