See all parts that fit your 2000 Excursion
Five Sheets of 18" x 32" (20 sq. ft.) Tri-Layer Sound Damping Adhesive Black Foam Rubber
Product highlights
• Five Sheets of 18" x 32" (20 sq. ft.) Tri-Layer Sound Damping Adhesive Black Foam Rubber
• Tri Layer Design: Combines 100% Butyl Rubber, aluminum Foil, and Foam
• Total Thickness: 1/8 inch
• Easy to install self adhesive sheets
• Built to withstand temperatures of -40℉ to 300℉
• Perfect for applications on the roof, firewall, floor, quarter panels, doors, and more
Item Condition - Open Box, Great:
This product works like new, is well-cared-for and in great condition. May show limited signs of wear or use and may be missing non-essential parts, accessories or original packaging.
Sound damping can be a very beneficial accessory to reduce noise and vibration. To take full advantage of this soundproofing, read these instructions carefully and follow them till the end. It’s important to familiarize yourself with all the details to install the sound damping correctly. Incorrect installation will result in less than desirable results.
Step #1
The first step is to decide which location in your car you want to insulate. These locations include the floorboards, roof, door panels, trunk or firewall. We recommend soundproofing all metal surfaces for maximum sound deadening performance. Next, refer to your vehicle’s service manual for information on how to dismantle the trimming panels. Be careful when removing the panels to avoid breaking the fixing clips.
Step #2
Once the trimming is dismantled, remove the remainder of the factory insulation if it is damaged. If it is still intact, there is no need to permanently remove it. Next, you need to properly clean, dry and degrease the prospective surface. Sound deadening won't adhere properly if applied to a wet or dirty surface. Use a metal surface cleaner or degreaser along with a dry, clean rag. Make sure to use gloves and apply the degreaser in a well-ventilated space.
Step #3
For this step, measure the prospective surface you are going to treat. To make things easier, make a template of the appropriate size on a large sheet of paper and then transfer it to the damping material. That will make it easier to install it more accurately and avoid wasting material. Use a utility knife to cut the desired shape and size. Be careful and use gloves to protect your hands.
Step #4
Place a sheet of sound damping to the surface without removing the protective film. If it covers the surface properly, you are ready to install it. Gradually remove the protective paper film as you apply it to the surface for better adhesion. Once on the surface, press it down firmly until it is set in place. Flatten it with your hands to avoid unnecessary air bubbles. Use a rolling tool like the NVX SDRLR1 to press the mat down to the metal surface. Go across the entire surface with the roller to ensure that the sheet is installed properly.
Step #5
Once all sound deadening is in place, simply reinstall all trim pieces and carpet back to its original placement. Now you are ready to enjoy higher sound quality with fewer vibrations.
Manufacturer:
Model Number:
SDRF20-2
Weight:
20.00lbs
Internal SKU:
ls-sdrf20-obc9
Internal Product ID:
181891
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Belva Five Piece Installer's Panel Removal Tool Kit
Assists in removing door panels, vehicle upholstery, and many other parts of the car.
(73)
$11.99
List price $18.99
NVX Black Handle Stainless Steel Utility Knife
A must have when installing sound damping material
(1)
$3.99
List price $9.99
NVX SDRLR1 Rubber Sound Dampening Roller
2-inch Professional Heavy Duty Roller for Sound Dampening
(126)
$10.99
List price $13.99
NVX VCW104 - Open Box, Good Condition (Used)
750W 10" VC-Series Dual 4-ohm Car Subwoofer Open Box Complete (Good, Used)
$149.99
List price $219.99
FLI Trap Active Dual 12" Amplified Loaded Subwoofer Enclosure
(6)
$129.95
List price $349.95
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
