Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Discontinued Car Audio & Electronics
  3. Discontinued Car Speakers
  4. Discontinued Tweeters

Discontinued Tweeters for your 1972 Mark IV close

Exclamation Icon It’s a no-brainer.
 Get your speakers here.

Install kit discounts · Guaranteed fit · Full warranty
Filters
Show products that do not fit ✕
Clear Filters
Reset Done
Show products that do not fit
Product Type
Price Range
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Flush Mount
If the speaker or tweeter is flush mountable, then it can be installed flush to the mounting surface.

When installing a flush mount tweeter, make sure that there is enough room behind the mounting surface for the tweeter and magnet. Check the mounting depth with your specific vehicle.
Surface Mount
If the speaker or tweeter is surface mountable, then it can be installed to be raised above the mounting area.

When installing a surface mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.
Angled Mount
If the speaker or tweeter is able to be angle mounted, then the installed tweeter can be positioned at an angle. An angle mounted tweeter can improve the audible sound quality of your system.

When installing a angle mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Your Vehicle

close
Universal fit Icon
Explore universal-fit speaker products for your 1972 Mark IV
Vehicle-specific solutions are not available.
Update vehicle | Remove vehicle | Vehicle store

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Clarion NX706 High Resolution Car Stereo with XS-GS1 Super Tweeters

NX706 Navigation 7" Touch Screen Full Digital Sound Compatible Car Stereo + XS-GS1 320W 1" Hi-Resolution Audio Compatible Super Tweeter

NX706_XS-GS1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Clarion NX706 High Resolution Car Stereo with XS-GS1 Super Tweeters

NX706 Navigation 7" Touch Screen Full Digital Sound Compatible Car Stereo + XS-GS1 320W 1" Hi-Resolution Audio Compatible Super Tweeter

• Compatible with Clarion's new Full Digital Sound components system
• 15-band parametric equalizer
• 96kHz audio support
• On-board GPS Navigation
• Designed to cover ultra-high ends, with a frequency range extending past 50 kHz
• Soft dome diaphragm disperses sound across a wide area, achieving better coverage

Fitment unknown for your Mark IV

2

• Compatible with Clarion's new Full Digital Sound components system
• 15-band parametric equalizer
• 96kHz audio support
• On-board GPS Navigation
• Designed to cover ultra-high ends, with a frequency range extending past 50 kHz
• Soft dome diaphragm disperses sound across a wide area, achieving better coverage

Eurovox EV-25T

120W Max, 1" Super Silk Dome Tweeters

EV-25T big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Eurovox EV-25T

120W Max, 1" Super Silk Dome Tweeters

1" Super Silk Dome Tweeters • Peak: 120 Watts • RMS: 60 Watts • Optional Flush and Angle Mounting • Protective Grilles • 4 Ohm Impedance

Fitment unknown for your Mark IV

1" Super Silk Dome Tweeters • Peak: 120 Watts • RMS: 60 Watts • Optional Flush and Angle Mounting • Protective Grilles • 4 Ohm Impedance

Memphis 15-PRT1

1" Poly-Aluminum Dome Tweeters

15-PRT1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Memphis 15-PRT1

1" Poly-Aluminum Dome Tweeters

1" Poly-Aluminum Dome Tweeters • Peak: 100 watts • RMS: 50 watts • Impedance: 4 ohm • Sensitivity: 87 dB • Metal film crossover capacitor • Kapton voice coil former • Poly-aluminum dome

Fitment unknown for your Mark IV

1" Poly-Aluminum Dome Tweeters • Peak: 100 watts • RMS: 50 watts • Impedance: 4 ohm • Sensitivity: 87 dB • Metal film crossover capacitor • Kapton voice coil former • Poly-aluminum dome

Kicker 11KS20

KS20 - 20mm (3/4-inch) KS Series Aluminum Dome Tweeters

11KS20 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker 11KS20

KS20 - 20mm (3/4-inch) KS Series Aluminum Dome Tweeters

• 190W Max
• 95W RMS
• 3/4" Aluminum dome tweeter
• Neodymium Magnet with Ferrofluid
• Includes 12 dB/octave Crossover
• Flush, Surface, or Angle Mounting
• 4 Ohm Impedance

