Discontinued 2-Channel Amplifiers

• RMS: 325W x 2 @ 4 ohm, 650W x 2 @ 2 ohm, 1300W x 1 @ 4 ohm Bridged
• Pulse Width Modulated MOSFET power supply
•Nickel plated brass connections
• Built-in Variable Low-Pass and Subsonic Filter
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation

2 Channel MOSFET Bridgeable Power Amplifier • 500W x 2 @ 2 ohm peak power • 1000W x 1 @ 4 ohm bridged • remote sub level control • bass boost switch • power and protection LEDs

• 190W x 2-Chan. @ 4 Ohm
• 290W x 2-Chan. @ 2 Ohm
• MOSFET Power Supply
• Variable Bass Boost
• Brushed Aluminum Finish
• Platinum 4 AWG Power Block
• Remote Gain Control Included

200W 2 channel Amplifier • 100W x 2 channel power output at 2 Ohm • 50W x 2 channel power output at 4 Ohm • 2-way Highpass/Lowpass Xover • Intelli Bass

1250W Max, FX Series 2-Channel • 4 ohm: 220 watts x 2 chan. • 2 ohm: 280 watts x 2 chan. • Bridged, @ 4 ohm: 360 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

• RMS: 200W x 2 Chan. @ 4 ohm
• 1000W Max
• MOSFET PWM Power supply
• Wired remote bass level control
• Heavy-duty heatsink
• Low- and high-pass crossover

• 800 Watts Max
• 400 Watts x 2 Chan. @ 2 Ohm
• 4-Way System Protection
• Selectable Highpass/Lowpass Filters

300 watts peak power • black chrome design • neon blue lighting • hi/full/low-pass crossovers

• 100W x 2 Chan. @ 4 ohm
• 250W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• 2 Ohm Stable Stereo Operation with Power Output Increase

2000W Bridgeable 2-Channel Amplifier

• RMS Power: 75W x 2 @ 4 ohm, 100W x 2 @ 2 ohm
• Total Peak Power: 300W
• Built-In Low and High Pass Filters
• Dimensions: 7-3/4" W x 8-1/8" L x 1-15/16" H

• RMS Power: 175W x 2 @ 4 ohm, 350W x 2 @ 2 ohm
• Total Peak Power: 700W
• Variable Bass Boost
• Speaker Level Inputs
• 9.05"W x 9.21"L x 2.29"H

• 230W x 2 Chan. @ 4 ohm
• 1200W Max
• MOSFET PWM Power supply
• Wired remote bass level control
• Heavy-duty heatsink
• Low- and high-pass crossover

• 2250W Max
• 750W RMS
• Parabolic pulp/kevlar cone
• H.A.M.R. surround
• Cast aluminum frame with integral shorting sleeve
• Polypropylene, mica and talc dust cap
• 127 oz. Strontium ferrite segmented magnet

Power Plus Series 2-Channel Class AB Car Amplifier • 65W x 2 chan. @ 4 ohm • 90W x 2 chan. @ 2 ohm • 170W x 1 chan. @ 4 ohm • 105W x 2 chan. Max • Blue illuminated VU meter display • Preamp RCA outputs • Extruded aluminum alloy heatsink

220 watts RMS x 1 bridged • Bass Engine® with variable high-pass/low-pass crossover and tuned Bass EQ

2-channel, 250 watts amplifier

• 450 Watts x 2 @ 4 ohm
• 900 Watts x 2 @ 2 ohm
• 1800 Watts x 1 @ 4 ohm, Bridged
• Speaker-level (high-level) inputs
• 2 channel or mono operation
• Signal to Noise Ration: >90 dB
• Variable Bass Boost: 0 to +9 dB bass boost at 45 Hz
• Dimensions: 9.29" L x 13.39" W x 2.17" H

• 4 ohm: 160 watts x 2 chan.
• 2 ohm: 250 watts x 2 chan.
• Bridged, 4 ohm: 500 x 1 chan.
• Max power output: 1300 watts x 1 chan.

• 600W Max
• 300W x 2-Chan. @ 2 Ohm
• 50W x 2-Chan. RMS @ 4 Ohm
• Tri-Mode Speaker Operation Output
• Speaker-Level Inputs
• Automatic Output Power Increase At 2 Ohm