900W Peak (300W RMS) 6x9" Mobile Monitor Series 3-way 4-ohm Coaxial Car & Marine Speakers with Dual Tweeters
• 450 watts Peak Each, 150 watts RMS Each
• 1" and 3/4" dual Terylene Dome tweeters
• Titanium Coated Composite cone material
• Impedance: 4 ohms
• Sensitivity: 94 dB
• 450 watts Peak Each, 150 watts RMS Each
• 1" and 3/4" dual Terylene Dome tweeters
• Titanium Coated Composite cone material
• Impedance: 4 ohms
• Sensitivity: 94 dB
|
Polk MM1 Series Speakers |
|---|
It doesn't matter whether your next destination is the road, the lake, the trails or the dunes. Polk's MM1 series speakers are built to not only withstand whatever environment they're thrown into, but to make your ears happy through all of it.
Polk's Mobile Monitor speakers are rugged and built for all kinds of outdoor settings. The IP56 ultra marine certification means all parts - the surround, the cone, the basket and everything else - can withstand dirt, dust and water without any serious side effects. They're ready for your boat, ATV or anything else designed for exposure to the elements. Add in a non-corrosive fiberglass reinforced ABS basket, and these MM1s are ready for the long haul.
Not looking for outdoor adventure? These MM1 speakers are still built to outperform your factory drivers in your daily vehicle. Check out that crossover built onto the speaker. While two- or three-way speakers have crossovers mounted on, they're not usually this robust. Add a pivoting 1" tweeter to customize your sound, oversized voice coils and more, and your next drive will sound a whole lot better. Built-in Dynamic Balance Technology helps eradicate distortion and enrich the tone.
Don't put off that sound upgrade any longer. Polk's MM1 series offers a simple solution with anything-but-simple sound. Drop a pair of these in your cart and be prepared for your next adventure.
Priced Per Pair
Polk Audio MM692 owner’s manual
|
(newest, current model)
|
|
(previous model, replaced by Polk Audio MM692 (MM 692))
|
|
(previous model, replaced by Polk Audio MM691)
|
Internal Product ID:
133885
| 5 star |
|
83% |
| 4 star |
|
17% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Excellent Product
I have run these in the rear deck of my Altima for over a year. They have what it takes. Solid sound with lots of power and no distortion. I would highly recommend them.
56
found this helpful.Super Value Marine Speakers
Great volume and warmth. Handles 150 watts each, and will take a beating.
Verified purchase
56
found this helpful.Polk Audio MM692 - MM1 Series 6x9" Coaxial Speakers
These speakers are fantastic! SUPER crisp and clear with a 300 watt amp. Replaced the existing tower speakers on my Malibu with these and boy am I glad I did. Thoroughly impressed :)
Verified purchase
54
found this helpful.Polk Audio MM692 - MM1 Series 6x9" Coaxial Speakers
The MM series are not your standard speaker. I have used the majority of your name brand speakers, Alpine, JL audio, Focal, Infinity, etc... I have to say the Polk MM series are a quality sound at a bargin price. They are well worth the money and sound like a much more expensive speaker. They love power and do not distort.
Verified purchase
54
found this helpful.Polk Audio MM692 - MM1 Series 6x9" Coaxial Speakers
Nice speakers but they didn't work for my application. I would pair them with the 6.5" version.
51
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
This product is temporarily out of stock. May we recommend...
• 450 watts Peak Each, 150 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 92 dB
$103.96
• 240 watts Peak Each, 80 watts RMS Each
• 1" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 91 dB
$64.99
• 150 watts Peak Each, 75 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome Tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 91 dB
$99.99
• 360 watts Peak Each, 90 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 92 dB
$89.96
• 150 watts Peak Each, 75 watts RMS Each
• 1/2" PEI (Polyetherimide) Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohms
• Sensitivity: 91 dB
$109.99
• 125 watts RMS Each
• 3/4" Silk Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohms
• Sensitivity: 96 dB
$279.99
• 200 watts Peak Each, 100 watts RMS Each
• Dual 1" Aluminum Dome tweeters
• Polypropylene-Carbon Fiber Hybrid cone material
• Impedance: 4 ohms
• Sensitivity: 91 dB
$159.99
• 130 watts Peak Each, 65 watts RMS Each
• 1/2" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
$74.95
• 400 watts Peak Each, 75 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Graphite-injected Reinforced Spun cone material
• Impedance: 4 ohms
• Sensitivity: 93 dB
$64.99
• 300 watts Peak Each, 100 watts RMS Each
• 1" Soft Dome tweeters
• Polypropylene cone material
• Impedance: 2.3 ohms
• Sensitivity: 94 dB
$89.99
