Top Sellers
Top Sellers in
450W Peak 120W RMS 6" x 9" C1 Coaxial Car Speakers with Speaker Baffles and Sound Dampening
450W Peak 120W RMS 6" x 9" C1 Coaxial Car Speakers with Speaker Baffles and Sound Dampening
• 225 Watts Max Each, 60 Watts RMS Each
• 1", Aluminum Dome Tweeter
• Mineral-Filled, Injection-Molded Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 94 dB
• Mounting Depth: 2.75"
• 225 Watts Max Each, 60 Watts RMS Each
• 1", Aluminum Dome Tweeter
• Mineral-Filled, Injection-Molded Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 94 dB
• Mounting Depth: 2.75"
(450W Max) 5" x 7" 2-Way Evolution C3 Series Convertible Component/Coaxial Car Speaker System with Sound Dampening
(450W Max) 5" x 7" 2-Way Evolution C3 Series Convertible Component/Coaxial Car Speaker System with Sound Dampening
• Peak Power: 225 watts per channel
• RMS Power: 75 watts per channel
• 2-Way Convertible Component/Coaxial Speakers System
• Mineral-Filled Polypropylene Cone
• 1" Silk Dome Tweeter
• DMA-Optimized Motor System
• Symmetrical Roll Spider
• Peak Power: 225 watts per channel
• RMS Power: 75 watts per channel
• 2-Way Convertible Component/Coaxial Speakers System
• Mineral-Filled Polypropylene Cone
• 1" Silk Dome Tweeter
• DMA-Optimized Motor System
• Symmetrical Roll Spider
150W 6.0" Evolution C2 Series Component Woofer with Sound Deadening
150W 6.0" Evolution C2 Series Component Woofer with Sound Deadening
• Peak Power: 150W
• RMS Power: 60W
• Injection Molded Mica Filled Polypropylene Cone
• Butyl Rubber Surround
• Symmetrical Roll Spider
• 1" Voice Coil on Kapton Former
• Ferrite Magnet Structure
• Peak Power: 150W
• RMS Power: 60W
• Injection Molded Mica Filled Polypropylene Cone
• Butyl Rubber Surround
• Symmetrical Roll Spider
• 1" Voice Coil on Kapton Former
• Ferrite Magnet Structure
(450W Max) Evolution C3 Series 5.25" 2-Way Convertible Car Speakers with Sound Dampening and Speaker Baffles
(450W Max) Evolution C3 Series 5.25" 2-Way Convertible Car Speakers with Sound Dampening and Speaker Baffles
• Peak Power: 225 watts per channel
• RMS Power: 75 watts per channel
• 2-Way Convertible Component/Coaxial Speakers System
• Mineral-Filled Polypropylene Cone
• 1" Silk Dome Tweeter
• DMA-Optimized Motor System
• Symmetrical Roll Spider
• Peak Power: 225 watts per channel
• RMS Power: 75 watts per channel
• 2-Way Convertible Component/Coaxial Speakers System
• Mineral-Filled Polypropylene Cone
• 1" Silk Dome Tweeter
• DMA-Optimized Motor System
• Symmetrical Roll Spider
450W 2-Way Evolution C2 Series Component Car Speakers System
450W 2-Way Evolution C2 Series Component Car Speakers System
• Peak Power: 225 watts per channel
• RMS Power: 60 watts per channel
• 0.75" Silk Dome Tweeter
• Injection Molded, Mica-filled Polypropylene Cone
• 3-Position Adjustable Tweeter Level
• 4 Ohms Impedance
• Sensitivity: 91.0 dB @ 1 watt / 1 meter
• Peak Power: 225 watts per channel
• RMS Power: 60 watts per channel
• 0.75" Silk Dome Tweeter
• Injection Molded, Mica-filled Polypropylene Cone
• 3-Position Adjustable Tweeter Level
• 4 Ohms Impedance
• Sensitivity: 91.0 dB @ 1 watt / 1 meter
450W Peak (100W RMS) 5" x 7" (6" x 8") C1 2-Way Coaxial Speakers + Sound Dampening
450W Peak (100W RMS) 5" x 7" (6" x 8") C1 2-Way Coaxial Speakers + Sound Dampening
• 225 Watts Max Each, 50 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 90.5 dB
• Mounting Depth: 2.46"
• 225 Watts Max Each, 50 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 90.5 dB
• Mounting Depth: 2.46"
7.7" 70W Marine Coaxial Speakers with RGB LED Lighting Gunmetal Sport Grilles
7.7" 70W Marine Coaxial Speakers with RGB LED Lighting Gunmetal Sport Grilles
• 70 Watts Max Each, 35 Watts RMS Each
• Injection-molded mica-filled polypropylene cone
• Specifically engineered polymer baskets are corrosion
• 4 Ohms Impedance
• Sensitivity: 89.5 dB
• Marine-grade stainless steel mounting hardware is included.
