Phoenix Gold 6.5" Speakers at Sonic Electronix

Phoenix Gold 6.5" Speakers

Loading...
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
listview icon
gridview icon
Phoenix Gold RX65CX

RX 6.5" 100W COAXIAL SPEAKER

RX65CX main
Go to item page

RX 6.5" 100W COAXIAL SPEAKER

• 50W RMS power per speaker
• Pair of speakers
• 6.5" RX-Series Coaxial
• 19mm BALANCED DRIVE MYLAR TWEETER
• LAMINATE-TREATED PAPER CONE
• POLYMIDE VOICE COIL FORMER
• RIGID POWDER COATED STEEL FRAME

1
Phoenix Gold RX65CX

RX 6.5" 100W COAXIAL SPEAKER

In stock

Only 2 Left!

$69.00 (14.49% off)
$59.00

PAIR

Hide info
More info Item page
2 Special offers
  • Save 50% off a pair of 6.5" speaker baffles with egg foam!
  • Get 25% off NVX Silicone Rubber Speaker Baffle Rings
    clear all items