Hifonics BRX1516.1D 1500W RMS + 15" NVX VCW154 Subwoofer + Amp Wiring Kit

General Features:

• Brutus Series Monoblock Class D Car Amplifier
• RMS Power Rating:
• 4 ohm: 550 watts x 1 chan.
• 2 ohm: 900 watts x 1 chan.
• 1 ohm: 1500 watts x 1 chan.
• Wired remote bass level control included
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicator lights
• Preamp RCA ouputs allow for daisy chaining multiple amps
• Heavy duty aluminum alloy heat-sink with illuminated Hifonics logo
• Lighted connectors and blue wash of light
• 1-Ohm Stable operation
• 10 AWG speaker output connections
• Full-range Preamp RCA outputs to daisy chain multiple amps
  Full-range only if a full range signal is connected to input
• 3-way system protection circuitry (thermal, overload and speaker short protection)
• Input sensitivity: 200mV - 9V
• Frequency Response: 15 - 250 Hz
• Total Harmonic Distortion (THD): <0.10%
• Signal to Noise Ration: >95dB
• Variable low-pass filter: 35 - 250 Hz
• Subsonic filter: 15 - 35 Hz
• Variable Bass Boost: 0 to +10 dB bass boost at 45 Hz
• Variable phase: 0 - 180°
• Fust Rating: 70A Maxi x 2
• 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
• Dimensions: 9.8"W x 12.5"L x 2.4"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Also found as: BRX15161D, BRX1516-1D

Product Details:

• 15" Dual 4 ohm VC Series Subwoofer
• Power Handling:
• Peak: 3000 watts
• RMS: 1500 watts
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Die cast aluminum vented basket
• Dual progressive-roll spiders with integrated flat-braided leads
• 3" 4-Layer High Temperature Black Aluminum Voice coil
• Optimized high-velocity pole vent
• One-piece T-Yoke with integrated gap venting
• 202 oz. Triple Stacked High Energy Y35 Ferrite with protective rubber boot
• 23 mm Xmax (one-way) for massive air movement
• Frequency Response: 20 - 200 Hz
• Resonance Frequency (Fs): 31.30 Hz
• Sensitivity: 88 dB (1W/1m)
• Optimal sealed box volume: 2.00 cubic feet
• Optimal ported box volume: 3.5 cubic feet
• Top-mount depth: 8.19"
• Cutout diameter: 14.21"
• CTA-2031 Compliant
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty



Priced Individually

Product Details:

• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
• Designed for car audio systems up to 1500 watts RMS
• Made from 100% Oxygen-Free Copper (OFC)
• Tinned conductors for corrosion resistance
• Pre-installed black nylon mesh covering protects the power wire from damage
• Solid brass and satin chromed ANL/Mini-ANL fuse holder offers ideal protection for high-powered systems
• Pre-terminated seamless power and ground ring terminals provide reliable performance
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• CEA-2015 and BC5W2 compliant
• V-Series RCA Interconnect Cable
• Shielded noise-rejecting coaxial construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Twisted-pair construction featuring two conductors per channel
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
2. 3 ft. Frosted Black 4 gauge ground wire with seamless crimp ring terminal
3. 17 ft. Clear 18 gauge remote lead wire
4. 20 ft. Frosted Black/Blue 16 gauge speaker wire
5. One 16.4 ft. 2-channel dual twisted construction RCA interconnect Cable (NVX XIV25)
6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 100 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 4 Gauge Nickel Plated spade terminals
9. Four 18 Gauge Spade terminal
10. Two 18 Gauge Red butt connectors
11. Four 16 Gauge quick disconnect
12. Five 16 Gauge Nickel Plated spade terminals
13. Two Heat Shrink tubes with the NVX logo
14. Ten 6" Black zip ties