Fitment unknown for your Mark IV

• 190W Max
• 95W RMS
• 3/4" Aluminum dome tweeter
• Neodymium Magnet with Ferrofluid
• Includes 12 dB/octave Crossover
• Flush, Surface, or Angle Mounting
• 4 Ohm Impedance

Alpine SPR-10TW OPEN BOX COMPLETE

1" Type-R Series Silk Dome Tweeter Set with Crossover Filters

SPR-10TW big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine SPR-10TW OPEN BOX COMPLETE

1" Type-R Series Silk Dome Tweeter Set with Crossover Filters

Opened and Used, Outer box ripped
• 225W Max
• 75W RMS
• Silk Dome Tweeter
• 4 ohm Impedance
• External Crossover Filter
• Copper-Clad Aluminum Voice Coil
• High-Grade Neodymium Magnet

Fitment unknown for your Mark IV

Opened and Used, Outer box ripped
• 225W Max
• 75W RMS
• Silk Dome Tweeter
• 4 ohm Impedance
• External Crossover Filter
• Copper-Clad Aluminum Voice Coil
• High-Grade Neodymium Magnet

MTX Audio THUNDER1 1-inch Tweeter (Open Box)

200W Peak (180W RMS) 1" Thunder Series Soft Dome Component Tweeter

THUNDER1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

MTX Audio THUNDER1 1-inch Tweeter (Open Box)

200W Peak (180W RMS) 1" Thunder Series Soft Dome Component Tweeter

• 100 Watts Max, 90 Watts RMS
• 1" Soft Dome Tweeter
Surface, Angle or Flush Mountable
• 4 ohm Impedance

Fitment unknown for your Mark IV

• 100 Watts Max, 90 Watts RMS
• 1" Soft Dome Tweeter
Surface, Angle or Flush Mountable
• 4 ohm Impedance

Buy One Get One Half Off Deal, Kicker KST200 (44KST2004)

250W Peak (130W RMS) 3/4" KS Series Silk Dome Car Tweeters

44KST2004_BOGO big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Buy One Get One Half Off Deal, Kicker KST200 (44KST2004)

250W Peak (130W RMS) 3/4" KS Series Silk Dome Car Tweeters

• 3/4" KS Series Car Tweeters
• Silk Dome Tweeter
• 125W Max
• 65W RMS
• 4 ohm Impedance
• In-line 12dB Crossovers
• Lightweight Neodymium Magnets

Fitment unknown for your Mark IV

2

• 3/4" KS Series Car Tweeters
• Silk Dome Tweeter
• 125W Max
• 65W RMS
• 4 ohm Impedance
• In-line 12dB Crossovers
• Lightweight Neodymium Magnets

Kicker 08KS20

KS20 - 20mm (3/4-inch) KS Series Titanium Dome Tweeters

08KS20 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker 08KS20

KS20 - 20mm (3/4-inch) KS Series Titanium Dome Tweeters

20mm (3/4") KS Series Titanium Dome Tweeters • 190W Max • 95W RMS • 3/4" Titanium dome tweeter • Neodymium magnet with ferrofluid • Includes 12 dB/octave crossover • Flush, surface, or angle mounting • 4 ohm impedance

Fitment unknown for your Mark IV

5

20mm (3/4") KS Series Titanium Dome Tweeters • 190W Max • 95W RMS • 3/4" Titanium dome tweeter • Neodymium magnet with ferrofluid • Includes 12 dB/octave crossover • Flush, surface, or angle mounting • 4 ohm impedance

Rockford Fosgate PP4-T Open Box

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil

PP4-T big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate PP4-T Open Box

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil

1-1/2" Punch Series Car Tweeter • Aluminum Bullet Construction • 100W Max • 50W RMS • 4 ohm Impedance • Integrated 6dB High-Pass Crossover • High-Temperature Voice Coil • CEA-2031 Compliant

Fitment unknown for your Mark IV

1-1/2" Punch Series Car Tweeter • Aluminum Bullet Construction • 100W Max • 50W RMS • 4 ohm Impedance • Integrated 6dB High-Pass Crossover • High-Temperature Voice Coil • CEA-2031 Compliant

