See all parts that fit your 2025 G70
4" x 6" 3-Way GEAR Series Coaxial Car Speakers
Product highlights
• 4" x 6" GEAR Series Speakers
• 3-Way Coaxial
• 180W Max
• 90W RMS
• 4 ohm Impedance
• Poly-Injected Cone
• Butyl Rubber Surround
• 1/2" Neodymium Dome Tweeter
3.5" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$189.99
List price $211.99
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$179.95
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$156.99
List price $174.99
10" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$250.00
List price $275.00
Looking for top quality speakers at an affordable cost? Pyle has what you’re looking for. Equipped with a Poly-Injected yellow cone, these speakers give off a warm balance of frequencies that you won’t get tired of. There is an in-line capacitor built into these speakers that prevents low frequencies from damaging any internal components. The included grilles add protection from sun and from punctures. The steel basket eliminates sound waves that cause noise cancellation, resulting in a very clear sound output. With a 4 ohm impedance, these speakers pair perfectly with just about any car stereo or aftermarket amplifier. For a quality sound at a price that won’t sink your wallet, look to Pyle Audio.
Priced Per Pair
Best selling similar products
• 150 watts Peak Each, 50 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 83 dB
$79.99
List price $95.99
• 300 watts Peak Each
• 1" Mylar Dome Tweeters
• Low Mass Poly-Injection cone material
• Impedance: 4 ohm
• Sensitivity: 87 dB
(1)
$79.99
List price $99.00
• 150 watts Peak Each, 50 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
(15)
$59.96
List price $84.99
• 150 watts Peak Each, 50 watts RMS Each
• 3/4" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB
• Mounting Depth: 1.81"
(34)
$49.99
List price $59.99
• 60 watts Peak Each, 20 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Injection Molded Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(16)
$77.00
List price $128.00
JBL Stage3 6427 (STAGE36427AM)
• 175 watts Peak Each, 35 watts RMS Each
• Edge Driven Dome tweeters
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohm
• Sensitivity: 91 dB
(1)
$89.95
List price $109.95
• 150 watts Peak Each, 50 watts RMS Each
• 3/4" Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(7)
$90.00
List price $99.99
Rockford Fosgate Punch P1 P1462
• 70 watts Peak Each, 35 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Injection-molded Mineral-filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
(37)
$109.99
List price $109.99
• 120 watts Peak Each, 30 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
(8)
$64.99
List price $74.99
• 275 watts Peak Each, 40 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 86 dB
(9)
$59.99
List price $59.99
Manufacturer:
Model Number:
PLG46.3
Weight:
5.50lbs
Internal SKU:
plg463
Internal Product ID:
42921
| 5 star |
|
33% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
33% |
| 1 star |
|
33% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Surprisingly quick shipping
I purchased a set of Pyle PLG46 speakers almost 5 years ago. Recently one of the speakers began to rattle, and must be replaced. Since I've listened to the Pyles this long and never had a problem with the sound quality, I chose not to experiment with another brand and go with something I was familiar with.
Shipping from Sonic was surprisingly quick! I would recommend to a friend.
2 found this helpful
great for the price
Love um...look and sound great. Use an amp to get best sound especially for lows.. I use a powered woofer and the sound is just fine for my use..
aannnddd they're ripped
You get what you pay for. Hooked them up using the spec power ratings, and they tore in about a month. I bought them just as rear fill speakers and they did the job well at first, but not anymore. As for the sound quality when they worked, they sounded alright for the price, but you will definitely have better sound quality if you invest a little more money on another set of speakers.
NVX SDBSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(47)
$14.99
List price $18.74
NVX SDBPRO20 20 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
(4)
$109.99
List price $143.99
NVX SDBBP40 36 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
(39)
$114.99
List price $131.99
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
(51)
$39.99
List price $47.99
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(126)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
NVX 25 ft. of True Spec 12 Gauge Speaker Wire
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
(56)
$29.99
List price $49.99
Belva 23 ft. of True Spec 12 Gauge Speaker Wire
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
(43)
$6.99
List price $14.99
Belva BTK106 Trim Panel Remover
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(45)
$14.99
List price $19.99
Belva BTK105 Trim Panel Remover
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(73)
$11.99
List price $18.99
In-Ear Series Dynamic Headphones with noise isolating, 4 Ear Tips, Raised Dot for Side Indication
$44.00
List price $89.00
Recone Assembly for the 18" RE Audio XXX Subwoofers Dual 2 ohm
$129.99
List price $0.00
Digital Bass Reconstruction Processor with 4-Band Equalizer and Auxiliary Input
$109.95
List price $139.99
Recone Assembly for the 18" RE Audio SXX Subwoofers Dual 2 ohm
$109.99
List price $0.00
Recone Assembly for the 15" RE Audio SXX Subwoofers Dual 2 ohm
$99.99
List price $0.00
Recone Assembly for the 10" RE Audio SXX Subwoofers Dual 4 ohm
$99.99
List price $0.00
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
