100W Peak (70W RMS) 4" C1 Series 2-Way 4-ohm Coaxial Car Speakers
Product highlights
• 50 watts Peak Each, 35 watts RMS Each
• 0.75" Silk-suspended aluminum Edge-Driven Dome Tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 87.5 dB
Item Condition - Open Box, Good:
This product is used, but it will work like new and is in overall good condition. It will show signs of wear that can include scuffing, scratches, fingerprints, dents, and worn corners or installation marks. May be missing non-essential parts, accessories or original packaging.
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
To facilitate fit, breakaway mounting tabs on the woofer frame allow the C1-400x to be installed in four-hole or two-hole mounting configurations.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-400x is a proprietary, stamped, steel 4-inch (100 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
Priced Per Pair
Best selling similar products
JBL Stage3 427F (STAGE3427FAM)
• 150 watts Peak Each, 30 watts RMS Each
• Edge-driven Dome tweeters
• Polypropylene cone material
• Impedance: 3 ohm
• Sensitivity: 90 dB
(3)
$69.95
List price $89.95
• 150 watts Peak Each, 50 watts RMS Each
• 1" PEI (Polyetherimide) Dome tweeters
• Glass Fiber cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
$80.95
List price $80.95
• 150 watts Peak Each, 20 watts RMS Each
• 0.43" Balanced Dome tweeters
• Injection Molded Polypropylene with Aramid Fiber Composite cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(14)
$65.00
List price $70.00
• 60 watts Peak Each, 30 watts RMS Each
• 1/2" Silk Dome tweeters
• Vacuum polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB
(11)
$64.99
List price $64.99
• 150 watts Peak Each, 75 watts RMS Each
• 1/2" Silk Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
(2)
$84.96
List price $119.99
• 50 watts Peak Each, 35 watts RMS Each
• 0.75" Silk-suspended aluminum Edge-Driven Dome Tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 87.5 dB
(8)
$89.99
List price $89.99
• 120 watts Peak Each, 30 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material with Extended Voice Coil (EVC) technology
• Impedance: 4 ohm
• Sensitivity: 88 dB
(2)
$62.99
List price $69.99
• 140 watts Peak Each, 45 watts RMS Each
• 0.8" Cloth Soft Dome Tweeters with in-line crossovers
• Interlaced Carbon-Glass Fiber Composite - IMPP cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB
(2)
$89.95
List price $120.00
• 150 watts Peak Each, 50 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome Tweeters
• Polypropylene cone material
• Steel mesh speaker grilles included
• Impedance: 4 ohm
• Sensitivity: 88 dB
$59.96
List price $79.99
• 230 watts Peak Each, 50 watts RMS Each
• 1" PEI (Polyetherimide) Hard Dome tweeters
• Carbon and Mica Reinforced Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(2)
$89.99
List price $110.00
Internal Product ID:
211948
| 5 star |
|
0% |
| 4 star |
|
100% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
NVX SDBSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(40)
$14.99
List price $18.74
NVX SDSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(103)
$9.99
List price $18.74
NVX SDBPRO20 20 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
$109.99
List price $143.99
NVX SDBBP40 36 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
(38)
$109.99
List price $131.99
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
(47)
$39.99
List price $47.99
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(115)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(18)
$11.99
List price $14.99
Belva BTK106 Trim Panel Remover
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(39)
$14.99
List price $19.99
Belva BTK105 Trim Panel Remover
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(69)
$11.99
List price $18.99
