Soundstream Class-D Amplifiers at Sonic Electronix

Soundstream Class-D Amplifiers

Class-D amplifiers by Soundstream are built with strong aluminum housing and compact design.
Filters
Loading...
Filters

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
The lowest impedance the amplifier will handle when it is not bridged.
The lowest impedance the amplifier will handle when it is bridged.
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
listview icon
gridview icon
Soundstream RN1.5000D

5000 Watt Peak (2500W RMS) Rubicon Nano Series Class-D 1-Ohm Stable Monoblock Amplifier

RN1.5000D main
Go to item page

5000 Watt Peak (2500W RMS) Rubicon Nano Series Class-D 1-Ohm Stable Monoblock Amplifier

• 1000 Watts RMS x 1 @ 4 ohms
• 1500 Watts RMS x 1 @ 2 ohms
•2500 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 5000 Watts
• Wired remote bass level control included
• Heavy duty hybrid aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 6.5"W x 17.75"L x 1.5"H

2
Soundstream RN1.5000D

5000 Watt Peak (2500W RMS) Rubicon Nano Series Class-D 1-Ohm Stable Monoblock Amplifier

In stock

$379.99 (27.37% off)
$275.99
Hide info
More info Item page
1 Special offer
  • 25% Off a 4 Gauge Installation Kit with Purchase!

Item Added to Cart

RN1.5000D small

5000 Watt Peak (2500W RMS) Rubicon Nano Series Class-D 1-Ohm Stable Monoblock Amplifier

$275.99

Keep Shopping

Belva BAK42BK 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$29.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$16.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream RN1.5000D.
Soundstream RN1.3000D

3000 Watt Peak (1500W RMS) Rubicon Nano Series Class D 1-Ohm Stable Monoblock Amplifier

RN1.3000D main
Go to item page

3000 Watt Peak (1500W RMS) Rubicon Nano Series Class D 1-Ohm Stable Monoblock Amplifier

• 600 Watts RMS x 1 @ 4 ohms
• 900 Watts RMS x 1 @ 2 ohms
•1500 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 3000 Watts
• Wired remote bass level control included
• Heavy duty hybrid aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 6.5"W x 10.25"L x 1.5"H

2
Soundstream RN1.3000D

3000 Watt Peak (1500W RMS) Rubicon Nano Series Class D 1-Ohm Stable Monoblock Amplifier

In stock

$269.99 (29.63% off)
$189.99
Hide info
More info Item page
1 Special offer
  • 25% Off a 4 Gauge Installation Kit with Purchase!

Item Added to Cart

RN1.3000D small

3000 Watt Peak (1500W RMS) Rubicon Nano Series Class D 1-Ohm Stable Monoblock Amplifier

$189.99

Keep Shopping

Belva BAK42BK 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$29.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream RN1.3000D.
Soundstream AR1.8000D - Class-D Monoblock

8,000W Peak (4,000W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier

AR1.8000D main
Go to item page

8,000W Peak (4,000W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier

• 1500 Watts RMS x 1 @ 4 ohms
• 2500 Watts RMS x 1 @ 2 ohms
• 4000 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 8000 Watts
• Built-in low-pass filter
• Variable Bass Boost
• Aluminum Heatsink
• 8.5" W x 18.5" L x 2" H

10
Soundstream AR1.8000D - Class-D Monoblock

8,000W Peak (4,000W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier

In stock

$299.99 (13.33% off)
$259.99
Hide info
More info Item page
1 Special offer
  • 50% Off a 4 Gauge Installation Kit with Purchase!

Item Added to Cart

AR1.8000D small

8,000W Peak (4,000W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier

$259.99

Keep Shopping

Belva BAK42BK 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$29.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$16.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream AR1.8000D - Class-D Monoblock.
Soundstream ST2.1000D

1000W Max (500W RMS) Stealth Series 2 ohm Stable 2-Channel Class-D Amplifier

ST2.1000D main
Go to item page

1000W Max (500W RMS) Stealth Series 2 ohm Stable 2-Channel Class-D Amplifier

• 140 Watts RMS x 2 @ 4 ohms
• 250 Watts RMS x 2 @ 2 ohms
• 500 Watts RMS x 1 @ 4 ohms, Bridged
• Total Peak Power: 1000 Watts
• Variable Crossovers
• Small Footprint for Easy Installation
• Aluminum Heatsink
• Dimensions:3 " W x 6.5" L x 1.5" H

