DS18 Car Audio & Electronics

• 12.8-Volt AGM Power Cell
• Perfect for car audio stereo systems of up to 5000 watts
• Leak-proof, non-hazardous design
• Resists extreme vibrations
• 100% sealed and maintenance free
• Absorbed glass mat material

• 1500 watts Peak Each, 750 watts RMS Each
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 98.7 dB

• 1000 feet 18 gauge Speaker Wire
• CCA (Copper-Clad Aluminum) material
• Ultra-flex wiring for high flex and extra durability
• Color: Red and Black

• Fits select 2007-2018 vehicles from Jeep with standard sound systems
• Direct connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required

• 70 watts x 4 channel @ 4 ohm
• 140 watts x 4 channel @ 2 ohm
• Bridged: 220 watts x 2 channel @ 4 ohm
• Total RMS Power: 560 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 12.4-volt Absorbed Glass Mat (AGM) Battery
• Sealed Absorbed Glass Mat design
• Perfect for 750W motorcycle and ATV audio systems
• L Terminal / M5 Nut & Bolt
• Mounts upside down or in multiple configurations

• DS18 SMD-8500.1D 8500W RMS Class D SMD Series Monoblock Car Amplifier
• Integrated VM-1 Voltmeter with Digital LED Lights and Bass Remote
• XKIT02 100% Copper True Spec 1/0 Gauge Amplifier Installation Kit
• High-Performance 1.0 Farad Capacitor for Enhanced Power Stability
• Includes 2-Channel RCA Interconnect and 20 ft Speaker Cable

• Empty 10" Dual Sealed Subwoofer Enclosure
• 3/4" medium density fiberboard construction with premium carpet finish
• Sealed down-firing design
• Under rear seat enclosure mounting

• 4" PRO Series Pro Audio Tweeter
• 440 watts Peak, 160 watts RMS
• 8 ohm impedance

• Double DIN DVD Receiver
• 6.9" Capacitive Touchscreen Display
• Wired phone-mirroring for Android and iOs via USB
• 3 sets of 4.5 volts preamp outputs
• 16-Band Equalizer EQ
• Supports playback for CDs, VCDs and DVDs

• 180 watts x 4 channel + 700 watts x 1 channel @ 4 ohm
• 250 watts x 4 channel + 1100 watts x 1 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm + 1100 watts x 1 channel @ 2 ohm
• Total RMS Power: 2800 watts
• Class AB / D 1 ohm Stable 5-Channel Amplifier

• 1" Throat compression driver
• Titanium Diaphragm Material
• 600 watts Peak, 300 watts RMS
• 8 ohm Impedance

• 3.8" PRO-TWX Series 4-ohm Aluminum Super Bullet Tweeter
• 500 watts Peak Each
• Program Power: 250 watts each
• 125 watts RMS Each
• 8 ohm Impedance
• Sensitivity: 108 dB (1w/1m)

• 4" x 5.35" PRO-TW Series 4-ohm Aluminum Super Bullet Tweeter
• RGB LED illumination
• 500 watts Peak Each
• 250 watts RMS Each
• 4 ohm Impedance
• Sensitivity: 107 dB

• 2" Throat Bolt-on Compression Driver
• 800 watts Peak, 200 watts RMS
• 8-ohm Impedance
• 12 oz. Neodymium magnet
• 3" Kapton former voice coil

• Aluminum compression driver and bullet tweeter hybrid
• PEI (Polyetherimide) Diaphragm Material
• 500 watts Peak, 170 watts RMS
• 4 ohm Impedance
• Painted in high gloss black

• 6.5" Dual Sealed Subwoofer Enclosure for select 2015-2019 vehicles from Polaris
• Medium Density Fiberboard (MDF) construction
• Total box volume: 0.3 cubic feet
• Built-in damping material inside
• Installation hardware and wiring included
• IP65 rated water resistant

• 120 watts Peak Each, 40 watts RMS Each
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB

• RCA Line-Level and Remote Output Harness
• Compatible with select 2015-2018 vehicles from Polaris with Ride Command systems
• Provides four additional RCA channels
• Dedicated remote amp turn-on wire

• 4-Channel Input and 8-Channel Output Digital Sound Processor
• 4 RCA inputs and 8 fully configurable RCA outputs
• Bluetooth 5.1 iOS/Android app control
• 31-band parametric EQ per channel
• Signal-to-noise ratio: 101dB
• Total harmonic distortion (THD): 0.04%