Universal-Fit Audio for 2002 Ford Excursion

---

• High-polished stainless steel tower speaker swivel clamps
• Designed to fit tube diameters of 1-7/8" up to 3"
• Fits REV8, REV10, and ICON8 tower speakers
• Includes mounting bolts

• 4 band-Band Parametric Marine Equalizer
• 3-zone controller with 2 separate equalizers for tower and cabin zones
• Main input, Auxiliary input, or Bluetooth input
• Master, in-boat and tower zones, and subwoofer volumes
• Includes a talkback microphone for PA communications

• 12" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Includes hardware to connect multiple ZERO 12 ENC boxes

• 8-Channel line driver with remote controller
• 4 pairs of adjustable outputs
• Remote level adjustments of Ch 5/6 and Ch 7/8
• Dual color LEDs for signal level monitoring and setup
• Sealed construction designed for marine applications

• Mounting clamp for Stealth soundbars with 1.75" round tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• Slider mounting bracket for Stealth HD and XT soundbars
• CNC'd from billet aluminum for extra durability
• Allows adjusting of soundbar mounting width
• Includes brackets, bolts, lock-washers, and flat-washers (2 each)

• 23 ft. extension cable for WS-MC-20 wired transom remotes
• Extends reach between source unit and wired remote
• Designed for use with MC-20 marine source unit
• Works with WS-G2-CTR and WS-G2-TR transom remotes
• Features marine grade construction materials

• Mounting clamp for Stealth soundbars with 1.5" round tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• Y-cable for WS-MC-20s wired transom remotes
• Allows connection of up to 2 transom remotes to the source unit
• Designed for use with WS-MC-20 marine source unit
• Works with WS-G2-CTR and WS-G2-TR transom remotes
• Features marine grade construction materials

• Upper mount speaker brackets for Nautique FCT-5 or Correct Craft towers
• Works with REV8X, REV8SC, REV10X, and REV10BSC
• Equipped with large wiring openings to accept wiring for LED tower lighting
• Includes (2) brackets and mounting screws

• 10" White closed style grille for REV 10 marine tower speakers
• Ideal for marine or outdoor applications
• Easy to install and replace, no drilling required
• Includes (2) speaker grilles and (8) 12mm hex-head screws

• 8" Marine Subwoofer Grille
• White SW grille design
• REVO 8 FA marine subwoofers sold separately

• Talk-back microphone with adjustable microphone gain
• Made for use in the outdoors, marine, and powersports use
• Equipped with RCA input and line out connections
• Can be used with Wet Sounds microphones
• Mounting hardware accessories included

• Marine Black Box LED Lighting Controller
• 4 Independent marine lighting zones
• Powers up to 500 watts of LED lights
• Wet Sounds WS-MC-1 marine media receiver required, sold separately
• Operating Voltage: 10-30 volts DC

• RGB RF Music Controller with Touch Activated Remote
• 6 multi-color modes and 5 music-lighting control modes
• Touch sensitive color wheel for color selection
• Working Voltage: 12-24V DC
• Receiver Range: 20-30 meters

• 10" LED acrylic ring and LED strip for Wet Sounds marine speakers
• CNC-machined high-quality acrylic rings
• SMD 5050 RGB LED strips
• Compatible with Wet Sounds REV10 and REV410 marine tower speakers (Sold separately)

• In-dash marine equalizer mounting bracket
• Fits Wet Sounds WS 420 SQ equalizers (Sold Separately)
• Made with CNC billet aluminum material
• Mounting hardware included

• 8" Marine Subwoofer Grille
• Black SW grille design
• REVO 8 FA marine subwoofers sold separately

• 8" Marine Subwoofer Grille
• Black XW grille design
• REVO 8 FA marine subwoofers sold separately

• 8" Marine Subwoofer Grille
• White XW grille design
• REVO 8 FA marine subwoofers sold separately

• Subwoofer grille RGB LED light kit
• Fits Wet Sounds' REVO 12" marine subwoofers
• Includes LED strip and quick disconnect harness
• Ideal for marine or outdoor applications

• Smooth powder-coated silver finish tower speaker fixed clamps
• Designed to fit tube diameters of 1-7/8" up to 3"
• Fits REV8, REV10, and ICON8 tower speakers
• Includes mounting bolts

• Equalizer under dash mounting bracket
• Fits WS420-BT or WS220-BT equalizers (sold separately)
• Made with tough black billet brushed metal finish
• Mounting hardware and screws included

• 6-Pin 6-pin RGB LED connector
• Designed for REV and ICON swivel clamp tower speakers (Sold separately)
• Includes a pair of TC3 swivel clamps
• Sold as Pair

• 18-gauge 3-conductor Marine Primary Wire
• 100% Oxygen-Free Copper material
• Color: Blue
• Ultra-fine strand and soft outer jacket

• In-dash marine equalizer mounting bracket
• Fits Wet Sounds WS 420 SQ equalizers (Sold Separately)
• Made with CNC billet aluminum material
• Mounting hardware included

• Mini transom remote for MC-1, MC-2, or MC-5 source units
• Controls power, source, volume, track selection, play/pause
• Back-lit buttons for easier visibility and operation
• 25 ft. 3.5 mm AUX cable included

• 12" XS-style stainless steel grilles for REV 12 HD tower speakers
• Made with rugged plastic and stainless steel inlay
• Includes (2) speaker grilles and (8) allen head screws

• Top mount adapters brackets for MasterCraft towers
• Works with ICON8X, REV8X, REV10X
• Also works with ICON8XM, REV8SXM, and REV10SXM via removable flat base mounts
• Includes (2) disc adapters and mounting screws

• Wet Sounds WS-420 BT 4-Band Parametric Marine Equalizer
• Built-In Bluetooth
• Microphone Turns Your System into a PA
• Compatible with Android and iPhone
• WS-EQ UDM - S Aluminum In Dash EQ Mounting Bracket

• 12" XZ-style grilles for REV 12 HD tower speakers
• Made with rugged plastic, able to withstand harsh conditions
• Includes (2) speaker grilles and (8) allen head screws

• Mounting clamp for Stealth soundbars with 0.75" square tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• Subwoofer grille RGB LED light kit
• Fits Wet Sounds' REVO 10" marine subwoofers
• Includes LED strip and quick disconnect harness
• Ideal for marine or outdoor applications

• Wired transom remote with full color display
• Complete duplicate control of WS-MC-20
• Full color 3" TFT display with back-lit buttons
• 23 ft. extension cable included

• High-polished stainless steel tower speaker fixed clamps
• Designed to fit tube diameters of 1-7/8" up to 3"
• Fits REV8, REV10, and ICON8 tower speakers
• Includes mounting bolts

• 10" Single Sealed Truck Subwoofer Enclosure
• Medium Density Fiberboard (MDF) construction
• Compatible with ZERO 10 subwoofers (Sold separately)

• Subwoofer grille RGB LED light kit
• Fits Wet Sounds' REVO 8" marine subwoofers
• Includes LED strip and quick disconnect harness
• Ideal for marine or outdoor applications

• Mounting clamp for Stealth soundbars with 1.25" square tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• 10" Amplified Loaded Subwoofer System
• 500 watts Peak
• Built-In Class D amplifier
• Variable Bass Boost
• Wired remote bass level controller

• Peak Power: 300 watts
• Built-in D amplifier
• Weatherproof IPX-7 rating enclosure
• (12) 3" Full-range speakers
• (4) 1" tweeters
• USB playback and charging
• AUX input for smartphones and MP3
• Dimensions: 33.74" W x 3.85" H x 4.04" D