(2) KICKER 43C124 Comp 12" 600w Car Subwoofers+Amplifier+Amp Kit+Vented Sub Box

Built for Bass

You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.

You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.

	Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.

General Features:

• 12" Dual Ported Subwoofer Enclosure
• Blue high gloss front face board
• Covered in black carpet
• Durable 3/4" Medium Density Fiberboard (MDF) construction
• Subwoofer mounting depth: 14 1/2"
• Subwoofer cutout diameter: 11 1/4"
• Box volume: 1.85 cubic feet (per chamber)
• Total box volume: 3.7 cubic feet
• Dimensions: 16"D x 35"W x 16.25"H
• Also available in Black and Red
• Authorized Internet Dealer
• 30-Day Return Policy

Port Specifications:

• Rectangular Slot Port
• Number of ports: 2
• Port volume: 0.18 cubic feet (per port)
• Total port volume: 0.36 cubic feet
• Estimated port tuned frequency (fb): 35 Hz
• Port dimensions: 1.5"Width 12.5"Depth

Product Details:

• CX Series Class D 1 ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohm: 150 watts x 1 channel
• 2 ohm: 300 watts x 1 channel
• 1 ohm: 400 watts x 1 channel
• Total RMS power output: 400 watts
• Wired bass level remote control with optional Kicker 46CXARCT
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• 1 pair of pre-amp outputs
• Three-second turn-on/off delay to eliminate unwanted interference
• KickEQ 6dB variable bass boost for those additional low frequencies
• FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Vertical mounting hardware included for another unique look
• Input sensitivity:
• Low level: 125mV - 5 volts
• High level: 1 - 40 volts
• Frequency Response: 25 - 200 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ratio: >95 dB
• Variable low-pass filter: 50 - 200 Hz
• Subsonic filter: 0 - 25 Hz
• Variable Bass Boost: 0 - 6 dB
• Fuse Rating: 40A
• 8 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 8-1/8" L x 6-11/16" W x 2-5/16" H
• Authorized Internet Dealer
• 2 Year Manufacturer's Warranty
• MFR #: CXA400.1

General Features:

• 16 Gauge Speaker Wire
• High strand count for maximum flexibility
• Ultra-flexible PVC blended jacket for easy installation
• Packed in resealable bag
• Length: 7m (23 Ft)
• Also available in 12 Gauge
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• This Complete Eight Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable
• The best hardware, signal and power cable comes in one convenient package
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

What's in the Box?

• 17 ft 8 awg blue power wire
• 4 ft 8 awg gray ground wire
• Self tapping bolt and washer
• FHS fuse holder with 60 amp fuse L=3.06", W=1.33", H=1.32"
• 17 ft 16 gauge remote wire
• 16.4 ft KI RCAs
• 12 ft Q series 12 awg speaker wire
• 6x 6" zip ties
• 8 awg firewall grommet
• 1x 18-22 awg butt connector
• 4x 12 awg fork terminals
• 2x blue fork terminal boots
• 2x black fork terminal boots