Kicker 48DCWR122 + Rockford t750x1bd Amplifier + 4 Gauge NVX Amp Kit

Product Details:

• Ported enclosure with 2 12" CompR Series Subwoofer
• Medium-density fiberboard construction covered with Carpet
• Power Handling:
• Peak: 2000 watts
• RMS: 1000 watts
• Final Impedance: 2-ohm
• Polypropylene cone
• Ribbed Santoprene surround
• Extensive internal bracing
• Suspension and heat management system
• Vented back brace design
• Forced air-cooling increases cooling to 25%
• Front-facing tuned port design
• Frequency Response: 25 - 500 Hz
• Sensitivity: 95.8 dB
• Dimensions: 32-3/8" L x 16" H x 14" W x 17-1/4" W2
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• Power Series Class BD 1 ohm Stable Monoblock Amplifier
• RMS Power Rating:
• 4 ohm: 500 watts x 1 channel
• 2 ohm: 750 watts x 1 channel
• 1 ohm: 750 watts x 1 channel
• Total RMS power output: 750 watts
• Power, protect, input, and output LED visual indicators
• Wired bass level remote control with optional Rockford Fosgate PLC2
• Speaker-level (high-level) inputs
• Remote-Out feature when using high level inputs
• Upgraded RCA connectors
• Differential inputs with high level auto turn-on feature
• Constant Power provides instantaneous delivery of output over varying impedance loads
• Real time thermal sensing with Rollback technology
• Dual extruded heat sinks
• Discrete surface mount technology
• Dual fan cooled
• All other normal Rockford protection schemes
• Top mounted controls
• CEA-2006 and CE compliant
• C.L.E.A.N. input/output clip detection and indicator LEDs
• Input sensitivity: 150mV - 12 volts
• Frequency Response: 20 - 230 Hz
• Total Harmonic Distortion (THD): 1%
• Signal to Noise Ratio: 90 dB
• Variable low-pass filter: 50 - 250 Hz
• Subsonic filter: Fixed at 28Hz @ 12dB/Octave
• Variable Bass Boost: 0 - 18 dB
• Fuse Rating: 100A
8 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 4.3" L x 8.3" W x 1.6" H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty
• MFR #: T750X1bd

Product Details:

• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
• Designed for car audio systems up to 1500 watts RMS
• Made from 100% Oxygen-Free Copper (OFC)
• Tinned conductors for corrosion resistance
• Pre-installed black nylon mesh covering protects the power wire from damage
• Solid brass and satin chromed ANL/Mini-ANL fuse holder offers ideal protection for high-powered systems
• Pre-terminated seamless power and ground ring terminals provide reliable performance
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• CEA-2015 and BC5W2 compliant
• V-Series RCA Interconnect Cable
• Shielded noise-rejecting coaxial construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Twisted-pair construction featuring two conductors per channel
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
2. 3 ft. Frosted Black 4 gauge ground wire with seamless crimp ring terminal
3. 17 ft. Clear 18 gauge remote lead wire
4. 20 ft. Frosted Black/Blue 16 gauge speaker wire
5. One 16.4 ft. 2-channel dual twisted construction RCA interconnect Cable (NVX XIV25)
6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 100 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 4 Gauge Nickel Plated spade terminals
9. Four 18 Gauge Spade terminal
10. Two 18 Gauge Red butt connectors
11. Four 16 Gauge quick disconnect
12. Five 16 Gauge Nickel Plated spade terminals
13. Two Heat Shrink tubes with the NVX logo
14. Ten 6" Black zip ties