Hifonics Car Amplifier Packages & Bundles

filter-icon Filters & Sort
Loading...
Filters

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

The lowest impedance the amplifier will handle when it is not bridged.
The lowest impedance the amplifier will handle when it is bridged.
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
Hifonics ZD-1350.1D with Amplifier Wiring Kit

1350W RMS Zeus Delta Series Class-D Monoblock Car Amplifier

ZD-1350.1D, BAK42 main
Go to item page

1350W RMS Zeus Delta Series Class-D Monoblock Car Amplifier

• 1350 watts x 1 channel @ 4 ohm
• 675 watts x 1 channel @ 2 ohms
• 350 watts x 1 channel @ 1 ohm
• Class D 1 ohms Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

140
List $259.98
$169.98

In stock

Only 2 Left!

• 1350 watts x 1 channel @ 4 ohm
• 675 watts x 1 channel @ 2 ohms
• 350 watts x 1 channel @ 1 ohm
• Class D 1 ohms Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Hifonics ZD-2550.1D with Amplifier Wiring Kit

2550W RMS Zeus Delta Series Class-D Monoblock Car Amplifier

ZD-2550.1D, BAK42 main
Go to item page

2550W RMS Zeus Delta Series Class-D Monoblock Car Amplifier

• 650 watts x 1 channel @ 4 ohm
• 1275 watts x 1 channel @ 2 ohms
• 2550 watts x 1 channel @ 1 ohm
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

140
List $309.98
$204.98

In stock

Only 2 Left!

• 650 watts x 1 channel @ 4 ohm
• 1275 watts x 1 channel @ 2 ohms
• 2550 watts x 1 channel @ 1 ohm
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Hifonics ZD-3350.1D with Amplifier Wiring Kit

3350W RMS Zeus Delta Series Class-D Monoblock Car Amplifier

ZD-3350.1D, BAK02 main
Go to item page

3350W RMS Zeus Delta Series Class-D Monoblock Car Amplifier

• 850 watts x 1 channel @ 4 ohm
• 1675 watts x 1 channel @ 2 ohms
• 3350 watts x 1 channel @ 1 ohm
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

53
List $369.98
$249.99

In stock

Only 1 Left!

• 850 watts x 1 channel @ 4 ohm
• 1675 watts x 1 channel @ 2 ohms
• 3350 watts x 1 channel @ 1 ohm
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Hifonics ZD-1350.2D with Amplifier Wiring Kit

1350W RMS Zeus Delta Series Class-D 2-Channel Car Amplifier

ZD-1350.2D, BAK42 main
Go to item page

1350W RMS Zeus Delta Series Class-D 2-Channel Car Amplifier

• 350 watts x 2 channel @ 4 ohms
• 675 watts x 2 channel @ 2 ohms
• Bridged: 1350 watts x 1 channel @ 4 ohms
• Class D 2 ohms Stable 2-Channel Amplifier
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

140
List $209.98
$149.98

In stock

Only 3 Left!

• 350 watts x 2 channel @ 4 ohms
• 675 watts x 2 channel @ 2 ohms
• Bridged: 1350 watts x 1 channel @ 4 ohms
• Class D 2 ohms Stable 2-Channel Amplifier
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Hifonics ZD-750.4D with Amplifier Wiring Kit

750W RMS Zeus Delta Series Class-D 4-Channel Car Amplifier

ZD-750.4D, BAK44 main
Go to item page

750W RMS Zeus Delta Series Class-D 4-Channel Car Amplifier

• 100 watts x 4 channel @ 4 ohms
• 175 watts x 4 channel @ 2 ohms
• Bridged: 375 watts x 2 channel @ 4 ohms
• Class D 2 ohms Stable 4-Channel Amplifier
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

46
List $229.98
$159.98

In stock

• 100 watts x 4 channel @ 4 ohms
• 175 watts x 4 channel @ 2 ohms
• Bridged: 375 watts x 2 channel @ 4 ohms
• Class D 2 ohms Stable 4-Channel Amplifier
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Hifonics ZD-1350.4D with Amplifier Wiring Kit

1350W RMS Zeus Delta Series Class-D 4-Channel Car Amplifier

ZD-1350.4D, BAK44 main
Go to item page

1350W RMS Zeus Delta Series Class-D 4-Channel Car Amplifier

• 170 watts x 4 channel @ 4 ohms
• 335 watts x 4 channel @ 2 ohms
• Bridged: 675 watts x 2 channel @ 4 ohms
• Class D 2 ohms Stable 4-Channel Amplifier
• Includes Amplifier Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

46
List $329.98
$219.98

In stock

Only 3 Left!

• 170 watts x 4 channel @ 4 ohms
• 335 watts x 4 channel @ 2 ohms
• Bridged: 675 watts x 2 channel @ 4 ohms
• Class D 2 ohms Stable 4-Channel Amplifier
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Hifonics TPS-A500.2 + Belva BAK82 8 Gauge Amp Wiring Kit

500W Peak THOR Series Class-D 2-Channel 2-Ohm Stable Powersports Amplifier

TPS-A500.2, BAK82 main
Go to item page

500W Peak THOR Series Class-D 2-Channel 2-Ohm Stable Powersports Amplifier

• 125 Watts Peak x 4 @ 4 ohms
• 250 Watts Peak x 4 @ 2 ohms
• Total Peak Power: 500 Watts
• Built to withstand various elements
•Variable Bass Boost
• Aluminum Heatsink
• 3.7" L x 5.51" W x 1.77 " H
• Includes Belva BAK82 8 Gauge Amp Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

65
List $229.98
$149.98

In stock

Only 2 Left!

• 125 Watts Peak x 4 @ 4 ohms
• 250 Watts Peak x 4 @ 2 ohms
• Total Peak Power: 500 Watts
• Built to withstand various elements
•Variable Bass Boost
• Aluminum Heatsink
• 3.7" L x 5.51" W x 1.77 " H
• Includes Belva BAK82 8 Gauge Amp Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
Hifonics TPS-A600.5 + Belva BAK84 Amp Kit with Extra RCA's

600W Peak THOR Series Class-D 5-Channel 2-Ohm Stable Powersports Amplifier + Belva8 Gauge 6-Channel Amp Wiring Kit

TPS-A600.5, BAK84, BBIC5 main
Go to item page

600W Peak THOR Series Class-D 5-Channel 2-Ohm Stable Powersports Amplifier + Belva8 Gauge 6-Channel Amp Wiring Kit

• 40 Watts Peak x 4, 100 Watts Subwoofer Chan. @ 4 ohms
• 80 Watts Peak x 4, 200 Watts Subwoofer Chan. @ 2 ohms
• Total Peak Power: 350 Watts
• Built to withstand various elements
•Variable Bass Boost
• Aluminum Heatsink
• 3.7" L x 8.46" W x 1.77 " H

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

33
List $379.97
$219.99

In stock

• 40 Watts Peak x 4, 100 Watts Subwoofer Chan. @ 4 ohms
• 80 Watts Peak x 4, 200 Watts Subwoofer Chan. @ 2 ohms
• Total Peak Power: 350 Watts
• Built to withstand various elements
•Variable Bass Boost
• Aluminum Heatsink
• 3.7" L x 8.46" W x 1.77 " H

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
Hifonics TPS-A350.4 + Belva BAK84 8 Gauge Amp Wiring Kit

350 W Peak THOR Series Class-D 4-Channel 2-Ohm Stable Amplifier

TPS-A350.4, BAK84 main
Go to item page

350 W Peak THOR Series Class-D 4-Channel 2-Ohm Stable Amplifier

• 40 Watts Peak x 4 @ 4 ohms
• 80 Watts Peak x 4 @ 2 ohms
• Total Peak Power: 350 Watts
• Built to withstand various elements
•Variable Bass Boost
• Aluminum Heatsink
• 3.7" L x 5.5" W x 1.77 " H
• Includes Belva BAK84 8 Gauge Amp Wiring Kit

shipping truck icon
FREE 3-day shipping to VA. Get it Wed, Mar. 29

empty

17
List $239.98
$141.98

In stock

Only 2 Left!

