Line Out Converters at Sonic Electronix

Select vehicle to make sure it fits.

Shop the Category

JL Audio LoC-22

2-Channel Line Output Converter with Auto Turn-On

Compare

Go to item page

JL Audio LoC-22

2-Channel Line Output Converter with Auto Turn-On

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

FREE 1-day shipping to OH. Get it Wed, Nov. 19

VIP Product Get $11.00 in rewards to spend later

Universal-fit, works with nearly all vehicles.

$109.99

In stock

Add to Cart

Like New from: $81.16

Cerwin-Vega IOEM24

400 Watts 4-Channel Line Output Converter

Compare

Go to item page

Cerwin-Vega IOEM24

400 Watts 4-Channel Line Output Converter

• Active 4-channel line out converter
• Designed to integrate with aftermarket or factory OEM systems
• Preamp outputs: 2 sets
• Precision matched stereo and level gain adjustment
• Advanced ground isolation switch isolation prevents buzz and interference

FREE 3-day shipping to OH. Delivers Dec. 1 - Dec. 8

Universal-fit, works with nearly all vehicles.

$49.99

Available

Ships in 10-14 days

Add to Cart

Cerwin-Vega IOEM44

400 Watts 4-Channel Line Output Converter

Compare

Go to item page

Cerwin-Vega IOEM44

400 Watts 4-Channel Line Output Converter

• Active 2-channel line out converter
• Designed to integrate with aftermarket or factory OEM systems
• Preamp outputs: 2 sets
• Precision matched stereo and level gain adjustment
• Advanced ground isolation switch isolation prevents buzz and interference

FREE 3-day shipping to OH. Delivers Dec. 1 - Dec. 8

Universal-fit, works with nearly all vehicles.

$99.99

Available

Ships in 10-14 days

Add to Cart

Cerwin-Vega IOEM66

400 Watts 6-Channel Line Output Converter

Compare

Go to item page

Cerwin-Vega IOEM66

400 Watts 6-Channel Line Output Converter

• Active 6-channel line out converter
• Designed to integrate with aftermarket or factory OEM systems
• Preamp outputs: 3 sets (front, rear and subwoofer)
• Precision matched stereo and level gain adjustment
• Advanced ground isolation switch isolation prevents buzz and interference

FREE shipping to OH. Delivers Nov. 26 - Nov. 28

VIP Product Get $11.00 in rewards to spend later

Universal-fit, works with nearly all vehicles.

$109.99

In stock.

Add to Cart

Cerwin-Vega IOEM88

400 Watts 8-Channel Line Output Converter

Compare

Go to item page

Cerwin-Vega IOEM88

400 Watts 8-Channel Line Output Converter

• Active 8-channel line out converter
• Designed to integrate with aftermarket or factory OEM systems
• Preamp outputs: 3 sets (front, rear and subwoofer)
• Precision matched stereo and level gain adjustment
• Advanced ground isolation switch isolation prevents buzz and interference

FREE shipping to OH. Delivers Nov. 26 - Nov. 28

Universal-fit, works with nearly all vehicles.

$119.99

In stock.

Add to Cart

MTX RC-18

Polaris RideCommand Harness Adaptor

Compare

Go to item page

MTX RC-18

Polaris RideCommand Harness Adaptor

• Direct Factory Plug and Play Design
• Easy Connectivity for MUD Series Amplifiers
• Remote Turn-On Provided for Amplifier Activation
• No Cutting or Splicing of Factory Wiring Required, Will Not Effect Factory Warranty

FREE 1-day shipping to OH. Get it Wed, Nov. 19

VIP Product Get $11.00 in rewards to spend later

Make sure it fits. Select a vehicle

$109.95

In stock

Only 1 Left!

Add to Cart

Cerwin-Vega IOEM22

400 Watts 2-Channel Line Output Converter

Compare

Go to item page

Cerwin-Vega IOEM22

400 Watts 2-Channel Line Output Converter

• Active 2-channel line out converter
• Designed to integrate with aftermarket or factory OEM systems
• Preamp outputs: 1 set
• Precision matched stereo and level gain adjustment
• Advanced ground isolation switch isolation prevents buzz and interference

Fast 3-day shipping to OH. Delivers Dec. 1 - Dec. 8

Universal-fit, works with nearly all vehicles.

$39.99

Available

Ships in 10-14 days

Add to Cart

Cerwin-Vega SLMLOCT2

SYNCLINK 2 Channel High Powered Mini line output converter w/ trigger

Compare

Go to item page

Cerwin-Vega SLMLOCT2

SYNCLINK 2 Channel High Powered Mini line output converter w/ trigger

• 2-channel High-powered
• Premium adjustable line output converter
• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• Super Low Distortion

Fast 2-day shipping to OH. Get it Thu, Nov. 20

Universal-fit, works with nearly all vehicles.

Was $35.99 Details

$29.99

In stock

Add to Cart

• 2-channel High-powered
• Premium adjustable line output converter
• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• Super Low Distortion

JL Audio LoC-22 - New (Damaged Packaging, Product A+)

2-Channel Line Output Converter with Auto Turn-On

Compare

Go to item page

JL Audio LoC-22 - New (Damaged Packaging, Product A+)

2-Channel Line Output Converter with Auto Turn-On

FREE 1-day shipping to OH. Get it Wed, Nov. 19

Universal-fit, works with nearly all vehicles.

Was $109.99 Details

$81.16

In stock

Add to Cart

Clear all

FAQ Frequently asked questions in Line Out Converters

What is an amp line out converter, and why do I need one in my car audio system?

An amp line out converter, also known as a line output converter (LOC), is a device used to convert high-level speaker-level signals from a car's factory stereo into a low-level RCA signal. It allows you to connect aftermarket amplifiers or audio processors to the existing factory audio system, which often lacks RCA outputs. Using an amp line out converter is essential to ensure a clean and reliable signal transfer from your car's stereo to the aftermarket components, such as subwoofers or external amplifiers. Without a line out converter, attempting to tap into the speaker wires directly for signal input can lead to signal distortion, noise, and potential damage to your audio equipment.

How do I install an amp line out converter in my car audio system?

Installing an amp line out converter requires some basic knowledge of car audio wiring and connections. Start by identifying the speaker wires that you want to tap into for the audio signal. Use a wire stripping tool to expose a small section of the wire's insulation. Next, connect the speaker-level input wires of the line out converter to the corresponding speaker wires, ensuring proper polarity. Once the input connections are secure, connect the RCA output cables from the line out converter to the RCA inputs of your aftermarket amplifier or audio processor. Finally, connect the converter's ground wire to a suitable grounding point, typically the car's chassis. Before finalizing the installation, double-check all connections and ensure there are no loose wires.

Can I use multiple amp line out converters in my car audio setup?

Yes, you can use multiple amp line out converters in your car audio system if you require different signal outputs for various audio components. For instance, if you are amplifying multiple speakers and a subwoofer, you may need separate converters to provide the necessary signal inputs to each amplifier. When using multiple line out converters, it is crucial to ensure proper signal level matching and avoid signal clipping or distortion. Additionally, make sure that each converter's ground wire is adequately connected to prevent ground loop noise. If you are unsure about the best setup for your specific audio system, consider consulting with a professional car audio installer or technician to design an optimal configuration.

Do I need a remote turn-on wire for my amp line out converter?

In most cases, an amp line out converter requires a remote turn-on wire to activate the aftermarket amplifiers or audio processors. The remote turn-on wire is responsible for sending a signal to the amplifiers when the car's stereo is turned on. It ensures that the amplifiers power up and down along with the factory head unit, preventing unnecessary power drain and ensuring proper system operation. Locate the remote turn-on lead from your car's stereo or ignition system, and connect it to the remote turn-on input on the line out converter. This simple connection enables the entire audio system to turn on and off automatically, providing a seamless and convenient listening experience.

Can an amp line out converter improve the sound quality of my factory car audio system?

Yes, an amp line out converter can significantly improve the sound quality of your factory car audio system, especially when used in conjunction with aftermarket amplifiers and speakers. Factory head units often lack the power and audio processing capabilities of aftermarket audio equipment, resulting in subpar sound performance. By integrating an amp line out converter and adding external amplifiers, you can achieve cleaner and more powerful audio output. This setup allows you to drive high-quality aftermarket speakers or subwoofers efficiently, resulting in improved clarity, bass response, and overall audio fidelity. Additionally, many line out converters come with built-in signal processing features, such as bass restoration or line level adjustment, enabling further customization and fine-tuning of the audio output to suit your preferences.

All About Line Out Converters

Line out converters are meant for transferring a signal from an amp or source unit and converting it into high quality, low-noise pre-amp signal. Choose from our wide variety of converters to add an outstanding aftermarket amplifier and/or processor.

Are you looking for top-quality amp line out converters to enhance your car audio experience? Look no further! At Sonic Electronix, we offer a wide range of high-performance amp line out converters designed to deliver clean and powerful audio signals to your amplifiers. Upgrade your car audio system with our premium converters and enjoy superior sound quality. Explore our selection of amp line out converters to find the perfect match for your audio needs.

Amp Line Out Converters - Enhance Your Car Audio System

Amp line out converters, also known as LOCs, are an essential component for integrating aftermarket amplifiers into your car audio system. They serve as a bridge between your car's factory stereo and your amplifiers, allowing you to connect the two seamlessly. One of the most common scenarios where amp line out converters are needed is when you want to add an aftermarket subwoofer or amplifier to your car's factory audio system.

One of the key advantages of using an amp line out converter is that it enables you to tap into the existing speaker wires of your factory stereo and convert the high-level speaker outputs into a low-level RCA signal that amplifiers can understand. This ensures a clean and distortion-free audio signal, resulting in enhanced sound quality.

Another advantage of using amp line out converters is their versatility. They come in various configurations, including 2-channel, 4-channel, and even multi-channel options, making them compatible with a wide range of car audio setups. Whether you're upgrading your entire audio system or just adding a subwoofer, amp line out converters are a valuable tool to have.

Sonic Electronix - Your Source for High-Performance Amp Line Out Converters

At Sonic Electronix, we take pride in offering only the best amp line out converters from reputable brands known for their exceptional performance and reliability. Our selection includes various options to suit different audio setups and preferences.

Our team of car audio experts is always ready to assist you in finding the perfect amp line out converter for your specific needs. If you have any questions or need guidance in choosing the right converter for your car audio system, don't hesitate to reach out to us at 1-502-200-8010. We are here to ensure you make the best choice and enjoy a seamless audio upgrade.