Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Discontinued Car Audio & Electronics
  3. Discontinued Car Amplifiers
  4. Discontinued All Car Amplifiers

Discontinued All Car Amplifiers

Filters
Subwoofers ✕
Clear Filters
Reset Done
Brands
JL Audio (2)
Kicker (1)

We are sorry, no available results!

Product Type
Subwoofers,
Price Range
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Top-Mount Depth (Mounting Depth)
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Kicker CompVT 10" 4 Ohm (43CVT104) Open Box Complete

800W Peak (400W RMS) 10" CompVT Series Dual 4-Ohm Car Subwoofer

43CVT104 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker CompVT 10" 4 Ohm (43CVT104) Open Box Complete

800W Peak (400W RMS) 10" CompVT Series Dual 4-Ohm Car Subwoofer

• 400 Watts RMS
• 800 Watts Max
• UniPlate™ system redirects heat away from motor structure
• Perimeter Venting
• Stamped Steel Basket

• 400 Watts RMS
• 800 Watts Max
• UniPlate™ system redirects heat away from motor structure
• Perimeter Venting
• Stamped Steel Basket

JL Audio M12IB6-SG-TB (Open Box Complete)

12" 4-Ohm M-Series Marine Subwoofer with Titanium Sport Grill

M12IB6-SG-TB-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JL Audio M12IB6-SG-TB (Open Box Complete)

12" 4-Ohm M-Series Marine Subwoofer with Titanium Sport Grill

• 600W RMS
• Injection-Molded mica-filled polypropylene cone bodies
• Synthetic rubber surround specifically formulated with UV inhibitors
• Marine grade progressive roll synthetic fiber spider
• Gold-Plated marine-grade brass connection terminals
• Long linear excursion for enhanced output and reduced distortion

• 600W RMS
• Injection-Molded mica-filled polypropylene cone bodies
• Synthetic rubber surround specifically formulated with UV inhibitors
• Marine grade progressive roll synthetic fiber spider
• Gold-Plated marine-grade brass connection terminals
• Long linear excursion for enhanced output and reduced distortion

JL Audio MX10IB3-SG-CLD-B (Open Box Complete)

10-inch (250 mm) 4 ohm Marine Subwoofer Driver

MX10IB3-SG-CLD-B-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JL Audio MX10IB3-SG-CLD-B (Open Box Complete)

10-inch (250 mm) 4 ohm Marine Subwoofer Driver

• 175W RMS
• Injection-Molded mica-filled polypropylene cone bodies
• Synthetic rubber surround specifically formulated with UV inhibitors
• Marine grade progressive roll synthetic fiber spider
• Gold-Plated marine-grade brass connection terminals
• Long linear excursion for enhanced output and reduced distortion

• 175W RMS
• Injection-Molded mica-filled polypropylene cone bodies
• Synthetic rubber surround specifically formulated with UV inhibitors
• Marine grade progressive roll synthetic fiber spider
• Gold-Plated marine-grade brass connection terminals
• Long linear excursion for enhanced output and reduced distortion

 
    Clear all

    FAQ Frequently asked questions in Discontinued All Car Amplifiers

    A car amplifier is an electronic device designed to increase the power of audio signals sent to speakers. It plays a crucial role in enhancing the sound quality of your car audio system by providing additional power to drive the speakers effectively. When you add a car amplifier to your audio setup, you'll experience clearer sound, improved bass response, and overall better audio performance. Whether you're a music enthusiast or simply want to enjoy high-quality audio during your commute, a car amplifier is essential to achieving the best sound experience in your vehicle.
    Selecting the right car amplifier requires considering several factors. Firstly, determine the power requirements of your speakers and subwoofers to match them with an amplifier that provides adequate wattage. Consider the number of channels you need based on your speaker configuration (e.g., 2-channel for front speakers and a separate subwoofer channel). Pay attention to the amplifier's size and compatibility with your vehicle's space limitations. Also, look for features like high-level inputs, built-in crossovers, and adjustable gain controls for fine-tuning your audio output. Consulting with an expert or using online tools, like Sonic Electronix's AmpliFinder, can help you find the perfect match for your car audio needs.
    The ability to install a car amplifier yourself depends on your level of technical expertise and experience with car audio systems. While some enthusiasts with prior knowledge may successfully complete the installation, it's often recommended to seek professional installation for the best results. Professional installers have the expertise to ensure proper wiring, grounding, and secure mounting to prevent any potential damage to your vehicle. They can also optimize the amplifier settings to achieve the best sound quality and prevent any interference or noise issues. Professional installation ensures a safe and reliable setup, providing peace of mind and preserving your car's warranty.
    Yes, most multi-channel car amplifiers can be bridged to combine two channels into one, effectively doubling the power output to a single speaker or subwoofer. Bridging is beneficial in situations where you want to power a high-powered subwoofer with increased wattage. By bridging channels, you can achieve a mono output that drives the subwoofer with more power, resulting in stronger and deeper bass response. However, when bridging, it's crucial to follow the amplifier's guidelines and use the correct impedance load to avoid damaging the amplifier or speakers.
    In general, a car amplifier is not a significant drain on your car's battery when the vehicle is running. However, if you leave the amplifier powered on while the engine is off, it can slowly draw power from the battery, which may eventually lead to a dead battery if left unattended for an extended period. To prevent this, ensure that the amplifier is wired properly to a switched power source that turns off when the car is not in use. Additionally, using a high-quality car battery and monitoring its health regularly will help maintain optimum power delivery and prevent any issues related to battery drainage.

    All About Discontinued All Car Amplifiers

    Finding The Right Amplifier For Your Car

    This category contains all of our car amps and you can use our guided browsing tools to find the exact wattage, number of channels or other features you care about.

    Mini amplifiers, marine amplifiers, amplifier packages & bundles, plus other audio accessories like amplifier installation equipment, equalizers, and processors are all available from Sonic Electronix to complete your vehicle's audio system. Browse high-quality amplifiers from industry leaders including NVX, JL Audio, Rockford Fosgate, Kicker, Alpine, Belva and more.

    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2004 Saab 9-3

    2005 Toyota Corolla

    2001 Dodge Durango

    2008 Audi RS4

    2008 Mercury Mariner

    2020 Volvo S60

    2005 Audi A4

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2004 9-3
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo