MTX Audio Thunderform F250X00C20A-TN (Charcoal, Amplified)
Ford F-250 Super Cab 2000-2007, Amplified 2 10" 4 ohms Vehicle Specific Thunderform Sub Enclosure
- Dual 10" Terminator Series Subwoofers
- Power Handling:
- Peak: 800 watts
- RMS: 400 watts
- Impedance: 4 ohm
- Polypropylene cone
- Rubber surround
- MTX Audio logo on dustcap
- 1-1/2" Aluminum voice coil
- 28 oz. Magnet structure
- Frequency response: 29 - 160Hz
- Sensitivity: 84.9 dB
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
- Dual 10" Sealed Loaded Thunderform Subwoofer Enclosure with built-in Amplifier
- For 2000-2007 Ford F-250 supercab
- Also fits 2000-2007 F-350 Supercab Trucks
- Mounts under the rear bench seat
- Jack stays in factory location and tools relocated to under the center of enclosure
- No loss of leg room
- Install hardware included
- Built-in 200 watt Class D Amplifier
- EBC and wire harness included
- Made of a high density polyethylene resin, which is flexible enough to transform into a variety of shapes and sizes, yet strong enough to avoid flexing
- Enclosure volume: 1.17 cubic feet, sealed
- Molded factory color is Charcoal
- Also available in: Black, Tan
- Dimensions: 10-1/4"D x 55-1/8"W x 7"H
Note: Since each MTX Audio Thunderform is custom made to order, it can ship within 2 to 5 business days. When ordering please allow enough time for the manufacturing and shipping of the product.
(newest, current model)
(previous model, replaced by MTX Audio Thunderform F250X00C20A-TN (Charcoal, Amplified))
(previous model, replaced by MTX Audio Thunderform F250X00C20A-T45 (Charcoal, Amplified))
Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.
Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.
If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile
Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.
Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.
Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.
Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Specials with this Item
Warranty and Return Policy
Internal Product ID
Wiring Diagram Legend
Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.