Universal-Fit Audio for 1993 Mitsubishi Eclipse

---

• Peak Power: 1400 watts
• RMS Power: 700 watts
• Impedance: Dual 2 ohm
• Composite Fiber Cone
• Mount depth: 7.5"
• Sensitivity: 83.2 dB

• 160 watts x 4 channel @ 4 ohm
• 250 watts x 2 channel @ 2 ohm
• Total RMS Power: 250 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 800 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 2200 watts
• RMS Power: 1100 watts
• Impedance: Dual 4 ohm
• Composite Fiber Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 14.2"
• Sensitivity: 88 dB

• Peak Power: 400 watts
• Built-in D amplifier
• Weatherproof Rating
• (8) 4" Full-range speakers
• (2) 1" Dome Neodymium Tweeters
• Built-in RGB LED illumination
• AUX input for smartphones and MP3
• Dimensions: 3.87" W x 3.8" H x D

• 200 watts x 2 channel @ 2 ohm
• 300 watts x 2 channel @ 1 ohm
• Bridged: 600 watts x 1 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• 140 watts x 4 channel @ 4 ohm
• 170 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 4-Channel-Channel Amplifier

• 10" Subwoofer Steel Mesh Grille for DES Series Subwoofers
• Made from high-quality black steel mesh
• Fits between the surround and plastic concealing ring
• No screws, clamps or extra hardware needed

• Active 4-channel line output converter
• Speaker level and low-level inputs
• Selectable Load Modes: 20-ohms, 60-ohms, and 20000-ohms
• Turn-on Modes: Remote, Vox (Audio Signals), and DC
• Ground Isolation Switch: 200-ohms, ISO, and Ground

• Peak Power: 500 watts
• RMS Power: 250 watts
• Paper Cone
• Impedance: Dual 2 ohm
• Sensitivity: 85.2 dB

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Semi-Pressed Paper Cone
• Mount depth: 7.4"
• Sensitivity: 85.5 dB

• 160 watts x 4 channel @ 4 ohm
• 250 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 1/0 gauge Complete Amplifier Installation Kit
• Made from OFC (100% Oxygen-Free Copper)
• 2 Channel RCA interconnect cables included for the audio signal connection from the receiver to the amplifier
• Noise shield directional construction with 3 tightly twisted conductor bundles

• 8" Amplified Loaded Subwoofer System
• 250 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Wired Remote Bass Level Control
• Speaker-level (high-level) input via RCA

• 200 watts x 2 channel @ 4 ohm
• 350 watts x 2 channel @ 2 ohm
• Bridged: 700 watts x 1 channel @ 4 ohm
• Total RMS Power: 700 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• 90 watts x 4 channel + 250 watts x 2 channel @ 4 ohm
• 150 watts x 4 channel + 150 watts x 2 channel @ 2 ohm
• Bridged: 300 watts x 2 channel + 500 watts x 1 channel @ 4 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• 120 watts x 4 channel @ 4 ohm
• 185 watts x 4 channel @ 2 ohm
• Bridged: 370 watts x 2 channel @ 4 ohm
• Total RMS Power: 740 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 340 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 11" Amplified Loaded Spare Tire Subwoofer
• 150 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs

• 500 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier