2-Channel Amplifier w/ Controller For iPod/iPhone
• 2-Channel Amplifier w/ Controller For iPod/iPhone
• iPod/iPhone integration device with amplifier for most mobile application
• Great for motorcycles, boats, ATVs, UTVs, hot rods, golf carts, riding lawn mowers, tractors, snowmobiles, etc
• Included Blue-backlit remote is easily mounted
• 2-Channel Amplifier w/ Controller For iPod/iPhone
• iPod/iPhone integration device with amplifier for most mobile application
• Great for motorcycles, boats, ATVs, UTVs, hot rods, golf carts, riding lawn mowers, tractors, snowmobiles, etc
• Included Blue-backlit remote is easily mounted
Why Choose Kicker Amplifiers:
Kicker Performance Audio has been around since 1980 and has been producing amazing products since then. Kicker’s drive to consistently produce products that not only are great but also push the standards of the car audio industry is very apparent in all series of their amplifiers. All Kicker amplifiers are CEA-2006 Compliant, assuring you are receiving a continuous certified RMS power rating. Kicker will always exceed the rated power because Kicker is notorious for under rating their amplifiers. So really you will be getting more power than you actually pay for, which is not true for other lower end performance amplifiers that generally over rate their amplifiers. Kicker amplifiers will provide a choice of three automatic turn-on modes; remote, DC offset, or signal sense, which make them compatible with any car audio system. Along with their high-density convection heat sink for extreme heat dissipation and high efficiency MOSFET power supply, Kickers amplifiers are great way to go when selecting the perfect amplifier for your car audio system.
Internal Product ID:
43596
Works great needs better remote
Install was super easy. The unit it self works great even with the cheap speakers I used. But sometimes the remote doesn't work. I don't know if the iPod is the problem or if it is the remote to blame. Overall I am pretty satisfied and would probably buy it again if I had it to do over.
18
found this helpful.Pxi 50.2 amp
Easy install and I like the remote control that comes with it. The only issue that I had with this installation on my RZR 800 was the ignition set up. I wired as directed according to the instructions to the ignition, but the amp would cut out and not work properly. Several other RZR owners encountered the same issue. I purchased a 10 amp toggle switch and ran the amp straight to the battery. Works perfect now! I would definitely recommend this amp. I run my MP3 player and sounds great with the 6.5" kicker speakers.
17
found this helpful.Perfect for this application
Works great, easy install, using on polaris razor all models, ideal while riding trails. Have bought 3 for myself and for friends and going to buy 3 more. Sonic is my first stop for audio, they are the BOMB!
14
found this helpful.Great product!
I installed this into my 1959 ford galaxie because I didn't want a aftermarket head unit making my dash look like junk. I installed the controls into the ash try so they could be hidden. This sounds great and didn't break the bank.
15
found this helpful.The PXi50.2 rocks!
I found some difficulty putting a pioneer head unit in my 2002 chevy impala, so I have this in place of a head unit. It was very easy to install, and it works very well! It powers a few speakers itself, and it even works with my 3 other KICKER amps. The only problem I experienced, is the buttons on the remote don't always respond the first time I press them. I definitely reccomend buying this if your vehicle won't work with a traditional head unit.
15
found this helpful.Awesome!
Installation is easy and straight forward. I am using this on my motorcycle through a helmet speaker system, and was getting a ground loop that was causing a hum. This is in no way the product's fault, but rather a problem with hooking multiple amp systems together on a motorcycle. Kicker's tech support was awesome and a Line Out Converter (which they suggested) fixed the issue and it works perfectly now.
Nice big buttons work easily with gloves, even my thick winter gloves, and the back-lit buttons are very easy to see at night.
12
found this helpful.Great amp
I put this amp on my heritage and sounds GREAT!!!!
11
found this helpful.Perfect for hotrods
The PXi50.2 works great for anybody that s building a hotrod with out having to install a head unit , it's compact and you can hide it under your seat and gives you the option of adding another amp for a sub....I ordered this from Sonic and I received this product two days later, these guys rock, I wouldn't have a problem buying anything from them again, I'm very satisfied !!!!!!!!
9
found this helpful.very sweet
Have mounted on my waverunner. Very nice setup with 4 speakers.
9
found this helpful.Best selling similar products
• 50 Watts RMS x 2 @ 4 ohms
• 100 Watts RMS x 2 @ 2 ohms
• 200 Watts RMS x 1 Bridged @ 4 ohm
• CEA-2006 Compliant/Preamp Outputs/LPF
• On Board Punch EQ
$219.99
• 100W x 2 Chan. @ 4 ohms
• 150W x 2 Chan. @ 2 ohms
• Built In NOMAD "Real Time" Analog Computer
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability
(6)
$249.99
• 440 Watt True RMS Output!
• Marine Certified 2-Channel Micro Class D Amplifier
• 150W x 2-Chan. @ 4 ohms
• 220W x 2-Chan. @ 2 ohms
• 440W x 1-Chan. @ 4 ohms
• 3-Way System Protection
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint
(14)
$159.99
• RMS: 200 Watts x 2 @ 4 ohms, 250 Watts x 2 @ 2 ohms, Bridged: 500 Watts x 1 @ 4 ohm
• Total Peak Power: 1000 Watts
• Class D IR Chipset with DirectFET Power Mosfet Output
• Wired remote bass level control included
• Ultra Compact High Density Aluminum Alloy Chassis
• Dimensions: 4.02" W x 6.61" L x 1.40" H
(1)
$249.95
• 250 watts x 2 channel @ 4 ohms
• 550 watts x 2 channel @ 2 ohms
• 1000 watts x 2 channel @ 1 ohm
• Total RMS Power: 2000 watts
• CEA-2006 Compliant
(1)
$199.99
Save up to 10 different vehicles in your garage