Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Car Audio & Electronics
  3. Car Speakers
  4. 6x9" Component Speakers

6x9" Component Speakers

Exclamation Icon It’s a no-brainer.
 Get your speakers here.

Install kit discounts · Guaranteed fit · Full warranty
Filters
Reset Done
Product Type
Price Range
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition
Availability
Gear Icon Find speakers that fit. Set your vehicle.
  • Mounting adapter brackets
  • Harness to avoid cutting vehicle wires

Shop the Category

filter-icon Filters & Sort

JL Audio C1-690 (Open Box, Great)

200W RMS 6x9" C1 Series 2-way 4-ohm Component Car Speakers

C1-690 big
Go to item page Right Arrow Icon of Right Arrow

JL Audio C1-690 (Open Box, Great)

200W RMS 6x9" C1 Series 2-way 4-ohm Component Car Speakers

• 100 watts RMS Each
• 1" Silk-Suspended Aluminum Edge Driven Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB

shipping truck icon Free shipping in USA. Provide zip for delivery date.
install icon

Free or discounted install kits when available.

checkmark icon Confirm fitment. Set your vehicle.
16
List price $189.99
-15% $161.49 /set

In stock

Add to Cart
Limited time!

Kenwood eXcelon KFC-XP6903C

600W Peak (200W RMS) 6x9" eXcelon Series 2-way 4-ohm Component Speaker System for select 2002-2024 vehicles from Toyota, Dodge, Chevrolet

KFC-XP6903C big
Go to item page Right Arrow Icon of Right Arrow

Kenwood eXcelon KFC-XP6903C

600W Peak (200W RMS) 6x9" eXcelon Series 2-way 4-ohm Component Speaker System for select 2002-2024 vehicles from Toyota, Dodge, Chevrolet

• 300 watts Peak Each, 100 watts RMS Each
• Compatible with select 2002-2024 vehicles from Toyota, Dodge, Chevrolet
• 1" Silk Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 84 dB

Free Speaker Accessory at Checkout!
shipping truck icon Free shipping in USA. Provide zip for delivery date.
VIP Star Icon

VIP Product Get $20.90 in rewards to spend later

checkmark icon Confirm fitment. Set your vehicle.
1
List price $320.00
Save $111.00
-35% $209.00

In stock

Only 1 Left!

Add to Cart
See all 14 special offers
Limited time!

Rockford Fosgate Punch P3 P3V2-69

300W Peak (150W RMS) 6x9" Punch P3 Series 3-Way 4-ohm Component Car Speaker System

P3V2-69 big
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate Punch P3 P3V2-69

300W Peak (150W RMS) 6x9" Punch P3 Series 3-Way 4-ohm Component Car Speaker System

• 150 watts Peak Each, 75 watts RMS Each
• 3/4" Tetolon Inverted Dome Tweeters
• 20-40% Mica reinforced Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB

Free Speaker Accessory Kit at Checkout!
shipping truck icon Free shipping in USA. Provide zip for delivery date.
VIP Star Icon

VIP Product Get $57.00 in rewards to spend later

install icon

Free or discounted install kits when available.

checkmark icon Confirm fitment. Set your vehicle.
List price $755.99
Save $186.00
-25% $569.99 /set

In stock

Only 1 Left!

Add to Cart
Limited time!

Alpine S2-S69C

520W Peak (170W RMS) 6x9" S-Series 2-way 4-ohm Component Speaker System

S2-S69C big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Alpine S2-S69C

520W Peak (170W RMS) 6x9" S-Series 2-way 4-ohm Component Speaker System

• 260 watts Peak Each, 85 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene, Glass Fiber and Mica cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB

Free Speaker Accessory at Checkout!
VIP Star Icon

VIP Product Get $24.00 in rewards to spend later

install icon

Free or discounted install kits when available.

checkmark icon Confirm fitment. Set your vehicle.
4
List price $290.00
-17% $239.95 /set
Notify Me
Used from: $167.96

• 260 watts Peak Each, 85 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene, Glass Fiber and Mica cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB

Limited time!

NVX XSP69KIT

600W Peak (300W RMS) 6x9" X-Series 2 Way Component Car Speakers

XSP69KIT big Out of stock
Go to item page Right Arrow Icon of Right Arrow

NVX XSP69KIT

600W Peak (300W RMS) 6x9" X-Series 2 Way Component Car Speakers

• 300 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome tweeters
• Lightweight real Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 96 dB

Free Speaker Accessory at Checkout!
VIP Star Icon

VIP Product Get $17.00 in rewards to spend later

install icon

Free or discounted install kits when available.

checkmark icon Confirm fitment. Set your vehicle.
4
List price $203.99
-17% $169.99 /set
Notify Me
Used from: $104.99

• 300 watts Peak Each, 150 watts RMS Each
• 1" Silk Dome tweeters
• Lightweight real Carbon Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 96 dB

Limited time!