1
Soundstream ST2.1000D

1000W Max (500W RMS) Stealth Series 2 ohm Stable 2-Channel Class-D Amplifier

In stock

$149.99 (26.67% off)
$109.99
Hide info
More info Item page
2 Special offers
  • Save 20% off a 8-pack 8 gauge ferrule with heat shrink
  • Save 10% on an 8 Gauge Amp Kit with Purchase!

Item Added to Cart

ST2.1000D small

1000W Max (500W RMS) Stealth Series 2 ohm Stable 2-Channel Class-D Amplifier

$109.99

Keep Shopping

Belva BAK82

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects

$29.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream ST2.1000D.
Soundstream PN4.520D

520W Picasso Nano Series Class-D Digital 4-Channel Amplifier

PN4.520D main
Go to item page

520W Picasso Nano Series Class-D Digital 4-Channel Amplifier

• RMS Power: 100W x 4 @ 4 ohms, 130W x 4 @ 2 ohms, 260W x 2 @ 4 ohms Bridged
• Total Peak Power: 520W
• Dimensions: 4.75"W x 9"L x 2"H

23
Soundstream PN4.520D

520W Picasso Nano Series Class-D Digital 4-Channel Amplifier

In stock

$229.99 (44.78% off)
$126.99

Item Added to Cart

PN4.520D small

520W Picasso Nano Series Class-D Digital 4-Channel Amplifier

$126.99

Keep Shopping

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$39.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream PN4.520D.
Soundstream ST4.1200D

1200W Max (600W RMS) Micro-Footprint, Stealth Series Class-D 4-Channel 2 Ohm Stable Amplifier

ST4.1200D main
Go to item page

1200W Max (600W RMS) Micro-Footprint, Stealth Series Class-D 4-Channel 2 Ohm Stable Amplifier

• 100 Watts RMS x 4 @ 4 ohms
• 150 Watts RMS x 4 @ 2 ohms
• 300 Watts RMS x 2 @ 4 ohms, bridged
• Total Peak Power: 1200 Watts
• High and low pass filters
• Small Footprint Makes for Easy Installation
• Aluminum Heatsink
• 3" W x 7.75" L x 1.5" H

Soundstream ST4.1200D

1200W Max (600W RMS) Micro-Footprint, Stealth Series Class-D 4-Channel 2 Ohm Stable Amplifier

In stock

$179.99 (14.45% off)
$153.99
Hide info
More info Item page
1 Special offer
  • Save 25% on an 8 Gauge Amp Kit with Purchase!

Item Added to Cart

ST4.1200D small

1200W Max (600W RMS) Micro-Footprint, Stealth Series Class-D 4-Channel 2 Ohm Stable Amplifier

$153.99

Keep Shopping

FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add
NVX XIV45 4-Channel RCA Audio Interconnect Cable

5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$23.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream ST4.1200D.
Soundstream PN1.1000D

1000W Monoblock Picasso Nano Series Class D Amplifier

PN1.1000D main
Go to item page

1000W Monoblock Picasso Nano Series Class D Amplifier

• RMS: 350W x 1 @ 4 ohms, 600Wx 1 @ 2 ohms
• Total Power: 1000W
• Pulse Width Modulated MOSFET power supply
• 4.75 W x 10.25 L x 1.50 H

4
Soundstream PN1.1000D

1000W Monoblock Picasso Nano Series Class D Amplifier

In stock

Only 3 Left!

