800W Peak (400W RMS) 400W 15" 55 Series Dual 2 Ohm Subwoofer Package with Vented Enclosure
Product highlights
• 800W Peak
• 400W RMS
• Dual 2 ohm Voice Coil
• Polypropylene Cone
• Rubber Surround
• Spider Plateau Venting Mechanically Cools the Voice Coil
• Radial Ribbed T-Yoke Dissipates Heat and Decreases Distortion
The MTX Audio 55 Series subwoofers are the perfect solution for improving your car sound quality while taking up little space. Their low profile means they do not need a large enclosure and will still deliver powerful bass. How do they do this? With an improved surround compared to traditional Half-Roll surrounds, expanded surface area and reduced distortion due to progressive suspension controls. With over 40 years of audio experience, MTX Audio makes sure and knows how to create quality audio with their products, and the 55 Series is no exception!
The MTX Inverted Apex Surround increases the surface area of the sub to allow for more air movement, accurate bass reproduction and higher SPL. Traditional Half-Roll Surrounds have an inherent wrinkling when reproducing bass due to the physics of its motion, which causes distortion. The Inverted Apex Surround moves symmetrically through both positive and negative cycles which eliminates this type of distortion.
Progressive Suspension control the excursion of the subwoofer at high power levels which reduces distortion. Eliminating this 3rd order distortion means you can play your music loud and rely on your subwoofer to take of itself.
Two features really make sure the MTX subwoofers stay cool: the Spider Plateau Venting and the Radial Ribbed T-Yoke. The Spider Plateau Venting is a mechanical cooling process that targets cool air at the voice coil. This means the subwoofer cools itself as it is playing. The Radial Ribbed T-Yoke acts as a heat sink that dissipates heat and decreases distortion.
MTX 5515-22
800W Peak (400W RMS) 15" 55 Series Dual 2-ohm Car Subwoofer
Quantity: 1
Priced Individually
Atrend 15SQV
15" Single Pro Series Vented Subwoofer Enclosure
Quantity: 1
 |
 |
Belva BBSW167
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Quantity: 1
|
(newest, current model)
|
|
(previous model, replaced by MTX 5515-22 15" 800 Watt DVC 2-ohm Car Audio Subwoofer + Atrend 15SQV)
|
Manufacturer:
Model Number:
BBSW167,15SQV,5515-22
Weight:
57.90lbs
Internal SKU:
mtx-551522_15sqv_tc4sw1625
Internal Product ID:
158829
| 5 star |
|
84% |
| 4 star |
|
13% |
| 3 star |
|
0% |
| 2 star |
|
3% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
OK wire if you like red wire
I received this wire because when I bought my Image Dynamics speakers from Sonic the description said it included speaker wire in the box, but when I received them there was none. I called Sonic and they sent this wire to make up for the error. I later called Image Dynamics and found out that they no longer include speaker wire with their speakers so Sonic if you are reading this you can update your description and pictures on the ID speakers to NOT show speaker wire. For the record I bought the Image Dynamics CTX65cs and the CTX4 speaker sets. Great speakers by the way. Thanks Sonic for all your great products and sound advice, no pun intended:)
145
found this helpful.nice sound
very good product at a pretty good price lowest i could find on net and sounds good
115
found this helpful.Use to purchase this all the time
Belva brand is good affordable material when starting out but through out time cca corrodes if you have the money buy ofc cable
74
found this helpful.Great value
Great price and works fine I know pre fab boxes ARENT ideal but if you do go with one this is not a bad option
79
found this helpful.Good extra fine wire
This is excellent speaker wire. One wire has round insulation while the other has square insulation making it easy to identify hot and grounds. My only installation problem was I didn't order enough. I needed a quantity of 2 just to wire a single cab pickup.
61
found this helpful.Good wire
This wire is great speaker wire. I like the way it looks and works great.
56
found this helpful.Excellent value
The speaker wire is a good price for the length and gauge.
57
found this helpful.nice box
was a perfect match for my sub, the port works really well
Verified purchase
37
found this helpful.Good
Sounds great. Sub didn't fit perfect but hey. It's prefab. I simply made it fit.
Verified purchase
35
found this helpful.Hits hard, clean bass.
put this sw in a 3.75 port tuned to 33hz box. Very clean bass. Hard to find subs with these specs at this kind of price.
38
found this helpful.
25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)
20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)
Universal, Professional Heavy Duty Roller for Sound Damping/Dampening
Best selling similar products
Rockford Fosgate Punch P3-2X12
• Dual Punch P3 12" Loaded Subwoofer Enclosure
• 2400W Peak
• 1200W RMS
• Constructed with Durable 5/8" MDF
• High Current Binding Posts
• Durable Black Carpet Covering
• Computer Optimized Design
• 1 Ohm Final Impedance
$659.99
• Sealed enclosure with 1 12" Solo-Baric L7T Series Subwoofer
• 600 watts RMS ( Peak)
• Final Impedance: 2-ohm
• Dimensions: 21.5" L x 13.75" H x 7.75" W x 4.375" W2
$349.99
Kicker Solo-Baric DL7S122 (44DL7S122)
• 3000W Max Dual 12" Vented Subwoofer Enclosure
• 12" L7S Subwoofers
• Thick MDF Construction with Thick Black Carpet
• Spring-Loaded Binding Post Terminals
• Enclosure Dimensions: 16-3/8" TD x 19-9/16" BD x 32-3/8" W x 16" H
$639.96
