NVX VSW104v2 (VSW104 v2)
500W RMS 10" VS-Series Version 2 Dual 4-ohm Car Subwoofer
Quantity: 2
General Features:
- 10" VS-Series Version 2 Dual 4-ohm Car Subwoofer
- Power Handling:
- RMS: 350 - 500 watts
- Recommended power range: 175 - 500 RMS
- Aluminum Shorting Ring to prevent rises in inductance
- Non Pressed Paper cone
- High Roll Custom Blended Foam surround
- Stamped Steel basket
- 60oz Y30 High Energy Ferrite Magnet
- Impedance: Dual 4 Ohm
- Mounting depth: 5.00" (127 mm)
- Cutout diameter: 9.15" (236 mm)
- Mounting Diameter: 9.65" (245 mm)
- Overall Diameter: 10.35" (263 mm)
- Frequency Response: 20 - 200 Hz
- Sensitivity: 87 dB (1W/M)
- Xmax: 11mm
- Fs: 30 Hz
- Sd: 33.00 cm²
- Resonance Frequency (Fs): 30 Hz
- Net Weight: 13.15 lbs (5.95 kg)
- Recommended Ported Enclosure: 0.70ft³
- Recommended Sealed Enclosure: 1.00ft³
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Priced Individually
Additional Information:
Why a 10" Subwoofer? Choosing the right subwoofer size can be a difficult decision to make. To help with your decision, you can check out our K-Base Article, that breaks down the difference in the sound generated by the four most common subwoofer sizes. Click Here to read about The Differences In Subwoofer Sizes.
Check out the NVX VS-Series User Manual
Hifonics HFi1000.1D
1000 Watt RMS Class D Monoblock HFi Series 1-Ohm Stable Subwoofer Amplifier
Quantity: 1
|
General Features:
- HFi Series Single Channel Monoblock Class D Car Amplifier
- RMS Power Rating:
- 4 ohm: 475 watts x 1 chan.
- 2 ohm: 750 watts x 1 chan.
- 1 ohm: 1000 watts x 1 chan.
- Pulse Width Modulated (PWM) MOSFET power supply
- LED power (green) and protect (red) indicators
- Wired HFR-3 remote bass level control included
- Blue illuminated Hifonics badge
- Soft start sound function
- Preamp RCA outputs to daisy chain multiple amps
- 4-Way System Protection circuitry (thermal, overload, DC, and speaker short protection)
- Dual 12 gauge speaker output terminals simplify hookup
- Heavy duty aluminum alloy vented heatsink for maximum heat dissipation
- Silver nickle-plated RCA level inputs
- Silver nickle-plated screw terminals
- Four corner mounting ear tabs
- Input sensitivity: 200mV - 6V
- Frequency Response: 15 - 250 Hz
- THD and Noise: <0.1
- Signal to Noise Ration: >95 dB
- Damping factor: >200
- Variable low-pass filter: 30 - 250 Hz, 24 dB/octave
- Subsonic filter: 15 - 35 Hz
- Variable Bass Boost: 0 to +10 dB bass boost at 45 Hz
- Fuse Rating: 80A x 1
- 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
- Dimensions: 13-1/2"L x 8-13/16"W x 2-7/16"H
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Belva BAK42BL (Blue)
Primary Color: Blue - Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Cable (CCA Wiring)
Quantity: 1
General Features:
- Complete 4 Gauge 2-Channel Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts RMS
- Premium Powerflex power and ground wire provides optimal power transfer
- Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
- Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper
- Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
- In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
- Also available as 4-Channel Kit
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Kit includes:
- 17 ft. (5.2 meters) Blue 4 gauge power wire
- 3 ft. (.91 meters) Black 4 gauge ground wire
- 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
- 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
- 20 ft. (6.1 meters) Speaker cable
- One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
- One Black rubber firewall grommet
- One 4 Gauge Blue chrome plated ring terminals
- One 4 Gauge Black chrome plated ring terminal
- Three 18 Gauge Blue Spade terminal
- Two 18 Gauge Black Spade terminal
- One 18 Gauge Red butt connector
- Ten 4" Black zip ties
