Install new car stereo and retain accessory power in select 1997-2004 Chevrolet Corvette
Product highlights
• Provides 12-Volt accessory power (RAP)
• Designed for amplified audio systems
• Retains balance and fade
• Micro-B USB Updatable
The Metra XSVI-2004 is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio. The R.A.P. (Retained Accessory Power) function, where power is supplied to the radio after the ignition is shut off until one of the doors are opened, is retained by the XSVI-2004. The XSVI-2004 will also retain the amplified door woofers through the use of a differential line converter. This helps eliminate turn on/off pops and allows the user to adjust the level of the door woofers.
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Internal Product ID:
14599
| 5 star |
|
92% |
| 4 star |
|
8% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Worked Great
This is the only product that works on the Chevrolet Corvette. After having to spend hours rewiring previous cars I decided to buy this Axxess piece. What a great product. Cut my install time by hours and it worked perfectly.
21
found this helpful.Great Product - Poor documentation
This is a great product and works very well. Basically plug-and-play for the Corvette. The installation instructions were minimal at best. The install ended up being easy, but I had to get additional information from on-line audio forums and Axxess customer service to figure where each wire matched to the new H/U.
22
found this helpful.Easy to use, works well
Replaced a Soundgate adapter with this when the Soundgate died after about 5 years. The bass from the Bose woofers seems to be improved, and the "Retained Accessory Power" feature (which the Soundgate didn't have) is nice.
22
found this helpful.Great
works great easy to install. Wasn't sure what I was getting into as far as installation but it was just as simple as plugging it into the aftermarket harness
20
found this helpful.Good Product
I installed this product in my 2004 Corvette and works great.
20
found this helpful.the converter worked perfect
The Axxess XSVI-2004 worked perfectly in my 2004 corvette changed the stock stereo to an alpine and the converter worked perfectly with the bose system. The local stereo company tried to talk me in to changing my hole system over (1,000.00 )saying that there would be popping and static using the converter. THERE WASNT - IT WORKED PERFECT worked better than the stock stereo
19
found this helpful.XSVI-2004 - fixes anti-theft issue
Fixes anti-theft issue that disables the car!! Install took 45min 1 1/2 hr, overall easy to install after taking the bottom half of the steering components.
18
found this helpful.2002 Corvette
This product works great. I was able to connect a Kenwood system and still use the original speakers and subwoofer.
19
found this helpful.RED FOX
This was required to connect the Jensen 9414 radio to my Bose sound system. Easy to connect and works flawlessly.
19
found this helpful.Almost Perfect
Only a few small items. The antenna does not work properly with this unit as I assume the antenna is controlled by the data bus. With the Axxess, the antenna is up all the time the radio is on, even when you are listening to the CD which in the factory configuration, the antenna would be down. Also the for potentiometers are not easy to adjust unless you have the special tool made for that purpose. Small knobs would be better.
14
found this helpful.This product is temporarily out of stock. May we recommend...
iDataLink ADS-MRR Maestro RR Interface Module
• Radio Replacement Interface with Steering wheel Control and Factory Amp Integration
• For Use w/ Select 2006-Up Vehicle Harnesses
• Assign Each Control a Secondary Function
• Program it Yourself with a Windows Based Computer
$159.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
$6.99
• Retains steering wheel controls, OnStar and Chimes
• Compatible with amplified audio systems
• Retains OEM Backup Camera
• iDatalink-ready radio
$269.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
$6.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
$6.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
$5.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
$13.99
Axxess TYTO-01 Wiring Interface
• Provides 12-Volt accessory power (RAP)
• Designed for amplified audio systems
• Retains balance and fade
• Micro-B USB Updatable
• Pre-Wired for ASWC-1 (Sold separately)
$79.99
Scosche TA02B Wiring Interface
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
$6.95
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
$9.99