• 40 Watts Peak x 4 @ 4 ohms
• 80 Watts Peak x 4 @ 2 ohms
• Total Peak Power: 350 Watts
• Built to withstand various elements
•Variable Bass Boost
• Aluminum Heatsink
• 3.7" L x 5.5" W x 1.77 " H
• Includes Belva BAK84 8 Gauge Amp Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
Hifonics A800.4D + NVX XFLOC4 Line-Output-Converter + Amp Kit

Class-D Compact 800 Watt 4-Channel Amplifier + NVX 4-Channel L.O.C. + 8 Gauge Amp Kit

Go to item page

Class-D Compact 800 Watt 4-Channel Amplifier + NVX 4-Channel L.O.C. + 8 Gauge Amp Kit

• 4 ohms: 100 Watts x 4 chan. / 2 ohms: 200 Watts x 4 chan. / 4 Ohms Bridged : 400 Watts x 2 chan.
• Total power output: 800 Watts
• Pulse Width Modulated MOSFET power supply
• Accu-Cross crossovers allow for complete control of the signal directing to all speakers
• The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
• Frequency Response: 10 - 250 Hz

empty

42
List $354.97
$254.98

• 4 ohms: 100 Watts x 4 chan. / 2 ohms: 200 Watts x 4 chan. / 4 Ohms Bridged : 400 Watts x 2 chan.
• Total power output: 800 Watts
• Pulse Width Modulated MOSFET power supply
• Accu-Cross crossovers allow for complete control of the signal directing to all speakers
• The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
• Frequency Response: 10 - 250 Hz

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Hifonics TPS-A500.1 + Belva BAK82 8 Gauge Amp Wiring Kit

500W Peak THOR Series Class-D Monoblock 2-Ohm Stable Powersports Amplifier

Go to item page

500W Peak THOR Series Class-D Monoblock 2-Ohm Stable Powersports Amplifier

• 250 Watts Peak x 4 @ 4 ohms
• 500 Watts Peak x 4 @ 2 ohms
• Total Peak Power: 500 Watts
• Built to withstand various elements
•Variable Bass Boost
• Aluminum Heatsink
• 3.7" L x 5.51" W x 1.77 " H
• Includes Belva BAK82 8 Gauge Amp Wiring Kit

empty

65
List $229.98
$129.98

• 250 Watts Peak x 4 @ 4 ohms
• 500 Watts Peak x 4 @ 2 ohms
• Total Peak Power: 500 Watts
• Built to withstand various elements
•Variable Bass Boost
• Aluminum Heatsink
• 3.7" L x 5.51" W x 1.77 " H
• Includes Belva BAK82 8 Gauge Amp Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
Hifonics ZD-1950.1D with Amplifier Wiring Kit

1950W RMS Zeus Delta Series Class-D Monoblock Car Amplifier

Go to item page

1950W RMS Zeus Delta Series Class-D Monoblock Car Amplifier

• 450 watts x 1 channel @ 4 ohm
• 975 watts x 1 channel @ 2 ohms
• 1950 watts x 1 channel @ 1 ohm
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

empty

140
List $289.98
$187.48

• 450 watts x 1 channel @ 4 ohm
• 975 watts x 1 channel @ 2 ohms
• 1950 watts x 1 channel @ 1 ohm
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
Hifonics ZD-1750.5D with Amplifier Wiring Kit

1350W RMS Zeus Delta Series Class-D 5-Channel Car Amplifier

Go to item page

1350W RMS Zeus Delta Series Class-D 5-Channel Car Amplifier

• 100 watts x 4 channel + 225 watts x 1 channel @ 4 ohms
• 225 watts x 4 channel + 450 watts x 1 channel @ 2 ohms
• Bridged: 450 watts x 2 channel @ 4 ohms + 450 watts x 1 channel @ 2 ohms
• Total RMS Power: 1350 watts
• Class D 1 ohms Stable 5-Channel Amplifier
• Includes Amplifier Wiring Kit

empty

11
List $369.98
$242.48

• 100 watts x 4 channel + 225 watts x 1 channel @ 4 ohms
• 225 watts x 4 channel + 450 watts x 1 channel @ 2 ohms
• Bridged: 450 watts x 2 channel @ 4 ohms + 450 watts x 1 channel @ 2 ohms
• Total RMS Power: 1350 watts
• Class D 1 ohms Stable 5-Channel Amplifier
• Includes Amplifier Wiring Kit

Item Added to Cart.

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$99.99

Add
50-pack of KN95 masks

Supreme and comfortable KN95 PFF2 Mask Respirators

$37.40

Add
    clear all items
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?

    Add vehicle

    Save up to 10 different vehicles in your garage

    Loading...
    < Back