Rockford Fosgate 11P3D212 (Open Box, Complete)

1200W Max (600W RMS) 12" Punch P3 Series Dual 2-Ohm Car Subwoofer (Newest Model)

highlight-star-icon

• 1200W Peak
• 600W RMS
• Anodized Aluminum Heat Sinking Cone
• Santoprene Vertical Attach Surround Technique
• 4-Layer 2-1/2" Voice Coil
• Proprietary Spider Venting

Learn more about the ls-11p3d212-obc8

We apologize

This item has been discontinued

Description


Rockford Fosgate

Authorized dealer




Taking Punch to a Higher Stage

Sonic Electronix is now carrying the brand new line of Rockford Fosgate Punch P3 Series Car Audio Subwoofers. The P3D2-12 Punch Series 12" Subwoofer has a peak power rating of 1200 watts and a RMS rating of 600 watts. This sub will produce some earth shaking bass and is constructed with an anodized aluminum cone and a vertical attach surround technique. This woofer is also equipped with a 2.5" Voice coil and a protective PVC textured magnet cover. Add some bumps in your trunk and enhance your cars stereo system with this Rockford Fosgate Punch Series Subwoofer.

While built on a long standing history of performance, the punch series woofers can deliver not only the output to satisfy you when you want it loud but maintain a level of sound quality for when you really want to "listen" to your music. Taking many design cues from the Power Series, Rockford Fosgate engineers continue to improve the Punch Series year after year making it one of the most sought after woofer lines for music and bass enthusiasts alike. With features like Dual tear & fatigue resistant poly-cotton spider for high strength and anodized aluminum voice coil formers to handle heat buildup in the motor structure under full power situations, these drivers are designed to perform.





Anodized Aluminum Voice Coil Former

Anodized Aluminum Voice Coil Former

By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

 
CEA-2031 Rockford Fosgate Subwoofers

Conforms to CEA-2031

Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.

 
Rockford Fosgate Stitched Tinsel Leads

Stitched Tinsel Leads

To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.

 
Rockford Fosgate VAST Surround

VAST: Vertical Attach Surround Technique

In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.





 

Key Benefits

  • 12" Dual 2 ohm Punch Stage 3 Subwoofer
  • Power Handling:
    • Peak: 1200 watts
    • RMS: 600 watts
  • Recommended power range: 300 - 700 watts RMS
  • CEA-2031 Compliant
  • Klippel Verified
  • Flex-fit Mounting pattern
  • Proprietary spider venting/cooling technique
  • StampCast basket with integrated spider venting
  • Sturdy 16 gauge compound bend frame geometry
  • High modulus Kevlar re-inforced paper-pulp cone
  • Semi-flexible, PVC removable protective motor cover
  • Multi-point high-temp/high-strength neck joint bonding technique
  • Tall-profile VAST Santoprene surround for larger surface area
  • Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
  • Fatigue resistant and reduced strain "stitched on" flexible lead wire design
  • Proprietary all metal, radially oriented compression input terminal assembly
  • Optimized motor magnetics with extended pole and bumped vented backplate
  • High temp 2.5" voice coil w/ spun-laced Nomex insulating re-inforcement collar
  • Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill
  • Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-12

  •  
  • Mounting Depth: 6.66"
  • Cutout Diameter: 11.25"
  • Magnet Weight: 96 oz
  • Frequency Response: 26.5 - 250 Hz
  • Xmax: 15.2mm
  • Sensitivity: 85 dB @ 1 watt / 1 meter
  • Recommended Ported Enclosure: 1.79ft³
  • Recommended Sealed Enclosure: 1.02ft³
  • Matching Amplifiers: (one subwoofer)
  • Matching Amplifier: (two subwoofers)
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

  • Priced Individually

Check out the Rockford Fosgate P3 Series Owner's Manual

Tips for Installing the P3D2-12 Subwoofer


Subwoofer Wiring Guide


Item Details


Manufacturer:

Model Number:

11p3d212

Weight:

21.50lbs

Internal SKU:

ls-11p3d212-obc8

Internal Product ID:

171331

Customer Ratings & Reviews



5 star
85%
4 star
12%
3 star
2%
2 star
0%
1 star
2%



Durability
4.8
Value
4.9
Features
4.8
Design
4.9
Usability
4.8

Customer Photos & Videos


Customer Reviews

Sort by:

Loading...

Great Subwoofer

The following review is for P3D2-12, which is a part of the bundle you are viewing.

Hi all,

I bought a used older model of the P3 but instead was sent the brand new Punch P3D212! So anyways, I have this in a 2.2-2.3 net cubic foot box tuned to about 30 hz and this thing slams in the 35-40hz range. It just goes bananas and sounds great as long as the amp you are using is clean. If this is one of your choices for a subwoofer, you will not be disappointed, however I know this isn't the best subwoofer ever.

The ONLY thing I would look for is that the glue connecting the spider to the cone began to crack, causing a rattle in the subwoofer, but I put some CA glue as well as GOOP around that area and all is well now.

By 1989 Civic on January 31, 2014

48

found this helpful.

Bumpin

The following review is for P3D2-12, which is a part of the bundle you are viewing.

