See all parts that fit your 2023 Urus
(Open Box) 1600W 12" Dual 2 ohm T1 Power Subwoofer
12" Dual 2 ohm T1 Power Series Subwoofer • 1600W Max • 800W RMS • High Excursion TPE (Thermo-Plastic Elastomer) Surround • SWIFT Impedance Selection • Dual Opposing Spiders • Parabolic Triangular Cone Geometry
Learn more about the LS-t1d212-OB12" Dual 2 ohm T1 Power Series Subwoofer • 1600W Max • 800W RMS • High Excursion TPE (Thermo-Plastic Elastomer) Surround • SWIFT Impedance Selection • Dual Opposing Spiders • Parabolic Triangular Cone Geometry
Item Condition - Open Box, Great:
This product works like new, is well-cared-for and in great condition. May show limited signs of wear or use and may be missing non-essential parts, accessories or original packaging.
True Power You Can Feel
The T1D212 Power Series 12" Subwoofer by Rockford Fosgate has a peak power rating of 1600 watts and a RMS rating of 800 watts. This sub will produce some ground shaking bass and is constructed with a kevlar fiber reinforced semi pressed paper cone and a VAST santoprene rubber surround. This woofer is also equipped with Inductive Damping Heat Sink, this helps radiate heat to reduce the voice coil temperature and keeps the sub operating at a safe operating temperature when pumping out high amounts of SPL. Add some bumps in your trunk and enhance your cars stereo system with this Power Series Subwoofer.
SWIFT: Selectable Woofer Impedance Fused Termination
Making installation faster and easier, Rockford Fosgate developed SWIFT terminals. This system allows the nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. Removing and inverting the center plug, a Series or Parallel wiring configuration is accomplished. The removable jumper also provides fused protection in severe overload conditions.
IDHS: Inductive Damping Heat Sink
By securing the Inductive Dampening Heat Sink (IDHS) to the top of the magnet structure, Rockford Fosgate is able to improve the efficiency of their drivers. This is accomplished by reducing the amount of distortion and back Electro-Magnetic Force (EMF). The IDHS also radiates heat to reduce the temperature in the voice coil.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Manufacturer:
Model Number:
T1D212-OB
Weight:
35.00lbs
Internal SKU:
LS-t1d212-OB
Internal Product ID:
39769
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
NVX 25 ft. of True Spec 12 Gauge Speaker Wire
100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.
(56)
$29.99
List price $49.99
Belva 23 ft. of 12 Gauge Speaker Wire
Ultra-flexible PVC blended jacket for easy installation.
(43)
$6.99
List price $14.99
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!
(9)
$155.99
List price $339.00
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!
(54)
$210.99
List price $519.00
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
(47)
$156.95
List price $187.44
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(126)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
12-Volt Deep Cycle AGM Battery Power Cell with 750-Max Amps
(8)
$119.99
List price $199.99
12-Volt Deep Cycle Sealed Non-Spillable Lead Acid AGM Battery Power Cell with 3300 Max Amps (BCI Group 34)
(87)
$419.99
List price $429.99
750W 12" SE-X v2 Series Dual 2 ohm Subwoofer
$149.99
List price $499.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