• Color: Gunmetal
• Transflective™ LED Lighting
• 70 Watts Max Each, 35 Watts RMS Each
• Injection-molded mica-filled polypropylene cone
• Specifically engineered polymer baskets are corrosion
• 4 Ohms Impedance
• Sensitivity: 89.5 dB
• Marine-grade stainless steel mounting hardware is included.
• Color: Gunmetal
• Transflective™ LED Lighting
23 ft 16 Gauge Speaker Wire (CCA)
450W Peak (100W RMS) C1 5.25" 2-Way Coaxial Car Speakers with Sound Dampening
450W Peak (100W RMS) C1 5.25" 2-Way Coaxial Car Speakers with Sound Dampening
• 225 Watts Max Each, 50 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 89 dB
• Mounting Depth: 2.42"
• 225 Watts Max Each, 50 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 89 dB
• Mounting Depth: 2.42"
450W Max (120W RMS) 6x9" C1 3-Way Coaxial Car Speakers + Sound Dampening
450W Max (120W RMS) 6x9" C1 3-Way Coaxial Car Speakers + Sound Dampening
• 225 Watts Max Each, 60 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 90.5 dB
• Mounting Depth: 2.75"
• 225 Watts Max Each, 60 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 90.5 dB
• Mounting Depth: 2.75"
400W 12" TW3 (Thin-Line) Series Dual 4-ohm Shallow Mount Subwoofer
400W 12" TW3 (Thin-Line) Series Dual 4-ohm Shallow Mount Subwoofer
• Mounting depth: 3.50 "
• Precision-built in USA at JL Audio’s Miramar, Florida factory
• Injection molded, mica-filled polypropylene cone
• Rubber Surround
• Cast Alloy Basket
• DMA-optimized motor design
• Very small sealed enclosure volume requirements
• Mounting depth: 3.50 "
• Precision-built in USA at JL Audio’s Miramar, Florida factory
• Injection molded, mica-filled polypropylene cone
• Rubber Surround
• Cast Alloy Basket
• DMA-optimized motor design
• Very small sealed enclosure volume requirements
Supreme and comfortable KN95 PFF2 Mask Respirators
Get true gauge JL Audio speaker wire to match your JL Audio subwoofer!
NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!
200W M Series 2-Channel Class D Full-Range Marine Amplifier with High-Speed NexD Switching Design
200W M Series 2-Channel Class D Full-Range Marine Amplifier with High-Speed NexD Switching Design
• RMS: 75 W x 2 @ 4 ohms, 100 W x 2 @ 2 ohms, 200 W x 1 @ 4 ohms Bridged
• NexD Switching Technology
• Advanced Rollback Protection
• Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
• Detented, Calibrated Filter Freq. Potentiometer
• RMS: 75 W x 2 @ 4 ohms, 100 W x 2 @ 2 ohms, 200 W x 1 @ 4 ohms Bridged
• NexD Switching Technology
• Advanced Rollback Protection
• Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
• Detented, Calibrated Filter Freq. Potentiometer
2-Channel Line Out Converter
Perfect for any installation and troubleshooting
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
400W 12" TW3 (Thin-Line) Series Dual 8-ohm Shallow Mount Subwoofer
400W 12" TW3 (Thin-Line) Series Dual 8-ohm Shallow Mount Subwoofer
• Mounting depth: 3.50 "
• Precision-built in USA at JL Audio’s Miramar, Florida factory
• Injection molded, mica-filled polypropylene cone
• Rubber Surround
• Cast Alloy Basket
• DMA-optimized motor design
• Very small sealed enclosure volume requirements
• Mounting depth: 3.50 "
• Precision-built in USA at JL Audio’s Miramar, Florida factory
• Injection molded, mica-filled polypropylene cone
• Rubber Surround
• Cast Alloy Basket
• DMA-optimized motor design
• Very small sealed enclosure volume requirements
Supreme and comfortable KN95 PFF2 Mask Respirators
Get true gauge JL Audio speaker wire to match your JL Audio subwoofer!
NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!
450W Max (120W RMS) 5.25" 2-Way Component Car Speakers System with Sound Dampening and Speaker Baffles
450W Max (120W RMS) 5.25" 2-Way Component Car Speakers System with Sound Dampening and Speaker Baffles
• Peak Power: 225 watts per channel
• RMS Power: 60 watts per channel
• 0.75" Silk Dome Tweeter
• Injection Molded, Mica-filled Polypropylene Cone
• 3-Position Adjustable Tweeter Level
• 4 Ohms Impedance
• Sensitivity: 89.0 dB @ 1 watt / 1 meter
• Peak Power: 225 watts per channel
• RMS Power: 60 watts per channel
• 0.75" Silk Dome Tweeter
• Injection Molded, Mica-filled Polypropylene Cone
• 3-Position Adjustable Tweeter Level
• 4 Ohms Impedance
• Sensitivity: 89.0 dB @ 1 watt / 1 meter
450W Peak (100W RMS) 6.5" C1 2-Way Coaxial Car Speakers (C1650x)
450W Peak (100W RMS) 6.5" C1 2-Way Coaxial Car Speakers (C1650x)
• 225 Watts Max Each, 50 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.07"
• 225 Watts Max Each, 50 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 93 dB
• Mounting Depth: 2.07"
M6 10" Marine Subwoofer (250 W 4 Ω) Gunmetal Trim Ring, Titanium Sport Grille
M6 10" Marine Subwoofer (250 W 4 Ω) Gunmetal Trim Ring, Titanium Sport Grille
• 10" Marine Subwoofer
• Power: 250 W RMS 4 Ohm
• Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure.
• Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system
• Injection-molded mica-filled polypropylene cone bodies with synthetic rubber surrounds
• 10" Marine Subwoofer
• Power: 250 W RMS 4 Ohm
• Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure.
• Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system
• Injection-molded mica-filled polypropylene cone bodies with synthetic rubber surrounds
Get true gauge JL Audio speaker wire to match your JL Audio subwoofer!
NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!
Perfect addition to any toolbox
450W Peak (100W RMS) C1 5.25" 2-Way Coaxial Car Speakers + NVX Speaker Baffles, Sound Dampening, Roller and Panel Removal Kit
450W Peak (100W RMS) C1 5.25" 2-Way Coaxial Car Speakers + NVX Speaker Baffles, Sound Dampening, Roller and Panel Removal Kit
• 225 Watts Max Each, 50 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 89 dB
• Mounting Depth: 2.42"
• 225 Watts Max Each, 50 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 89 dB
• Mounting Depth: 2.42"
50W Max (25W RMS) 3.5" 2-Way Evolution C2 Series Coaxial Car Speakers with Sound Dampening
50W Max (25W RMS) 3.5" 2-Way Evolution C2 Series Coaxial Car Speakers with Sound Dampening
• Peak Power: 75 watts each
• RMS Power: 25 watts each
• 0.75" Silk Dome Tweeter
• Injection Molded, Mica-filled Polypropylene Cone
• Top-mount depth: 1.50"
• 4 Ohms Impedance
• Sensitivity: 83.0 dB @ 1 watt / 1 meter
• Peak Power: 75 watts each
• RMS Power: 25 watts each
• 0.75" Silk Dome Tweeter
• Injection Molded, Mica-filled Polypropylene Cone
• Top-mount depth: 1.50"
• 4 Ohms Impedance
• Sensitivity: 83.0 dB @ 1 watt / 1 meter
(450W Max) 6" 2-Way Evolution C2 Series Coaxial Car Speakers with Sound Deadening
(450W Max) 6" 2-Way Evolution C2 Series Coaxial Car Speakers with Sound Deadening
• Peak Power: 225 watts each
• RMS Power: 60 watts each
• 0.75" Silk Dome Tweeter
• Injection Molded, Mica-filled Polypropylene Cone
• Top-mount depth: 2.38"
• 4 Ohms Impedance
• Sensitivity: 90.5 dB @ 1 watt / 1 meter
• Peak Power: 225 watts each
• RMS Power: 60 watts each
• 0.75" Silk Dome Tweeter
• Injection Molded, Mica-filled Polypropylene Cone
• Top-mount depth: 2.38"
• 4 Ohms Impedance
• Sensitivity: 90.5 dB @ 1 watt / 1 meter
450W Max (120W RMS) 6x9" C1 3-Way Coaxial Car Speakers + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
450W Max (120W RMS) 6x9" C1 3-Way Coaxial Car Speakers + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 225 Watts Max Each, 60 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 90.5 dB
• Mounting Depth: 2.75"
• 225 Watts Max Each, 60 Watts RMS Each
• 3/4" Aluminum Dome Tweeter
• Mineral-Filled Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 90.5 dB
• Mounting Depth: 2.75"
450W Peak (120W RMS) 6" x 9" C1 2-Way Component Car Speakers (C1690) + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
450W Peak (120W RMS) 6" x 9" C1 2-Way Component Car Speakers (C1690) + NVX Speaker Baffles, Sound Dampening, Roller, and Panel Removal Kit
• 225 Watts Max Each Side, 60 Watts RMS Each Side
• 1", Aluminum Dome Tweeter
• Mineral-Filled, Injection-Molded Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 94 dB
• Mounting Depth: 2.75"
• 225 Watts Max Each Side, 60 Watts RMS Each Side
• 1", Aluminum Dome Tweeter
• Mineral-Filled, Injection-Molded Polypropylene Cone
• 4 Ohms Impedance
• Sensitivity: 94 dB
• Mounting Depth: 2.75"
Save up to 10 different vehicles in your garage