Scosche SA69

Sufficient, Not Efficient

Exactly sized to match, but the tweeter space is extremely difficult to utilize. I am unimpressed by the lack of instruction as to make that piece come out without the use of a drill &/or dremel which causes innaccurate shapes for the tweeter holes. It cannot be cut out, I am extremely strong, but cuts in those notches are innaccurate and too shallow to be effective. The piece (where a separate tweeter would be) is necessary in the case of coaxial speakers, but needs to be easily removable for the installation of separate speakers. Waste of money for this brand of adapter.

Works good

The item did what I required it to do, which is fit a 6'5" speaker in a 6'9" box.

SA69

Solid and clean, perfect if using for 5.25 otherwise have to Cut\saw the opening. I believe these should be sold in separate sizes for use of 5.12 or 6.5 as they are not 1 size fits all. Gave ease of use a 1 for this reason and I needed 6.5 and had to saw the circles bigger.

Better then nothing

this item is exactly as mention and shown. It worked great the only con to this product is the fact when you have to modify it i.e cut out the tweeter part it is pretty hard to do without the right tools. also all the holes dont line up so instead of mounting using all 4 bolts in the corners i had to choose 2 so its not fully attached but it still works.

good product

They worked well for adapting my 6x9 opening to 6.5" component speakers. Had to modify them a little because the holes on my speakers didn't match but the end result was nice and clean. Very sturdy.

not too bad

Not too bad, but installing 6.5"" speakers was a challenge. There are no provisions to make the hole bigger, so I had to hack away at it with my dremel, shaving away a little bit at a time until the speakers fit.

The plastic is nice and thick though, which is great once they are installed, but also make cutting that much more difficult.

exactly what I needed

Simple installation, good quality, haven't had any problems. I would recommend them to anyone.

Fit Great

Used the product to install door speakers in an 08 Dodge Avenger for a friend. Speakers fit perfectly in the mold and the mold fit perfectly into the door openings. There is a notch for the wires to fit through. I would recommend for any upgrade installation!

Awesome value!

Wanted to put 6.5 components all the way around the interior but i had 6x9s in the back, then I found these. They work great, had a small fitment issue with the tweeter holes but the holes are sized out already so I just had to dremmel em out. I would definitely recommend these especially to anyone with a 96 Accord!

What can you say about a flat piece of plastic?

I made them work, but these weren't the correct fit for a 2002-2006 Toyota Camry rear deck.

Fit like a glove.

Fit my 2003 Ram 1500 front doors perfectly. One issue I had with the Alpine component speakers I installed was that the 1.75'' dome tweeter would not fit next to the 6.5'' mid. I had to mount them in the door sail. Quality product made from quality material. Would recommend to a friend.

A must for circular speakers going into 6x9 opening.

Get if your putting round speakers into 6x9 opening. My 2006 Nissan Xterra has 6x9 front door speakers. These were a time saver!

Garbage!!!

Won't fit 6.5" speakers, utterly worthless. Don't bother wasting money, make your own adapters out of balsa wood.

Want to increase your cars SQ?

With speakers such as 6x9's the sound quality is drastically decreased when the midbass speakers are amplified because of distortion. With circular speakers the SQ is increased due to less or no distortion. I greatly sugguest this product for anyone buying aftermarket speakers.

Meets my needs

I needed something to help install a 6.5" speakers into an existing 6x9. This adapter meets my needs. I had to do some cutting using a Dremel tool. Product is very sturdy. No rattling, vibration, etc when I crank up the bass.