JL Audio BassWedge CP110-W0v3 (Open Box, Great)

JL Audio's single 10" slot ported loaded basswedge subwoofer enclosure has an RMS rating of 300 watts. This enclosure comes equipped with one JL Audio 10W0v3 single 4 ohm subwoofer that is constructed with a mineral-filled polypropylene cone material and a large roll surround. The subwoofer is loaded into high quality MDF slot ported enclosure that is covered in durable dark gray carpet with the JL Audio logo embroidered onto the top surface. This package will enhance your cars audio system immensely.

The W0v3, in and of itself, offers superb excursion capability, linearity and an overall performance output that puts it right at the top of its price class. The driver features a very beefy 2.0-inch diameter voice coil, a DMA-optimized motor system and JL Audio's patented Elevated Frame Cooling design - all purpose-engineered for enhanced power handling and reliability. What this also means, is your system will be immediately injected with the increase in output and better sound fidelity that one expects from a JL Audio product. In addition, excellent excursion capability and linearity allow it to reproduce sub-bass with striking extension and quality. When matched up with the proper power source, signal and setup the W0v3 is capable of a well rounded sound that is unparalleled by any other driver in its price range.

Flexible JL Audio Power

The 10W0v3 Subwoofer can be driven with as little as 75 Watts. However, for best audio performance it is recommended to run an amplifier capable of between 200 - 300 Watts of continuous power per driver, like the JL Audio XD300/1v2 or JL Audio JX500/1D. In addition, these subwoofers are optimized to operate in either a ported or sealed enclosure, needing only 0.65 cubic feet of air space in a sealed box and 1.125 cubic feet in a ported/vented enclosure. (Specific dimensions and figures can be found in the user manual, linked further below.)