Universal-Fit Audio for 2007 Mazda MX-5 Miata

---

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• 10 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 11" Amplified Loaded Subwoofer System
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 12-volt Lithium Racing Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Ideal use for stock or aftermarket alternators
• Includes XS Power Li1208 IntelliCharger

• Premium 1080p HD Night Vision Dash Camera Bundle
• Includes 1 front and 1 rear camera
• Records in full 1080p HD at 30 FPS with a140-degree field of view
• Continuous recording, incident recording, incident continuous recording for BCWS
• Manual recording and parking mode recording modes
• Front collision, lane departure and front car movement warning alerts
• Built-in WiFi and GPS
• Compatible with select Alpine receivers

• Controls 1-2 mono-channel amps with a 3.5mm level controller input
• Compatible with PTRTP and Hideaway powered sub enclosures
• Compatible with WXA, KEY, CXA, PXA and KPX-series amps
• Flush or surface-mountable
• Heavy-duty aluminum design with laser etching
• Single knob with high-end, metal look

• JL Audio Tower Speaker Swivel Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers
• 334 Degrees of Total Swivel Capability

• Split Loom Tubing
• Diameter: 1/8"
• Length: 100 Ft
• Material Type: Polyethylene
• Exterior Finish: Smooth
• Color: Black

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 4-ohm
• CA glue adhesive is NOT included

• 5/8" MDF (Medium Density Fiberboard)
• Perfect for tight spaces (trucks/hatchbacks)
• fits most 10" subwoofers
• fully carpeted
• fully caulked and sealed tight

• Upgrade Your Factory Power and Ground Wire
• Perfect for Dealing with Dimming Lights
• Improve the Efficiency of Your Vehicle's Electrical System
• Use for Systems 250A or Less
• Includes All Necessary Wiring
• Ring Terminals are Pre-Connected to Power and Ground Wire

• Roof Mount Amplified Antenna
• Shark fin design for sleek installation
• Color: Black

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 3.25 cubic feet
• Premium Black Carpet with Black NVX Logo

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.0 dB

• 2-Way 5-Button Replacement LCD Remote
• Up to 3000 feet of range (0.56 miles)
• Replacement remote for SP-302

Universal Antenna Extender • Extends Antenna 18" (1.5 ft.)

• 4 Gauge 6000 Series Complete Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1750 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)