$259.99 (28.85% off)
$184.99

Item Added to Cart

PN1.1000D small

1000W Monoblock Picasso Nano Series Class D Amplifier

$184.99

Keep Shopping

Belva 1.0 Farad Capacitor + Amp Kit

BB1D 1.0 Farad Capacitor + BAK42BK Complete 4 Gauge Amplifier Wiring Kit

$54.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream PN1.1000D.
Soundstream PN1.650D

650W Monoblock Picasso Nano Class-D Amplifier

PN1.650D main
Go to item page

650W Monoblock Picasso Nano Class-D Amplifier

• RMS Power: 400W x 1 @ 4 ohms, 650W x 1 @ 2 ohms
• Total Peak Power: 650W
• Dash Mount Remote Bass Level Control Included
• Dimensions: 4.75"W x 9"L x 2"H

15
Soundstream PN1.650D

650W Monoblock Picasso Nano Class-D Amplifier

In stock

$219.99 (45.00% off)
$120.99
Hide info
More info Item page
3 Special offers
  • Don't Forget an Install Kit with Your Amplifier Purchase!
  • Add a 4 Gauge Installation Kit to Your Purchase!
  • Add a Wiring Kit and Capacitor with Amp Purchase!

Item Added to Cart

PN1.650D small

650W Monoblock Picasso Nano Class-D Amplifier

$120.99

Keep Shopping

Belva BAK42BK 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$29.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream PN1.650D.
Soundstream ST1.1000D

1000W Max (500W RMS) Stealth Series Class-D Monoblock 2 Ohm Stable Amplifier with Bass Knob Included

ST1.1000D main
Go to item page

1000W Max (500W RMS) Stealth Series Class-D Monoblock 2 Ohm Stable Amplifier with Bass Knob Included

• 350 Watts RMS x 1 @ 4 ohms
• 500 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 1000 Watts
• Low Pass and Subsonic Filters
• 0 - 18 dB Bass Boost
• Small Footprint Makes for Easy Installation
• Aluminum Heatsink
• 3" W x 7.75" L x 1.5" H

Soundstream ST1.1000D

1000W Max (500W RMS) Stealth Series Class-D Monoblock 2 Ohm Stable Amplifier with Bass Knob Included

In stock

$179.99 (21.11% off)
$141.99
Hide info
More info Item page
1 Special offer
  • 25% off a 1/0 Gauge Amp Kit with Select Amplifier Purchase!

Item Added to Cart

ST1.1000D small

1000W Max (500W RMS) Stealth Series Class-D Monoblock 2 Ohm Stable Amplifier with Bass Knob Included

$141.99

Keep Shopping

Stinger SK46101

10 AWG Amplifier Power & Signal Installation Kit

$30.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream ST1.1000D.
Soundstream ST3.1000D

1000W Max (500W RMS) Stealth Series 2-ohm Stable 3 Channel Class-D Amp, Remote Level Knob Included

ST3.1000D main
Go to item page

1000W Max (500W RMS) Stealth Series 2-ohm Stable 3 Channel Class-D Amp, Remote Level Knob Included

• 65 Watts RMS x 2, 100W sub @ 4 ohms
• 100 Watts RMS x 2, 300W sub @ 2 ohms
• 200 Watts RMS x 1, 300W sub @ 4 ohms Bridged
• Total Peak Power: 1000 Watts
• High Pass, Low Pass and Subsonic Filters
• Small Footprint to Mount Anywhere
• Aluminum Heatsink
• Dimensions: 7.75" W x 3" L x 1.5" H

Soundstream ST3.1000D

1000W Max (500W RMS) Stealth Series 2-ohm Stable 3 Channel Class-D Amp, Remote Level Knob Included

In stock

$179.99 (20.00% off)
$143.99
Hide info
More info Item page
2 Special offers
  • Save 20% off a 8-pack 8 gauge ferrule with heat shrink
  • Save 25% on an 4 Gauge Amp Kit with Purchase!

Item Added to Cart

ST3.1000D small

1000W Max (500W RMS) Stealth Series 2-ohm Stable 3 Channel Class-D Amp, Remote Level Knob Included

$143.99

Keep Shopping

Belva BAK84

Complete 8 Gauge Amplifier Wiring Kit with 4-Channel RCA Interconnects

$29.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

$28.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream ST3.1000D.
Soundstream Rubicon Nano RN4.1400D

1400 Watt Peak (700W RMS) Rubicon Nano Series 4-Channel Full-Range Amplifier

RN4.1400D main
Go to item page

1400 Watt Peak (700W RMS) Rubicon Nano Series 4-Channel Full-Range Amplifier

• 125 Watts RMS x 4 @ 4 ohms
• 175 Watts RMS x 4 @ 2 ohms
• Total Peak Power: 1400 Watts
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty hybrid aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 6.5"W x 9"L x 1.5"H

5
Soundstream Rubicon Nano RN4.1400D

1400 Watt Peak (700W RMS) Rubicon Nano Series 4-Channel Full-Range Amplifier

OUT OF STOCK

$239.99 (26.67% off)
$175.99

Item Added to Cart

RN4.1400D small

1400 Watt Peak (700W RMS) Rubicon Nano Series 4-Channel Full-Range Amplifier

$175.99

Keep Shopping

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$39.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream Rubicon Nano RN4.1400D.
Soundstream AR1.4500D

4500W Peak (2200W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob

AR1.4500D main
Go to item page

4500W Peak (2200W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob

• 900 Watts RMS x 1 @ 4 ohms
• 1,100 Watts RMS x 1 @ 2 ohms
• 2,200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 4,500 Watts
• Built-in Low Pass and Subsonic Filters
• 0-12dB Bass Boost
• Aluminum Heatsink
• Dimensions: 8.5" W x 13.75" L x 2.125" H

6
Soundstream AR1.4500D

4500W Peak (2200W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob

OUT OF STOCK

$204.99 (18.05% off)
$167.99

Item Added to Cart

AR1.4500D small

4500W Peak (2200W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier with Bass Knob

$167.99

Keep Shopping

FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add
AudioControl Epicenter-InDash

If you want the best bass possible and a way to measure how loud your system is playing

$249.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream AR1.4500D.
Soundstream MR5.2000D

2000 W Peak (1000W RMS) Class D 5-Channel Marine Amplifier

MR5.2000D main
Go to item page

2000 W Peak (1000W RMS) Class D 5-Channel Marine Amplifier

• 75 Watts RMS x 4 @ 4 ohms + 500 watts x 1
• 100 Watts RMS x 4 @ 2 ohms + 400 x 1
• Bridged: 200 Watts RMS x 2 @ 4 ohm + 600 x 1
• Total Peak Power: 2000 Watts
• Variable Bass Boost: 0 to +12 dB bass boost
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation

3
Soundstream MR5.2000D

2000 W Peak (1000W RMS) Class D 5-Channel Marine Amplifier

OUT OF STOCK

$399.99 (37.50% off)
$249.99

Item Added to Cart

MR5.2000D small

2000 W Peak (1000W RMS) Class D 5-Channel Marine Amplifier

$249.99

Keep Shopping

Belva BAK46 6-Channel 4 Gauge Amplifier Installation Kit

Complete 6-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XIV65 V-Series Interconnect Cable

5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable

$34.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream MR5.2000D.
Soundstream AR1.2500D

2,500W Peak (1,600W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier

AR1.2500D main
Go to item page

2,500W Peak (1,600W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier

• 1,220 Watts RMS x 1 @ 4 ohms
• 1,400 Watts RMS x 1 @ 2 ohms
• 1,660 Watts RMS x 1 @ 1 ohm
• Total Peak Power: ,2,500 Watts
• Bass Boost
• Aluminum Heatsink
• 8.5" W x 12.75" L x 2" H

3
Soundstream AR1.2500D

2,500W Peak (1,600W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier

OUT OF STOCK

$164.99 (24.24% off)
$124.99

Item Added to Cart

AR1.2500D small

2,500W Peak (1,600W RMS) Arachnid Series Class-D Monoblock 1-Ohm Stable Amplifier

$124.99

Keep Shopping

Belva 1.0 Farad Capacitor + Amp Kit

BB1D 1.0 Farad Capacitor + BAK42BK Complete 4 Gauge Amplifier Wiring Kit

$54.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XLCA2

2 Channel Line Out Converter with xBOOST & 3-year warranty*!

$89.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream AR1.2500D.
Soundstream PN4.1000D

1000W 4-Channel Picasso Nano Series Class D Amplifier

PN4.1000D main
Go to item page

1000W 4-Channel Picasso Nano Series Class D Amplifier

• RMS: 140W x 4 @ 4 ohms, 250W x 4 @ 2 ohms, Bridged 250W x 2 @ 4 ohms
• Total Power: 1000W
• Pulse Width Modulated MOSFET power supply
• 4.75 W x 10.25 L x 1.50 H

5
Soundstream PN4.1000D

1000W 4-Channel Picasso Nano Series Class D Amplifier

OUT OF STOCK

$274.99 (32.36% off)
$185.99

Item Added to Cart

PN4.1000D small

1000W 4-Channel Picasso Nano Series Class D Amplifier

$185.99

Keep Shopping

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$39.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream PN4.1000D.
Soundstream T1.6000DL

6,000W Tarantula Series Mono Block Class D Car Amplifier

T1.6000DL main
Go to item page

6,000W Tarantula Series Mono Block Class D Car Amplifier

• RMS: 800W x 1 @ 4 ohms, 1400W x 1 @ 2 ohms, 2500W x 1 @ 1 ohm, 3000W x 1 @ 0.5 ohms
• Total Peak Power: 6000W
• Dash Mount Gain Control Module Included
• Multi-color RGB LED Illumination Accent Lighting
• DataLink for Strapping Two Amps for Double Power
• 9"W x 20.50"L x 2.5"H

15
Soundstream T1.6000DL

6,000W Tarantula Series Mono Block Class D Car Amplifier

OUT OF STOCK

$629.99 (41.27% off)
$369.99

Item Added to Cart

T1.6000DL small

6,000W Tarantula Series Mono Block Class D Car Amplifier

$369.99

Keep Shopping

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!

$129.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$16.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream T1.6000DL.
Soundstream T1.4000DL

4000W Tarantula Electro Series Mono-Block Class D Car Amplifier

T1.4000DL main
Go to item page

4000W Tarantula Electro Series Mono-Block Class D Car Amplifier

• RMS: 700W x 1 @ 4 ohms, 1300W x 1 @ 2 ohms, 2000W x 1 @ 1 ohm
• Total Peak Power: 4000W
• Dash Mount Gain Control Module Included
• Multi-color RGB LED Illumination Accent Lighting
• DataLink for Strapping Two Amps for Double Power
• 9"W x 18"L x 2.5"H

14
Soundstream T1.4000DL

4000W Tarantula Electro Series Mono-Block Class D Car Amplifier

OUT OF STOCK

$459.99 (43.48% off)
$259.99

Item Added to Cart

T1.4000DL small

4000W Tarantula Electro Series Mono-Block Class D Car Amplifier

$259.99

Keep Shopping

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!

$129.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

$16.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Soundstream T1.4000DL.

Related Categories


Soundstream Amplifier Wiring Kits Soundstream Amplifier Wiring Kits

Get all the cables, wires, and hardware you need to install your new car audio amplifier with one of these power amp kits.

Soundstream Capacitors Soundstream Capacitors

Car audio capacitors are a great addition to any aftermarket audio system that is in need of a little extra power. We have caps from 1.0 farad up to 100 farad!

Soundstream EQs, Signal & Sound Processors Soundstream EQs, Signal & Sound Processors

Find a quality line output converter, digital sound processor, EQ, crossover or bass enhancer in here.

Soundstream Marine Amplifiers Soundstream Marine Amplifiers

Enhance the sound on your boat by adding an amplifier to your marine audio system. These marine amps are the perfect way to get louder, bigger, and clearer sound quality on your boat. These marine amplifiers can be great for standard boat speakers, tower speakers, and even some marine PA systems. Each amp is specially treated and engineered to function in the same wet, salty environment that boats are in.

Soundstream Motorcycle Amplifiers Soundstream Motorcycle Amplifiers

Your motorcycle will sound better than ever with the proper amplifier. Most of these amps are specially designed with special materials that can withstand the vibrations and elemental exposure, while others are designed with an extremely small footprint to fit conveniently in a saddlebag or other tight installations. Many of the products in this category are specifically designed for certain motorcycles, making installation a breeze.

Soundstream Class-D Amplifiers Information

Soundstream Class-D amplifiers include efficient, Class-D circuitry. This circuit makes the most out of the limited power available from your car’s electrical system keeping your amp cool. Check out the amazing audio signal and power of the Soundstream Class-D amplifiers.
    clear all items