Infinity Primus PR693C (INFSPKPR693C)

480W Peak (160W RMS) 6x9” Primus Series 2 Way 3-ohm Component Speaker System

PR693C big Out of stock
Go to item page Right Arrow Icon of Right Arrow

Infinity Primus PR693C (INFSPKPR693C)

480W Peak (160W RMS) 6x9” Primus Series 2 Way 3-ohm Component Speaker System

• 240 watts Peak Each, 80 watts RMS Each
• 3/4" Silk Edge Driven Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB

Free Speaker Accessory at Checkout!
VIP Star Icon

VIP Product Get $17.00 in rewards to spend later

install icon

Free or discounted install kits when available.

checkmark icon Confirm fitment. Set your vehicle.
2
List price $199.95
-15% $169.95 /set
Add to Cart

• 240 watts Peak Each, 80 watts RMS Each
• 3/4" Silk Edge Driven Dome Tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB

Kenwood eXcelon KFC-XP6902C (Open Box, Great)

600W Peak (200W RMS) 6x9" Excelon Series 2-way 4-ohm Component Speaker System for select 2002-2024 vehicles from Toyota, Dodge, Chevrolet

KFC-XP6902C big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kenwood eXcelon KFC-XP6902C (Open Box, Great)

600W Peak (200W RMS) 6x9" Excelon Series 2-way 4-ohm Component Speaker System for select 2002-2024 vehicles from Toyota, Dodge, Chevrolet

• 300 watts Peak Each, 100 watts RMS Each
• 6x9" Woofer and 2.75" Midrange
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 84 dB
• Custom fit for select 2002-2024 vehicles from Toyota, Dodge, Chevrolet

checkmark icon Confirm fitment. Set your vehicle.

• 300 watts Peak Each, 100 watts RMS Each
• 6x9" Woofer and 2.75" Midrange
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 84 dB
• Custom fit for select 2002-2024 vehicles from Toyota, Dodge, Chevrolet

Prev 1 2 3

Items per page: 20 40 60

    Clear all

    FAQ Frequently asked questions in 6x9" Component Speakers

    6x9" Component Speakers Frequently Asked Questions (FAQ)
    6x9" component speakers are a specialized type of car audio speaker system that includes separate drivers for different frequency ranges, typically a woofer for handling lows and mids and a separate tweeter for handling highs. Unlike regular 6x9" speakers, which are usually coaxial and have the tweeter mounted on top of the woofer, component speakers allow for better sound staging and imaging. With the tweeter mounted separately, it can be placed in a more optimal location for directing sound toward the listener's ears, resulting in clearer and more accurate audio reproduction. This makes 6x9" component speakers a popular choice for audiophiles and car audio enthusiasts seeking high-fidelity sound in their vehicles.
    Upgrading to 6x9" component speakers offers several advantages over factory or regular coaxial speakers. The separate tweeter provides more detailed and precise high-frequency reproduction, delivering crisp vocals and instrumentals. This enhances the overall clarity and imaging of the sound, making your music feel more immersive and engaging. Additionally, the improved sound staging creates a more realistic listening experience, as if you were sitting in a concert hall. Component speakers are also typically built with higher-quality materials and advanced engineering, resulting in better durability and longer-lasting performance. Whether you enjoy listening to music at lower volumes or cranking up the sound for a more powerful experience, 6x9" component speakers elevate your car audio to a whole new level.
    6x9" component speakers can be compatible with most vehicles, but it's crucial to ensure that they fit properly before making a purchase. Unlike coaxial speakers, component speakers require separate mounting for the woofer and tweeter, which may require additional space and modifications in your car's speaker locations. Before buying 6x9" component speakers, check the available space in your vehicle's doors, rear deck, or custom speaker enclosures to ensure a proper fit. Some vehicles may also require speaker adapters or mounting brackets for installation. If you are unsure about compatibility or installation requirements, consult with a car audio specialist or use an online fitment tool to find component speakers that are compatible with your car model.
    The installation of 6x9" component speakers can be more involved than standard coaxial speakers due to the separate tweeter placement. If you have some experience with car audio installations and the necessary tools, you may be able to handle the installation yourself. However, component speaker installation can vary depending on your car's make and model, and some vehicles may require more complex modifications or custom mounting solutions. Professional installation is recommended if you are unsure about the process or lack experience, as experts can ensure a secure and proper fit without damaging your vehicle's interior. Properly installed component speakers will deliver optimal sound performance and prevent any rattling or interference. If you want to fully enjoy the benefits of 6x9" component speakers, it's worth considering professional installation to get the best results.
    When choosing 6x9" component speakers, several factors come into play to ensure you get the best performance and value. Consider the power handling capabilities of the speakers, which should match your car audio system's power output to prevent distortion or damage. Look for speakers with high-quality materials like polypropylene cones and silk or textile dome tweeters, as these components contribute to better sound reproduction and durability. Pay attention to the sensitivity rating as well, as higher sensitivity speakers will produce louder sound with less power input, making them ideal for lower-powered head units. Lastly, consider the crossover design, which separates the frequencies between the woofer and tweeter, and ensures that each driver handles the appropriate frequency range. With careful consideration of these factors, you can find 6x9" component speakers that best suit your audio preferences and vehicle's needs.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage

    Add vehicle
    2 | Make
    3 | Model
    Why Use a Vehicle Fit Guide?
    Where to find vehicle info | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.
    2 | Make
    3 | Model
    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo