Universal-Fit Audio for 2004 Subaru Outback

---

• Ported enclosure with 2 12" Solo-Baric L7S Series Subwoofer
• 1500 watts RMS (3000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 16" H x 16-1/4" W x 19-1/2" W2

• Ported enclosure with 2 12" CompR Series Subwoofer
• 1000 watts RMS (2000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 32-3/8" L x 16" H x 14" W x 17-1/4" W2

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• Ported enclosure with 1 12" Solo-Baric L7S Series Subwoofer
• 750 watts RMS (1500 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 18-3/4" L x 16" H x 14-3/4" W x 17-7/8" W2

• Ported truck enclosure with 1 10" Solo-Baric L7S Series Subwoofer
• 600 watts RMS (1200 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 21-1/2" L x 15" H x 10" W x 6-1/2" W2

• Controls 1-2 mono-channel amps with a 3.5mm level controller input
• Compatible with PTRTP and Hideaway powered sub enclosures
• Compatible with WXA, KEY, CXA, PXA and KPX-series amps
• Flush or surface-mountable
• Heavy-duty aluminum design with laser etching
• Single knob with high-end, metal look

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 2 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• 6-Position High-Power Battery Terminal
• Positive and negative polarity
• 5/16" stud connectors to accept most ring terminals
• Nickel-plated brass connection posts

• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter

• 150 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class 1 ohm Stable Monoblock Amplifier

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• Peak Power: 900 watts
• RMS Power: 450 watts
• Impedance: Dual 2 ohm
• Injection Molded Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 4-3/4"
• Sensitivity: 82.37 dB

• 12" SoloX Series Dual 1-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 1-ohm
• Alignment shims are included for installation

• 45 watts x 4 channel @ 4 ohm
• 75 watts x 4 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm
• Total Peak Power: 350 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 15" square subwoofer mesh grille
• Fits for 15" Solo-Baric L7S subwoofers
• Protects against damage
• Black mesh design

• 150 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• 500 watts x 1 channel @ 1 ohm
• Total RMS Power: 500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 8 gauge Power Cable
• OFC (100% Oxygen-Free Copper) material
• Full-spec hyper-flex cable design
• Plated in anti-corrosive 99.9% tin
• Length: 20 feet (6 meter)

• 1400 watts x 1 channel @ 4 ohm
• 2500 watts x 1 channel @ 2 ohm
• 3600 watts x 1 channel @ 1 ohm
• Total Peak Power: 5000 watts
• Class D 1 ohm Stable Monoblock Amplifier