Crunch CRBT-4

3-3/4" Full Range High Output Horn Tweeter

CRBT-4 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Crunch CRBT-4

3-3/4" Full Range High Output Horn Tweeter

Single 3-3/4" Full Range High Output Horn Tweeter • 250W Max • 100W RMS • 1" Bullet Type Tweeter • 1" Extreme High Temperature Kapton • Machined Die Cast Aluminum Enclosure • 4 Ohm Impedance

Fitment unknown for your Mark IV

2

Single 3-3/4" Full Range High Output Horn Tweeter • 250W Max • 100W RMS • 1" Bullet Type Tweeter • 1" Extreme High Temperature Kapton • Machined Die Cast Aluminum Enclosure • 4 Ohm Impedance

JBL P26t Open Box

(Open Box)1" Power Series Edge-Driven Dome Tweeters

P26T big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL P26t Open Box

(Open Box)1" Power Series Edge-Driven Dome Tweeters

1" Power Series Tweeters • 180W Max • 60W RMS • Textile dome tweeter • Full edge-driven high-bandwidth operation • Lock-able multi-angle tweeter mount • Crossovers included • 4 ohm impedance

Fitment unknown for your Mark IV

1" Power Series Tweeters • 180W Max • 60W RMS • Textile dome tweeter • Full edge-driven high-bandwidth operation • Lock-able multi-angle tweeter mount • Crossovers included • 4 ohm impedance

Kicker 05KS25

1" KS-Series Aluminum Dome Tweeters -- KS25

05KS25 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker 05KS25

1" KS-Series Aluminum Dome Tweeters -- KS25

1" Aluminum Dome Tweeters • Crossovers Included • 150W RMS • Neodymium Magnet • Ferro-Fluid Cooled • HPF: 4,500 Hz , 18 dB / Oct

Fitment unknown for your Mark IV

1

1" Aluminum Dome Tweeters • Crossovers Included • 150W RMS • Neodymium Magnet • Ferro-Fluid Cooled • HPF: 4,500 Hz , 18 dB / Oct

Massive Audio F 2

1" Flare Horn Housing

F 2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Massive Audio F 2

1" Flare Horn Housing

1" Flare Horn Housing • Designed For Sonic Transfer And Crystal Clear Reproduction Of High Frequency • Made With Hand Laid Fiberglass For Exact Dispersion • Ensures No Unwanted Ringing Is Present During Playback

Fitment unknown for your Mark IV

1" Flare Horn Housing • Designed For Sonic Transfer And Crystal Clear Reproduction Of High Frequency • Made With Hand Laid Fiberglass For Exact Dispersion • Ensures No Unwanted Ringing Is Present During Playback

Soundstream SPT.305 OPEN BOX COMPLETE

100W 1.75" Pro Audio Series Car Tweeter

SPT.305 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Soundstream SPT.305 OPEN BOX COMPLETE

100W 1.75" Pro Audio Series Car Tweeter

• 200 Watts Max, 100 Watts RMS
• Aluminum Tweeter Construction
Sensitivity: 107 dB
• 4 Ohm Impedance
• Mounting Depth: 2.25"

Fitment unknown for your Mark IV

• 200 Watts Max, 100 Watts RMS
• Aluminum Tweeter Construction
Sensitivity: 107 dB
• 4 Ohm Impedance
• Mounting Depth: 2.25"

DLS Performance T20 Open Box

0.8" Performance Series Tweeter Set (Performance T 20 -- 10-21020)

T20 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

DLS Performance T20 Open Box

0.8" Performance Series Tweeter Set (Performance T 20 -- 10-21020)

0.8" Performance Series Silk Dome Car Tweeter System • 80W Peak • 50W RMS • 4 Ohm Impedance • Neodymium Magnet Structure • Rec. crossover point: 4 - 6 kHz • Fs - Resonant frequency: 1500 Hz • Multi-Mount Locations

Fitment unknown for your Mark IV

0.8" Performance Series Silk Dome Car Tweeter System • 80W Peak • 50W RMS • 4 Ohm Impedance • Neodymium Magnet Structure • Rec. crossover point: 4 - 6 kHz • Fs - Resonant frequency: 1500 Hz • Multi-Mount Locations

Image Dynamics CD-Ultra MH

HLCD Series Ultra Compact and Ultra Fidelity Mini Horn Loaded Compression Driver

No picture DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Image Dynamics CD-Ultra MH

