See all parts that fit your 1982 XJ6
Rockford Fosgate 600W Punch Single 10 Inch Shallow Subwoofer Enclosure (2 Pack)
• 300 Watts RMS
• 600 Watts Max
• Kevlar Fiber Semi-Pressed Paper Cone
• Compressed Sealed Poly-foam Surround
• ABS/Acrylic Dustcap Assembly
• 2.5" Voice Coil with spun-laced Nomex insulating collar
• 10 AWG compression speaker terminals
The P3S-1X10 sealed enclosure was designed specifically to fit in the space behind many regular truck cab seats. It comes preloaded with a single 10" Punch Stage 3 shallow dual voice coil subwoofer that can handle up to 300 watts RMS. The enclosure is wired to a low 1-ohm final impedance. It will drive your amp to its maximum. Just make sure you pair it with a 1-ohm stable amplifier. If you're looking to save or have minimal space, Rockford Fosgate's Punch PBR300X1 amp is a perfect match for this enclosure, generating 300 watts RMS at 1 ohm. The enclosure is constructed with 1/2" medium density fiberboard covered with heavy-duty black carpet.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Best selling similar products
Manufacturer:
Model Number:
P3S-1X10-2
Weight:
44.00lbs
Internal SKU:
p3s1x10_2
Internal Product ID:
166239
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.