My friends all have two twelves in their car, but i just have one of these in a ported box and they dont even compAre to mine.

By logan on January 29, 2014

41

found this helpful.

RF P3's Rock!

The following review is for P3D2-12, which is a part of the bundle you are viewing.

I have 4 of these bad boys in a sealed box hooked up to a t1500bdcp and they get down literally good job Sonic Electronix

By Tyrell on March 9, 2013

39

found this helpful.

P3s are Loud!

The following review is for P3D2-12, which is a part of the bundle you are viewing.

These subs are loud for only having 500 watts rms slamming into them. I have these in a 1.85 cf box with a slotted port tuned to 35hz. I can get any drink any size that's in my cup holder to dance around quite nicely.

By Gary on August 17, 2014

37

found this helpful.

Absolutely amazing sub !!!

The following review is for P3D2-12, which is a part of the bundle you are viewing.

This sub is great it hits extremely hard and thanks to sonic electronix I got it at a great price this sub is just overall a great product the sound quality is amazing to I would definetly recommend this sub to anyone I have a Brutus hifonics 1200 watt amp hooked up to it hits harder than most people's two subs

By Rooter on January 8, 2015

36

found this helpful.

best boom for the price

The following review is for P3D2-12, which is a part of the bundle you are viewing.

Great sound quality these make my rearview mirror useless would recomend these to anyone just make sure you get a good box my two 12 blew the seals on my ported box.

By Ryan on March 3, 2014

34

found this helpful.

Great!!

The following review is for P3D2-12, which is a part of the bundle you are viewing.

I had already had two 12's JBL in my car with a weak MTX amp and it was okay when i put my music all the day up. But these bad boys, they are so different, i have two 12's P3D2 and running on a rockford amp punch 1000bx1d something like that and everyone can hear it. I have to put it at -30 bass just to so my rear mirror wouldnt move. But overall great! I would check if the sub fits the box if you are trying to put it in an older box.

By Ken on November 24, 2013

33

found this helpful.

Pounds hard

The following review is for P3D2-12, which is a part of the bundle you are viewing.

Using with a power acoustic rz1-1500 and it pounds. Only running at 4 ohms and it's pounds harddd! Will be looking for another one for my truck soon.

By Bradley on July 16, 2014

33

found this helpful.

very please with rockford fosgate

The following review is for P3D2-12, which is a part of the bundle you are viewing.

Okay i have 4 d2 p3 12's in a 4.0 cubic ft seal box tune at 35hz and they are hook up to the t1500.1bdcp.and i got i got them at 1ohm and they are getting 1950 rms on a 1500 amp thats crazy so any one thats thinking of getting these babies get them and a cea amp so it do what it says and trust me u wont be disappointed

By rello on March 13, 2013

33

found this helpful.

Awesome

The following review is for P3D2-12, which is a part of the bundle you are viewing.

I have 2 of these in a custom built box paired with a hifonics brutus 1700w amp and could never be more satisfied. I have no complaints with this subwoofer. All I can say is these subs are a great buy for your money.

By Cameron on January 25, 2013

32

found this helpful.

Add-ons


Similar Products


Best selling similar products

NVX VCW124 Version 3 (VCW124v3)

• RMS Power: 1200 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

(114)

$189.99

Kicker CWR122 (48CWR122)

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Polypropylene Cone
• Santoprene Rubber Surround
• Impedance: Dual 2 ohms
• Mount depth: 5-3/4"
• Sensitivity: 86.9 dB

(2)

$127.96

Rockford Fosgate Punch P3D2-12

• 1200W Peak
• 600W RMS
• Anodized Aluminum Heat Sinking Cone
• Santoprene Vertical Attach Surround Technique
• 4-Layer 2-1/2" Voice Coil
• Proprietary Spider Venting

(65)

$219.99

NVX VSW124 Version 2 (VSW124v2)

• 600 Watts RMS / 1200 Watts Max
• Dual 4-ohm Voice Coil
• Non-Pressed Paper With Woven Carbon Fiber Top
• High Excursion Foam Surround
• Stamped Steel Basket
• Single Nomex Spider

(28)

$89.99

Earthquake Sound HoleeS 12

• 10,000W Peak
• 5,000W RMS
• Poly-ether Wide Edge Surround
• Triangular Lattice Design
• Spider Ring Design for Increased Linear Spider Position
• PSP Terminal for Easy and Quick Wiring
• Aluminum Bobbin Voice Coil

(8)

$2199.99

Related Searches


P3D2-12 small

Item added to your cart.

Price: $179.99

Essential add-ons
Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

$9.99

Add to cart
NVX SDTK20

20 Square Feet of Sound Damping Material

$89.99

$59.99

Add to cart
Stinger RKXTK

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

$209.00

$79.99

Add to cart
Dynamat Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX SDRLR1 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$9.99

$7.99

Add to cart
NVX SDRLR2 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$14.99

$8.99

Add to cart
Belva BAMMD1

Six Function Digital Multimeter

$14.99

$6.99

Add to cart
Belva BAMMD3

Nine Function Digital Multimeter

$29.99

$9.99

Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back