HLCD Series Ultra Compact and Ultra Fidelity Mini Horn Loaded Compression Driver

HLCD Series Ultra Compact Mini Horn Loaded Compression Driver • 100W RMS • Throat Compression Driver • Proprietary Controlled Dispersion Pattern • Edge Wound Aluminum Ribbon Wire Voice Coil • 8 Ohm Impedance

Fitment unknown for your Mark IV

HLCD Series Ultra Compact Mini Horn Loaded Compression Driver • 100W RMS • Throat Compression Driver • Proprietary Controlled Dispersion Pattern • Edge Wound Aluminum Ribbon Wire Voice Coil • 8 Ohm Impedance

JL Audio C3-100CT (Open Box, Great)

150W RMS 1" Evolution C3 Series Silk Soft Dome Tweeters with Adjustable Output Level

C3-100CT big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JL Audio C3-100CT (Open Box, Great)

150W RMS 1" Evolution C3 Series Silk Soft Dome Tweeters with Adjustable Output Level

• 1" C3 Series Soft Dome Tweeters
• Inline 12 dB / octave high-pass filters with tweeter protectors
• 75 watts RMS Each
• 4 ohm Impedance

Fitment unknown for your Mark IV

• 1" C3 Series Soft Dome Tweeters
• Inline 12 dB / octave high-pass filters with tweeter protectors
• 75 watts RMS Each
• 4 ohm Impedance

Power Acoustik NB.2

200W Peak (100W RMS) 1” Mount Tweeters with Niobium Magnet

NB-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Power Acoustik NB.2

200W Peak (100W RMS) 1” Mount Tweeters with Niobium Magnet

1" Surface/Angle/Flush-Mount NB Series Tweeters • 200W Max • 100W RMS • Polypropylene diaphragm • Niobium (Ferroelectric Transducer) magnets • Surface or angle mount • Built-in crossover • No magnetic field • 4 ohm impedance

Universal Icon
Universal – fits most vehicles.
Shop similar products or Update vehicle
84

1" Surface/Angle/Flush-Mount NB Series Tweeters • 200W Max • 100W RMS • Polypropylene diaphragm • Niobium (Ferroelectric Transducer) magnets • Surface or angle mount • Built-in crossover • No magnetic field • 4 ohm impedance

Boston Acoustics Neo Type-M

1" Type-M2 Alloy Dome Tweeters

NEO-TYPE-M big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Boston Acoustics Neo Type-M

1" Type-M2 Alloy Dome Tweeters

1" Alloy Dome Tweeter with Slim AMD • 50W RMS • External Crossovers Included • Quick-fit Mounting Cup

Fitment unknown for your Mark IV

1" Alloy Dome Tweeter with Slim AMD • 50W RMS • External Crossovers Included • Quick-fit Mounting Cup

Earthquake Sound TW-35S

1-3/8" (35mm) TW Series Silk Soft-Dome Tweeters

No picture DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Earthquake Sound TW-35S

1-3/8" (35mm) TW Series Silk Soft-Dome Tweeters

1-3/8" TW Series Dome Tweeters • Raychem Poly-Switch Protection • Floating Rubber Suspension • 1-3/8" Silk Dome Tweeter • 18dB / Octave High Pass Filter • 4 Ohm Impedance

Fitment unknown for your Mark IV

1-3/8" TW Series Dome Tweeters • Raychem Poly-Switch Protection • Floating Rubber Suspension • 1-3/8" Silk Dome Tweeter • 18dB / Octave High Pass Filter • 4 Ohm Impedance

Prev 15 16 17 18 19 Next

Items per page: 20 40 60

    Clear all
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    1972 Lincoln Mark IV

    1998 Jeep Wrangler

    1990 Lincoln Continental

    2021 Ford Edge

    2003 Saab 9-5

    2018 Lexus RC350

    2010 Honda Insight

    2005 BMW 330xi

    1981 Ford Bronco

    1996 GMC R-V Crew

    Vehicle
    Store     Delete

    2002 Harley Davidson FXD/I Dyna Super Glide

    Vehicle
    Store     Delete

    2012 Can-Am Commander 1000 LTD

    2018 Can-Am Commander 1000 DPS

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 1972 Mark IV
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.
    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo