See all parts that fit your 2020 Ranger
800W Max (400W RMS) 12" Punch P2 Dual 2-ohm Subwoofer with Sealed Enclosure and Speaker Wire
• 12" Dual 2 ohm Subwoofer with vented enclosure and speaker wire
• 800W Peak
• 400W RMS
• Kevlar Fiber Reinforced Paper Cone
• VAST Surround
• Dual Linear Spiders
• Woven Tinsel Leads
• CEA-2031 Compliant
• Flex-Fit Basket

When it comes to car subwoofers, Rockford Fosgate raised the bar in terms of high quality affordable subwoofers. These Punch Stage 2 subwoofers are the perfect combination of price and deep bass. The new Punch Stage 2 series will crank out 400 watts of RMS power handling, giving you that nice deep bass without over powering your audio system. The face of the woofer has been upgraded with a kevlar reinforced paper cone that will provide durability and great sound quality. For those long sessions of hard hitting bass, the rubber surround has been manufactured to handle high excursion movements through out the day. With their patented technology the Rockford Fosgate P2D2-12 are the perfect match for those looking for quality bass without breaking the bank.
While built on a long standing history of performance, the punch series woofers can deliver not only output to satisfy you when you want it loud but maintain a level of sound quality for when you really want to "listen" to your music. Taking many design cues from the Power Series, Rockford Fosgate engineers continue to improve the Punch Series year after year making it one of the most sought after woofer lines for music and bass enthusiasts alike. With features like Dual tear & fatigue resistant poly-cotton spider for high strength and anodized aluminum voice coil formers to handle heat buildup in the motor structure under full power situations, these drivers are designed to perform.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Rockford Fosgate Punch P2 P2D2-12
800W Peak (400W RMS) 12" Punch Series Dual 2-ohm Car Subwoofer
Quantity: 1
Priced Individually
1.5 Cu Ft - Single 12" Sealed MDF Subwoofer Enclosure (Belva MDFS1215)
12-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (1.5 cu ft airspace)
Quantity: 1
Best selling similar products
Manufacturer:
Model Number:
P2D2-12_MDFS1215
Weight:
39.25lbs
Internal SKU:
p2d212_mdfs1215
Internal Product ID:
126667
Giveaway
At the price they are asking,($40 shipped), this is a no-brainer. You'd be very hard pressed to buy the MDF used in this enclosure for the price they are selling the complete box for. Its true 3/4", ( I laid a caliper to it to check), and its advertised dimensions and airspace are spot on.
135 found this helpful
Great bass
Bought this for an old punch 2 I had sitting around that I put into my sons car. Previously it was in a small truck box for an s10. Couldn't believe the difference that this box made. The sub is getting 200 watts from the little fosgate amp that I had for it but it is twice as loud as it was in my truck with no distortion. Obviously I had it in way to small of a box before. I got one happy kid though.
130 found this helpful
solid box
Solid box had one screw that didn't grab anything must of hit a soft spot in the wood other then that solid box
129 found this helpful
A winner
This is just what the woofer doc ordered. The poly fill is already installed. The black carpet looks great. I'm installing a Rockford T-1 dual 4 ohm 12 in the box. I'm anxious to hear how this is gonna sound in my Mark VIII.
129 found this helpful
Exactly what I needed.
I purchased this box to house an Alpine type E sub. I had originally intended on building my own box, but after looking around at the prices of MDF, I found this box, I literally couldn't purchase the materials cheaper than buying this. It's sturdy, and is a perfect match for my sub. I am extremely pleased with my purchase, and would recommend it to anyone looking for a very well built, sealed, enclosure.
123 found this helpful
Good box!
For a pre built box it does the job very well! The poly fill is useless if you need a bigger box just order a bigger box... No leaks what so ever. I did replace it for a custom built ported box.
123 found this helpful
Great price
I'm running a rockford fosgate p2 in it. This box has held up great. i can hear a very small leak but only when I was checking for leaks. Otherwise it was inaudible from even a few feet away. Being 100% sealed is very crucial considering it is a sealed box. But overall id say that this is a great box. Cant beat the price. Nothing a little silicon cant fix.
120 found this helpful
SEALED ENCLOSURE
Yes its a prefab box, it is constructed very well with .75" MDF. Solid no leaks.Carpet well done.Looks nice. Just match the air space you want for your sub and your done. I could not build this for the price i paid, so its a no brainer for me. If i was looking for ported or vented i would build one myself because of propper tunning. Just wanted something simple and this exceeded my expectations.
121 found this helpful
Awesome price and fast shipping
Very nice for the money. You can't go wrong with this box. Very nice craftsmanship. Does not come pre-wired though. More than enough poly fill though and very durable carpet.
120 found this helpful
Nice Touch!!!
This box has bundled with the NVX 12" VSW sub and it does some good bass! Well crafted, quality carpet, more than enough polylester. It doesn't come pre-wired though, but since it was a free bundle... I could careless!
118 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.