(2) MTX 5515-22 15" 1600w Subwoofers+Sealed Sub Box+Kicker Amplifier+Amp Kit

Product Details:

• 15" Dual Medium Sealed Subwoofer Enclosure
• Durable 3/4" Medium Density Fiberboard (MDF) construction
• Mitered edge construction provides cleaner finish
• Miter joints feature over 41% more surface area
• More surface area translates into a stronger bond
• Dado joints offer an 80% increase in surface area
• Built using trick glue for up to 3600 PSI holding ability
• Glued and braced with fasteners for added strength
• Premium black carpeted finish for sleek modern look
• Silver spring-loaded terminal push cups
• Maximum subwoofer mounting depth: 15.9"
• Subwoofer cutout diameter: 14"
• Box volume: 2.22 cubic feet (per chamber)
• Total box volume: 4.44 cubic feet
• Dimensions: 36" L x 16" H x 17" W
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• CX Series Class D 1 ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohm: 300 watts x 1 channel
• 2 ohm: 600 watts x 1 channel
• 1 ohm: 800 watts x 1 channel
• Total RMS power output: 800 watts
• Wired bass level remote control with optional Kicker 46CXARCT
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• 1 pair of pre-amp outputs
• Three-second turn-on/off delay to eliminate unwanted interference
• KickEQ 6dB variable bass boost for those additional low frequencies
• FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Small footprint for easier installation
• Accepts up to 40-volt input signal
• Vertical mounting hardware included for another unique look
• Input sensitivity:
• Low level: 125mV - 5 volts
• High level: 1 - 40 volts
• Frequency Response: 25 - 200 Hz
• Total Harmonic Distortion (THD): 1%
• Signal to Noise Ratio: >95 dB
• Variable low-pass filter: 50 - 200 Hz
• Subsonic filter: 0 - 25 Hz
• Variable Bass Boost: 0 - 6 dB
• Fuse Rating: 80A
• 4 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 8-1/8" L x 6-11/16" W x 2-5/16" H
• Authorized Internet Dealer
• 2 Year Manufacturer's Warranty
• MFR #: CXA800.1

Product Details:

• 4 Gauge 2-Channel Complete Amplifier Installation Kit
• Designed for car audio systems up to 1200 watts RMS
• Made from 100% Copper-Clad Aluminum (CCA)
• Satin chromed Mini-ANL fuse holder offers ideal protection for high-powered systems
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• RCA Interconnect Cable
• Twisted-pair construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Gray 4 gauge power wire
2. 3 ft. Black 4 gauge ground wire
3. 17 ft. Gray 18 gauge remote lead wire
4. 20 ft. 16 gauge speaker wire
5. One 17 ft. 2-channel twisted-par construction RCA interconnect Cable
6. One Mini-ANL Fuse Holder with 80 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 4 Gauge Chrome Plated ring terminals
9. Five 16 Gauge Spade terminal
10. One 18 Gauge Red butt connectors
11. Ten 4" Black zip ties

General Features:

• 16 Gauge Speaker Wire
• High strand count for maximum flexibility
• Ultra-flexible PVC blended jacket for easy installation
• Packed in resealable bag
• Length: 7m (23 Ft)
• Also available in 12 Gauge
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty