Universal-Fit Audio for 2011 Lexus IS250

---

• 1" Cento Series Soft Dome Tweeters for OE Placements
• Built-in crossover: 6dB/octave
• 120 watts Peak Each
• 4 ohm Impedance

• 1" Dieci Series Tweeters
• 80 watts Peak Each
• 40 watts RMS Each
• 4 ohm Impedance

• 1-3/16" Mille Pro Series Tweeters
• 120 watts Peak Each
• 60 watts RMS Each
• 4 ohm Impedance

• 1" Cento Series Soft Dome Tweeters
• 120 watts Peak Each
• 60 watts RMS Each
• 4 ohm Impedance

• 1" Cento Series Soft Dome Tweeters for OE Placements
• Built-in crossover: 6dB/octave
• 120 watts Peak Each
• 4 ohm Impedance

• Specifically developed for Hertz MP 70.3 and Hertz MP25.3
• Two-position (0 / +2 dB) switch for tweeter level adjustments
• Pure copper wire low series resistance inductors

• 8-Channel Digital Sound Processor
• 7-Band parametric equalizer
• Speaker level (high-level) inputs
• Bluetooth for for added control
• High-resolution audio
• Configurable via S8 DSP application/software

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 1.8" NEO Series Pro-Audio Bullet Tweeters
• 100 watts Peak Each
• RMS Each
• 4 ohm Impedance

• Bi-amplification available
• Three-position switch for tweeter level adjustments
• Hi-Boost control
• Extremely high quality bi-metallized polyester film capacitors
• Air wound inductors built on pure copper-wire
• High power rating Wirewound resistors
• Dimensions: 7.67" x 4.68" x 1.61"

• Peak Power: 300 watts
• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Polypropylene cone
• Rubber surround
• Mount depth: 3.98"
• Sensitivity: 84 dB

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Polypropylene Cone material
• Rubber Surround material
• Mount depth: 3.25"
• Sensitivity: 82.5 dB

• 4 Channel: 160 watts x 4 channel @ 4 ohm
• 4 Channel: 250 watts x 4 channel @ 2 ohm
• 3 Channel: 160 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 4 ohm
• 3 Channel: 250 watts x 2 channel @ 2 ohm + 500 watts x 1 channel @ 4 ohm
• 2 Channel: 500 watts x 2 channel @ 4-ohm
• Total RMS Power: 1000 watts
• CEA-2006 Compliant
• Class D 2 ohm Stable 4-Channel-Channel Amplifier

• 90 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Polypropylene Cone material
• Rubber Surround material
• Mount depth: 3.46"
• Sensitivity: 84.5 dB

• 10" Amplified Loaded Subwoofer System
• 250 watts RMS
• Built-In Class D Amplifier
• High-level audio input on multi-pin connector
• Wired Remote Bass Level Control
• 2S² (2 Sides / 2 Sounds) design

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Polypropylene Cone material
• Rubber Surround material
• Mount depth: 3.46"
• Sensitivity: 85 dB

• Sealed enclosure with 1 10" Mille Pro Series Subwoofer
• 500 watts RMS (1000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 20.9" L x 6.30" H x 14.21" W

• Peak Power: 700 watts
• RMS Power: 350 watts
• Impedance: Single 2 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 5.12"
• Sensitivity: 86.5 dB

• 55 watts x 2 channel @ 4 ohm
• 85 watts x 2 channel @ 2 ohm
• Bridged: 170 watts x 1 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class A/B 2 ohm Stable 2-Channel-Channel Amplifier